my white spec d thread
#572
Last week I fitted my dads genuine hks ssqv 3, now I hated the sound but the car felt so much more crisp in terms of response, so I've ordered a recirc kit.
Once that's fitted I'm moving on to sound deadening and quieting down the interior, for a 2006 car it rattles like bloody mad,
Also want a zunsport/rb320 front lower grille
Once that's fitted I'm moving on to sound deadening and quieting down the interior, for a 2006 car it rattles like bloody mad,
Also want a zunsport/rb320 front lower grille
#573
Scooby Regular
iTrader: (5)
Join Date: Oct 2012
Location: North Yorkshire / Boston, MA
Posts: 1,907
Likes: 0
Received 1 Like
on
1 Post
I'm considering the same mini project. Need to do some research but I reckon seats, centre console and carpet out cant be too hard then get some sound deadening foam stuff down. It makes so much difference, I'm currently driving without a rear bench and the sound difference is massive!
#576
Scooby Regular
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
Subaru brake lines are a pain sometimes but they should have ( cracked ) off with the aid
( wurth penetrating oil - that stuff is excuse the pun - worth its weight in gold to me ,& has helped many an occasion / go back & give it another go jake
Your time , effort & commitment to this car reflects
Regards mic
( wurth penetrating oil - that stuff is excuse the pun - worth its weight in gold to me ,& has helped many an occasion / go back & give it another go jake
Your time , effort & commitment to this car reflects
Regards mic
#578
ive tried soaking them too bud,
ill see what our wurth rep says though
i have made a start on the sound deadening too,
inside the boot lid ive used deadening pads,
then the actual rear wheel wells i have added pads along the wells and the quarter panels, followed by foam sound barrier, then moved onto the rear door, only got one done
to do the door ive taken out the speaker as its pants, blocked the hole with deadenig pads and deadend the inside of the door, too, followed by adding a full sheet of the foam barrier,
will try and get pics tomorrow.
jake
ill see what our wurth rep says though
i have made a start on the sound deadening too,
inside the boot lid ive used deadening pads,
then the actual rear wheel wells i have added pads along the wells and the quarter panels, followed by foam sound barrier, then moved onto the rear door, only got one done
to do the door ive taken out the speaker as its pants, blocked the hole with deadenig pads and deadend the inside of the door, too, followed by adding a full sheet of the foam barrier,
will try and get pics tomorrow.
jake
#579
Scooby Regular
iTrader: (5)
Join Date: Oct 2012
Location: North Yorkshire / Boston, MA
Posts: 1,907
Likes: 0
Received 1 Like
on
1 Post
What have you bought for the deadening Jake? It seems like the options are endless.
Also, do you have the prodrive widetrack settings still? Getting alignment sorted next week so would be good to have a good starting point!
Also, do you have the prodrive widetrack settings still? Getting alignment sorted next week so would be good to have a good starting point!
#581
Scooby Regular
iTrader: (5)
Join Date: Oct 2012
Location: North Yorkshire / Boston, MA
Posts: 1,907
Likes: 0
Received 1 Like
on
1 Post
I was looking at something like: http://www.carinsulation.co.uk/produ...ate_insulation
No idea how much I'd need for the full floorpan, rear seat and boot/wheel arches AND the doors.
PM en route
No idea how much I'd need for the full floorpan, rear seat and boot/wheel arches AND the doors.
PM en route
#590
Well, ŵhat a nightmare of a day.
Set off at 1:30 to go to Dudley approx 1:30hr away.
But there had been a lorry jackknifed on the other side as we went down the m6. Got there at 4pm picked the seats up and set off.
Then we hit traffic. Sat for ages at junction 20. Finally got home about 8pm. What a crap trim
Well worth it though. Wr1 seats in mint condition.
Seats are in. No need to change the rails either.
No pics of them fitted but these are the seats
Also picked up this bad boy
Afterburner raptor.
Next is to get some wrx door cards like mine. Strip and retrim them in black alacatara
Jake
Set off at 1:30 to go to Dudley approx 1:30hr away.
But there had been a lorry jackknifed on the other side as we went down the m6. Got there at 4pm picked the seats up and set off.
Then we hit traffic. Sat for ages at junction 20. Finally got home about 8pm. What a crap trim
Well worth it though. Wr1 seats in mint condition.
Seats are in. No need to change the rails either.
No pics of them fitted but these are the seats
Also picked up this bad boy
Afterburner raptor.
Next is to get some wrx door cards like mine. Strip and retrim them in black alacatara
Jake
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM