Notices
ScoobyNet General General Subaru Discussion

ScoobyNet EJ20/EJ22//EJ25 ** ON Standard Internals ** LEADERBOARD

Thread Tools
 
Search this Thread
 
Old 30 March 2013, 09:20 PM
  #241  
jayallen
Scooby Regular
iTrader: (31)
 
jayallen's Avatar
 
Join Date: Jun 2006
Location: The Fabulist Hunter
Posts: 7,899
Likes: 0
Received 0 Likes on 0 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car

2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


4) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.

6) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

7) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)

8) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless

9) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


10) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

11) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

12) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

13) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

14) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

15) MrNoisy - 412bhp / 365 ft lbs, 2005 STI EJ20 stock internals @ 1.5 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC + Induction kit / Prodrive 3 port / Revolution 3" exhaust / ECUTek remap on Momentum by JGM (Daily driver) - and hopefully a bit more to come with a revised inlet hose and exhaust flange

16) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


17) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


18) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


19) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

20) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

21) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

22) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

23) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

24) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

25) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

26) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

27) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

28)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

29) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.



30) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

31) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)
Old 31 March 2013, 10:47 AM
  #242  
WhiteWagonMan
Scooby Regular
iTrader: (34)
 
WhiteWagonMan's Avatar
 
Join Date: Apr 2009
Location: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Posts: 1,419
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mickywrx
1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


4) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.

6) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

7) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)

8) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless

9) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


10) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

11) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

12) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

13) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

14) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

15) MrNoisy - 412bhp / 365 ft lbs, 2005 STI EJ20 stock internals @ 1.5 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC + Induction kit / Prodrive 3 port / Revolution 3" exhaust / ECUTek remap on Momentum by JGM (Daily driver) - and hopefully a bit more to come with a revised inlet hose and exhaust flange

16) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


17) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)

18) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


19) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

20) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

21) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

22) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

23) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

24) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

25) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

26) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

27) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

28)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

29) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.



30) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

31) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)


Mines still seems to be the highest powered car that's never been remapped.
Graph added.
Old 31 March 2013, 08:36 PM
  #243  
turboturner
Scooby Regular
iTrader: (6)
 
turboturner's Avatar
 
Join Date: Sep 2006
Location: Leeds
Posts: 490
Likes: 0
Received 0 Likes on 0 Posts
Default

Here is mine to add to the list....please.....not the best pick



Its going on SRR soon , So I'll bang that up when it happens.

Last edited by turboturner; 31 March 2013 at 08:42 PM.
Old 01 April 2013, 11:13 AM
  #244  
WhiteWagonMan
Scooby Regular
iTrader: (34)
 
WhiteWagonMan's Avatar
 
Join Date: Apr 2009
Location: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Posts: 1,419
Likes: 0
Received 0 Likes on 0 Posts
Default

Those avcs heads sure do produce some nice torque figures on a 2.0ltr engine,seeing as tho the 2.1/rotated GT30 build is on hold a may fit the JDM spec c heads i have to my current engine and max the **** out of it.
Old 01 April 2013, 04:08 PM
  #245  
MrNoisy
Supporting Member
iTrader: (28)
 
MrNoisy's Avatar
 
Join Date: Dec 2006
Location: The South
Posts: 4,096
Received 7 Likes on 6 Posts
Default

Alcatek fitment and mapping, along with a new Perrin inlet hose saw an additional 20bhp and 25ft/lbs netted at peak. Drives fantastic now

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


4) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


6) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.


7) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)

8) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless

9) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


10) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

11) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

12) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

13) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


14) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

15) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

16) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


17) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)

18) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


19) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

20) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

21) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

22) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

23) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

24) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

25) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

26) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

27) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

28)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

29) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


30) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

31) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)

Last edited by MrNoisy; 01 April 2013 at 04:58 PM.
Old 01 April 2013, 04:28 PM
  #246  
Dave-W-
Scooby Regular
iTrader: (10)
 
Dave-W-'s Avatar
 
Join Date: Apr 2010
Location: preston
Posts: 2,081
Likes: 0
Received 0 Likes on 0 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


4) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


6) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

7) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)

8) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, id1000cc injectors rcm headers , FMIC, andy carr mafless


9) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


10) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

11) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

12) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

13) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


14) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

15) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

16) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


17) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)

18) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


19) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

20) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

21) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

22) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

23) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

24) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

25) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

26) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

27) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

28)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

29) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


30) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

31) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)

Last edited by Dave-W-; 25 May 2013 at 01:23 AM.
Old 01 April 2013, 04:45 PM
  #247  
littlebit
Scooby Regular
 
littlebit's Avatar
 
Join Date: Jul 2011
Location: leicester
Posts: 328
Likes: 0
Received 0 Likes on 0 Posts
Default

Mines on 341bhp 330lbft on a 1999 uk turbo2000 td05 16g,3"japspeed decat system,hdi front mount,apexi big filter welbro pump,ecutek map by Racedynamix @1.3 bar on vpower
Old 01 April 2013, 04:49 PM
  #248  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Now this is getting interesting.....

