My DIY widetrack track car build
#93
Scooby Regular
iTrader: (70)
Just a quick reply to the validity to the cage msa wise the cage in the shell that I brought which had been raced and obviously scrutinered was about as useful as a chocolate fire guard not in construckion but in the way it was fitted problem is you only find these things out if you ever need to use them and then its could be to late I'm now having a full weld in cage similar to yours which by the way look great and will pass even the busiest scrutiner so you have no worries there keep it up it look great
#94
Scooby Regular
Thread Starter
iTrader: (30)
Join Date: Dec 2008
Location: Oxfordshire
Posts: 2,602
Likes: 0
Received 0 Likes
on
0 Posts
Well overdue an update!!
Lack of updates have been due to me having to move out of the unit i had been renting and put the car in to storage.
I have since been building my own new unit in my so called 'spare' time. It's pretty much finished now, pics to follow.
While the shell has been in storage, i've been prepping and painting all the smaller parts ready to bolt on......
Before and after.
More updates to follow.
Lack of updates have been due to me having to move out of the unit i had been renting and put the car in to storage.
I have since been building my own new unit in my so called 'spare' time. It's pretty much finished now, pics to follow.
While the shell has been in storage, i've been prepping and painting all the smaller parts ready to bolt on......
Before and after.
More updates to follow.
#97
Scooby Regular
Thread Starter
iTrader: (30)
Join Date: Dec 2008
Location: Oxfordshire
Posts: 2,602
Likes: 0
Received 0 Likes
on
0 Posts
On Saturday i took a trip to see Matt at BM developments and cut out the inner wing sections that i needed from a hawk to face lift my shell.
I had a few hours on it this afternoon, so drilled all the spot welds, removed any sections i didn't need and offered them up.
Next up is clean up the shell and spot weld the inner wings and slam panel in, check all lines up, then painting!
I had a few hours on it this afternoon, so drilled all the spot welds, removed any sections i didn't need and offered them up.
Next up is clean up the shell and spot weld the inner wings and slam panel in, check all lines up, then painting!
#99
Scooby Regular
Thread Starter
iTrader: (30)
Join Date: Dec 2008
Location: Oxfordshire
Posts: 2,602
Likes: 0
Received 0 Likes
on
0 Posts
Had a few hours on it yesterday.
Tacked new panels in place then assembled the front end to check everything lined up correctly, Once happy i removed everything and welded.
Paint prep next.
Items on my shopping list are aero catches for the bonnet, front bumper side brackets & quick release fixings. I'm tempted to put a FMIC on but worried about it maybe getting damaged easily on track in the event of an off?
Tacked new panels in place then assembled the front end to check everything lined up correctly, Once happy i removed everything and welded.
Paint prep next.
Items on my shopping list are aero catches for the bonnet, front bumper side brackets & quick release fixings. I'm tempted to put a FMIC on but worried about it maybe getting damaged easily on track in the event of an off?
#101
Wow! That is awesome! I admire your project. So, from this I gather that one needs to decrease the weight of the actual car first so that it can go faster before any added bhp to the original car then make it safe for racing with the cage. Good stuff! I hope to get the knowledge and desire to do similar oneday. Hope to see it completed in the best manner possible.
#107
Scooby Regular
Thread Starter
iTrader: (30)
Join Date: Dec 2008
Location: Oxfordshire
Posts: 2,602
Likes: 0
Received 0 Likes
on
0 Posts
Yes they are slightly shorter. You can cut the blob ones down to suite but i thought it better to change the whole lot as it's easier to realign everything.
Last edited by super_ted; 18 June 2014 at 08:41 PM.
#118
Scooby Regular