I know a bit about modding scoobies, but not as much as I would like.

Am I right in thinking you can replace a fog light with a hole in it which then feed directly into an induction kit? Sorry to make it sound so blunt.

Who does these kind of intakes and are they better than regular induction kits?

 

I think they are Morette headlights with the inner light popped out and an induction trumpet put in place, with a cold feed to the filter

 

https://www.scoobynet.com/scoobynet-...n-classic.html

 

I put one on my old scooby think I had the large 3" one not sure who I had it with tho but here's a pic

 

Your car looks stunning mate

 

You can find these spun trumpets all over ebay mate, they're basically a spun aluminium trumpet that you either cut into your existing fog cover for, or buy a specifically made one for the task.
Many just buy a second hand cover and chop it up, then tiger seal the trumpet into it.
To be certain nothing nasty enters the engine bay, for safety you can also put some gauze over the intake to stop bigger material going in there.
They come in a variety of colours etc.
Then just buy some flexi tube to run up the inner wing and into the engine bay. Some kits include everything you need, just google / ebay search it

 

Where did you get that number plate from???

Did you ever get pulled for it?

 

£8 off ebay

 

Wouldnt have the link where you bought it from would you? And was it straight forward enough routing it through?

 

Instead of going for a cold air feed, I bought a cheap inner wing induction kit, chopped the inner wing pipe so the filter doesnt sit too low, and then stuck on a massive KnN, keeping the original triangular intake snorkel or what ever its called, worked really well and made more power after the map, it was the only change I made.

 

Sorry sorry, should have said.....

Anyone got any hawkeye examples?

 

Yeah I got a couple pics that show mine, its currently raining so don't fancy grabbing any in the engine bay
This what you are after:

 

 

Quick question, wot splitter is that u got on the suub?

 

Where'd you guys get your ducts from? I'm guessing its an ht autos splitter. I have one too

 

Are you selling the splitter?

If not, any chance you could give me a link to get one?

Thanks

 

dabiscuit
Are you selling the splitter?

If not, any chance you could give me a link to get one?

Thanks

 

dabiscuit

Are you selling the splitter?

If not, any chance you could give me a link to get one?

Thanks

 

Sorry for the repeat question

 

Alas I am not as I've just fitted it! But search ht autos on ebay as their ebay prices are cheaper than their website prices

 

http://m.ebay.co.uk/sch/hta-subaru/m.html?isRefine=true

Here's the address for ht autos ebay shop. Enjoy!

 

With this in mind^^^^(the vid a few posts down) is it not just for cosmetic reasons? If so is there really any point in making it useable ie what's the point of the pipe work, wouldn't it be easier/cheaper to blank it of.

 

Blank off what mate?

 

Sorry, wasn't very clear. The rear of the cone/air intake that replaces the fog light cover.

 

I just wanted to cover fog lamps, but if you can do it constructively by getting a feed to the air intake then all the better