We're really starting to see set-ups that are working better through a wider rev range than others. BHP is for braggers.... torque is for acceleration. Some of us have both.

Last edited by Shaun; 01 April 2013 at 04:50 PM.
Old 01 April 2013, 05:04 PM
  #249  
jayallen
Scooby Regular
iTrader: (31)
 
jayallen's Avatar
 
Join Date: Jun 2006
Location: The Fabulist Hunter
Posts: 7,899
Likes: 0
Received 0 Likes on 0 Posts
Default

My graph seems to have disappeared from the list...
Old 01 April 2013, 05:55 PM
  #250  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


4) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


6) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

7) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)

8) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


9) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


10) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

11) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

12) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

13) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


14) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

15) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

16) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


17) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


18) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


19) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

20) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

21) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

22) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

23) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

24) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

25) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

26) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

27) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

28)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

29) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


30) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

31) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)
Old 01 April 2013, 05:56 PM
  #251  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Originally Posted by jayallen
My graph seems to have disappeared from the list...
Old 01 April 2013, 08:25 PM
  #252  
turboturner
Scooby Regular
iTrader: (6)
 
turboturner's Avatar
 
Join Date: Sep 2006
Location: Leeds
Posts: 490
Likes: 0
Received 0 Likes on 0 Posts
Default

Would like to find some more Torque from mine on current set up. I think the 2inch cold side helps already.
Old 01 April 2013, 08:38 PM
  #253  
jayallen
Scooby Regular
iTrader: (31)
 
jayallen's Avatar
 
Join Date: Jun 2006
Location: The Fabulist Hunter
Posts: 7,899
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Shaun
Cheers Shaun...
Old 01 April 2013, 09:05 PM
  #254  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Originally Posted by turboturner
Would like to find some more Torque from mine on current set up. I think the 2inch cold side helps already.
It will be very interesting to see what you get at SRR, so to compare with runs made on the older software (I know the two versions give different figures and different curves and maybe even loadup differently)... when you going mate?

For a UK/EU engine it looks very good.

Have you got a boost graph for that run you can put up?

Personally I wouldn't be looking to push for anymore torque on a standard engine if I was you. My run was based on just under 1.8bar for peak boost. I could try 2bar to bash the torque up but don't fancy the engine taking too kindly to that for long. You gotta know when to be sensible and for me that's quite hard....... but then still being on the original OEM clutch is giving me some reality.
Old 02 April 2013, 09:59 AM
  #255  
banny sti
Scooby Senior
iTrader: (68)
 
banny sti's Avatar
 
Join Date: Oct 2004
Location: Type R
Posts: 16,598
Received 22 Likes on 16 Posts
Default

Originally Posted by Shaun
Now this is getting interesting.....

We're really starting to see set-ups that are working better through a wider rev range than others. BHP is for braggers.... torque is for acceleration. Some of us have both.
You've been spending too much time with John
Old 02 April 2013, 10:03 AM
  #256  
turboturner
Scooby Regular
iTrader: (6)
 
turboturner's Avatar
 
Join Date: Sep 2006
Location: Leeds
Posts: 490
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Shaun
It will be very interesting to see what you get at SRR, so to compare with runs made on the older software (I know the two versions give different figures and different curves and maybe even loadup differently)... when you going mate?

For a UK/EU engine it looks very good.

Have you got a boost graph for that run you can put up?

Personally I wouldn't be looking to push for anymore torque on a standard engine if I was you. My run was based on just under 1.8bar for peak boost. I could try 2bar to bash the torque up but don't fancy the engine taking too kindly to that for long. You gotta know when to be sensible and for me that's quite hard....... but then still being on the original OEM clutch is giving me some reality.
I'll find out boost graph to post mate, its around 1.8 bar for peak, I think we will try a couple of high boost runs but try and map around the 1.9 mark if it will sit there with stability/safety.

The car has run more power on the hubs a Aet, but its hard to convert a hub to flywheel for a accurate result.

I should be down in late april early may depending on my wife's spending habits.
Old 02 April 2013, 11:37 AM
  #257  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Originally Posted by banny sti
You've been spending too much time with John
And you've been spending too much time driving "lag monsters" to appreciate how a properly quick "road car" should perform!
Old 02 April 2013, 11:38 AM
  #258  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Originally Posted by turboturner
I'll find out boost graph to post mate, its around 1.8 bar for peak, I think we will try a couple of high boost runs but try and map around the 1.9 mark if it will sit there with stability/safety.

The car has run more power on the hubs a Aet, but its hard to convert a hub to flywheel for a accurate result.

