i have 3 defi gauges at the minute with a defi controller (boost/oil temp and oil pressure)

i also have a psi3 data monitor-do i buy a few more defis for fuel/battery etc or can the psi3 do that?

if so where do i get the sensors from for the psi3?

this is the unit i have

 

worry gauges..................just make you worry..............no need

 

hahaha never heard them called that before

havent you got a shed load of gauges?

 

gauges are pointless unless you know how to read them and you would be surprised how many dont.

oil temp and pressureand boost are a good idea then fuel pressure and wideband afr.

voltage etc are pointless id say in an everyday road car.

 

I got this defi link display as there wasn't any room for gauges in the hatch ,, does,, oil temp , oil pressure , water temp , fuel pressure , exhaust temp , speed , rev warnings and boost warnings and a few other things ,, very good , just links in to the controller as normal

 

i like that mate,looks subtle

do you need a shed load of sensors for it?

 

Whatever is plugged into your defi controller , ie if you want fuel pressure buy just the defi fuel pressure sender and wire to the controller and it displays it

One in the for sale section

 

yeah ive seen that matey,im guessing defi sensors are.................£££

 

About £35-50 a sender so a lot cheaper than the defi gauges lol

 

I'm fairly sure your psi3 will display loads more but you also have to buy the defi senders and wire them into it but iv never done one myself

 

ok mate cheers for the help,will have a think

 

the psi 3 reads a lot of stuff from the ecu unlike the defi display

 

Always wanted one but never had the room with a double din stereo and I'm only really worried about oil temp an pressure so the display worked well for what I want

 

not saying there is anything wrong with the defi, just saying they work slightly differently.

 

or not work................ive heard defi stuff can be a bit temperamental sometimes

 

really defi stuff is about the best gauge wise.

if you are planning on keeping the gauges i wouldnt bother with either the psi3 or the defi link as basically its just a digital version of what you have.

i had a psi3 a few years back and the issue with it i found was its not as easy to read as gauges and with gauges you can see all the readings at once.

 

i wouldnt mind a couple of gauges down the drivers side of the windscreen so i may possibly sell it,just leaves me with a nasty hole under the single din unit

 

buy a double din unit, another reason why i got rid of the psi3.

you already have the defi control unit so its not going to be overly expensive to buy whatever other gauges you need.

 

They do a nice dash pocket that matches the dash

http://www.rogerclarkmotorsport.co.u...?productID=470

 

thats quite cheap from them...........

 

i will add it to the ever growing list................

 

Sorry, but you have been misinformed.

 

Not very "eye level" is it?

 

Doesn't need to be as its got warnings that tell me if there is a problem and it tells me when its warm , other than that I watch where I'm going not my gauges