As i have a cunning plan (ok then, may be able to get hold of some stuff cheaper) for my MY99 STi 5 Type R Limited

I believe that the 6pot brakes are:
CP5570-1000:G8

and the 4 pots are:
CP5200-1023

(I have 17" Oz SuperT's so fitting shouldnt be a problem with the 330mm disks)

Please correct me if I am wrong?

Also;

What AP Clutch kit would I need? (car is currently somewhere around the 300lb/ft mark, and I will be looking to improve this figure - although not by too much maybe a max of 350lb/ft) and the standard one they list on the web-site is only rated at 310lb/ft).

Also, what is the part no. for a suitable borg and beck clutch (although these are owned by AP anyhow)

 

ttt - someone must know (please)?

 

You want the AP Organic clutch

It may only be rated 310lbs? - but the Organic one that I hae on can handle significantly more than this - Its doing ok handling over 400bhp/350lbs and has been for a couple of yrs now!

Re part no's - sorry a bit of a minefield so dont know

 

think i may have found the clutch on the AP page:

CP2000-18 Organic plate - CP6150-18 release bearing.

Hopefully these are the right parts, and hopefully I will find out that I can get all of them for a bargain price!!!