I should be down in late april early may depending on my wife's spending habits.
Looking forward to the results!
Old 02 April 2013, 03:12 PM
  #259  
banny sti
Scooby Senior
iTrader: (68)
 
banny sti's Avatar
 
Join Date: Oct 2004
Location: Type R
Posts: 16,598
Received 22 Likes on 16 Posts
Default

Originally Posted by Shaun
And you've been spending too much time driving "lag monsters" to appreciate how a properly quick "road car" should perform!
****** stop rubbing it in, waiting on my bilstein coliovers been 4 weeks since I've driven it
Old 02 April 2013, 04:25 PM
  #260  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Old 02 April 2013, 07:52 PM
  #261  
jd5217
Scooby Regular
 
jd5217's Avatar
 
Join Date: Feb 2005
Location: over the hills and far away
Posts: 2,156
Received 1 Like on 1 Post
Default

jd5217 - 435bhp / 390lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / 97 octane & 16% meth (no vpower available)

Was running 446/370 on lower boost with V Power and 10% meth.

Still running fine after 6+ years
Old 02 April 2013, 08:28 PM
  #262  
scc28
Scooby Regular
iTrader: (1)
 
scc28's Avatar
 
Join Date: Feb 2012
Location: uk
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts
Default

SCC28
341 bhp
355 lb/ft
Forester XT 2005 55 EJ25
VF41- STI ic- Full decat and 2.5" back
v-power or tesco99
Powerstation Rolling Road

Last edited by scc28; 02 April 2013 at 09:08 PM.
Old 02 April 2013, 09:10 PM
  #263  
MartynJ
Scooby Regular
 
MartynJ's Avatar
 
Join Date: Jan 2006
Location: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Posts: 2,629
Received 3 Likes on 2 Posts
Default

Originally Posted by jd5217
jd5217 - 435bhp / 390lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / 97 octane & 16% meth (no vpower available)

Was running 446/370 on lower boost with V Power and 10% meth.

Still running fine after 6+ years
Graphs done on same day within 20 minutes or so of each other.




Old 02 April 2013, 09:34 PM
  #264  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

What did you last slave bitches die of?
Old 02 April 2013, 09:40 PM
  #265  
banny sti
Scooby Senior
iTrader: (68)
 
banny sti's Avatar
 
Join Date: Oct 2004
Location: Type R
Posts: 16,598
Received 22 Likes on 16 Posts
Default

Originally Posted by Shaun
What did your last slave bitches die of?
get them told!
Old 02 April 2013, 09:41 PM
  #266  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


4) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


6) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

7) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)

8) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


9) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


10) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


11) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

12) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

13) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

14) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


15) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

16) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

17) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


18) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


19) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


20) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

21) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

22) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

23) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

24) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

25) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

26) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

27) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

28) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

29) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


30)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

31) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


32) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

33) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)
Old 06 May 2013, 03:05 PM
  #267  
Tazz01WRX
Scooby Regular
iTrader: (1)
 
Tazz01WRX's Avatar
 
Join Date: May 2007
Location: South East london or Kent
Posts: 371
Likes: 0
Received 0 Likes on 0 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


5) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


6) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


7) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

8) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)

9) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


10) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


11) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


12) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

13) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

14) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

15) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


16) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

17) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

18) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


19) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


20) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


21) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

22) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

23) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

24) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

25) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

26) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

27) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

28) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

29) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

30) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


31)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

32) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


33) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

34) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)
Old 06 May 2013, 03:21 PM
  #268  
Tidgy
Scooby Regular
 
Tidgy's Avatar
 
Join Date: Sep 2004
Location: Notts
Posts: 23,118
Received 150 Likes on 115 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


5) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


6) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


7) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

8) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)

9) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


10) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


11) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


12) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

13) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

14) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

15) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


16) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

17) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

18) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


19) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


20) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


21) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

22) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

23) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

24) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

25) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

26) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

27) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

28) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

29) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

30) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



31) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


32)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

33) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


34) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

35) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)[/quote]
Old 06 May 2013, 08:29 PM
  #269  
Badger_88
Scooby Regular
iTrader: (5)
 
Badger_88's Avatar
 
Join Date: May 2012
Location: Norfolk
Posts: 353
Likes: 0
Received 0 Likes on 0 Posts
Default

370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix.
Old 07 May 2013, 10:34 AM
  #270  
MelTypeR
Scooby Regular
Support Scoobynet!
iTrader: (4)
 
MelTypeR's Avatar
 
Join Date: Mar 2002
Location: Hertfordshire
Posts: 876
Received 15 Likes on 14 Posts
Default

Here's mine guys


8) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)



Sorry not that handy with copy and pasting so will let Shaun update the list again


Quick Reply: ScoobyNet EJ20/EJ22//EJ25 ** ON Standard Internals ** LEADERBOARD



All times are GMT +1. The time now is 10:36 PM.