2005 wide track blob sti project
#41
Rite guys been a while aince last posted and done anything with car due to work commitments and lack of funds...
so car is off the road noe for the winter and me to get started on some work..
plans are
nex couple weeks the engine is coming out and rosssti off here is having my long engine, turbo and injectors
then my plans are to
. Find a used 2.5 forged engine good for 600bhp
. GT30 BILLET TURBO
.reverse inlet
. Front and rear adjustable arbs
. Twin plate clutch
. Headers, up pipe, downpipe and turbo ceramic coated
. Flocked dash
. Prosport gauges
. Wheels off to get referbed in chrome black by mags..
so busy next few months for me see what else I can come up with to do
thanks ryan
so car is off the road noe for the winter and me to get started on some work..
plans are
nex couple weeks the engine is coming out and rosssti off here is having my long engine, turbo and injectors
then my plans are to
. Find a used 2.5 forged engine good for 600bhp
. GT30 BILLET TURBO
.reverse inlet
. Front and rear adjustable arbs
. Twin plate clutch
. Headers, up pipe, downpipe and turbo ceramic coated
. Flocked dash
. Prosport gauges
. Wheels off to get referbed in chrome black by mags..
so busy next few months for me see what else I can come up with to do
thanks ryan
#42
Rite work began last night stripped out all coolent hoses, radiator, front bumper and fmic pipework
just bought a V3 engine to use the heads for the build. Im off to see brian at can at weekend hes got a 2.5 forged engine im hopefully having off him
will post some pictures up soon as I can
ryan
just bought a V3 engine to use the heads for the build. Im off to see brian at can at weekend hes got a 2.5 forged engine im hopefully having off him
will post some pictures up soon as I can
ryan
#45
Rite guys.. its been a while since I have posted and been able to work on car.. 7weeks!! Due to work commitments and working away alot...
forged engine build has gone out the window due to lack of funds .
So plan over next couple weekends are
turbo off and clocked
Up pipe sent off to brian at cams to be modded for 44mm tial ewg and screamer pipe to be fitted.
interior center console to be sent off to hydrocoat for some carbon dipping .
New alloy racing rad to be fitted
Whiteline front and rear arb sent off to be powercoated then fitted.
rear diff oil change
high temp brake fluid
brakes fitted all round
new clutch at the end hopefully twin plate
then off for map tweek in spring
forged engine build has gone out the window due to lack of funds .
So plan over next couple weekends are
turbo off and clocked
Up pipe sent off to brian at cams to be modded for 44mm tial ewg and screamer pipe to be fitted.
interior center console to be sent off to hydrocoat for some carbon dipping .
New alloy racing rad to be fitted
Whiteline front and rear arb sent off to be powercoated then fitted.
rear diff oil change
high temp brake fluid
brakes fitted all round
new clutch at the end hopefully twin plate
then off for map tweek in spring
#46
Rite today I have splashed out a bit and bought
V7 fully forged engine with spec C big port heads ported and polished long engine... already built not even run yet...
Exedy carbon twin plate clutch
picking engine up on saturday night going to go on engine stand and build it up ready to be put in car and run in... think im going to go for 1000cc injectors and Gt3071 billet standard location turbo ....
Bit of a splash out before xmas
V7 fully forged engine with spec C big port heads ported and polished long engine... already built not even run yet...
Exedy carbon twin plate clutch
picking engine up on saturday night going to go on engine stand and build it up ready to be put in car and run in... think im going to go for 1000cc injectors and Gt3071 billet standard location turbo ....
Bit of a splash out before xmas
#47
Picked up engine today... 3hour round trip but was well worth it..
Will post some pictures up tomorrow. My exedy twin plate also arrived.
Plan now is to start getting my old engine out and transferring parts I need onto my new engine ready to drop in...
This is spec of new engine
Semi-closed deck block bored to 92.5 mm with full plateau hone
Manley forged h beam con-rods with ARP bolts
True forged CP Promax race pistons, 92.5 mm with 3.5 thou running clearance.
Fully gapped CP rings
Tool steel lightened pins
ARP 11mm head studs
Brand new 12mm race oil pump
Genuine Subaru bearings
Spec C sump
Sti avcs heads fully custom ported and polished port pics added.
All new idlers
Gates timing belt
New WRC spec tensioner
New Race MLS 1.4 mm head gaskets
All new seals
Decided I'm going to go twinscroll with Cheveron Motorsport in Staffordshire ball bearing turbo..
Also going for
Billet fuel rails with RC850cc injectorsand WRC lines
Exedy twin plate clutch
D2 8pots
Plus loads more to come over next few months as will be doing the work myself
Thanks Ryan
Will post some pictures up tomorrow. My exedy twin plate also arrived.
Plan now is to start getting my old engine out and transferring parts I need onto my new engine ready to drop in...
This is spec of new engine
Semi-closed deck block bored to 92.5 mm with full plateau hone
Manley forged h beam con-rods with ARP bolts
True forged CP Promax race pistons, 92.5 mm with 3.5 thou running clearance.
Fully gapped CP rings
Tool steel lightened pins
ARP 11mm head studs
Brand new 12mm race oil pump
Genuine Subaru bearings
Spec C sump
Sti avcs heads fully custom ported and polished port pics added.
All new idlers
Gates timing belt
New WRC spec tensioner
New Race MLS 1.4 mm head gaskets
All new seals
Decided I'm going to go twinscroll with Cheveron Motorsport in Staffordshire ball bearing turbo..
Also going for
Billet fuel rails with RC850cc injectorsand WRC lines
Exedy twin plate clutch
D2 8pots
Plus loads more to come over next few months as will be doing the work myself
Thanks Ryan
#51
Standard engine sold and coming out saturday sold to fellow member on here.. then its to swapoing bits over that I need. Few bits im sending off to cupra jake for paint.
D2 8pots should arrive this week also hopefully get them fitted over xmas..
decided to go twinscroll now with Cheveron motorsport in stafford hopfully going to get one of there turbos.. then get them to set up the handling...
will post some pictures as I go weekend
cheers ryan
D2 8pots should arrive this week also hopefully get them fitted over xmas..
decided to go twinscroll now with Cheveron motorsport in stafford hopfully going to get one of there turbos.. then get them to set up the handling...
will post some pictures as I go weekend
cheers ryan
#55
Bought a few more bits today. Not much going to be done engine wise until after new year now when can have painted bits sent off to cuprajake..
got today
cosworth parallel fuel rails
Billet wrc fuel lines
custom oiler cooler with temp stat. Plan is to put it in inner wing. Hopw that next weekend get engine bay stripped of anything not needed
cheers ryan
got today
cosworth parallel fuel rails
Billet wrc fuel lines
custom oiler cooler with temp stat. Plan is to put it in inner wing. Hopw that next weekend get engine bay stripped of anything not needed
cheers ryan