Notices
ScoobyNet General General Subaru Discussion

ScoobyNet EJ20/EJ22//EJ25 ** ON Standard Internals ** LEADERBOARD

Thread Tools
 
Search this Thread
 
Old 07 May 2013, 11:26 AM
  #271  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

You lazy git!! I'll do it later on a desktop if no one else does prior.

BTW... I'm going for the No.1 spot two weeks Thursday.
Old 07 May 2013, 11:31 AM
  #272  
banny sti
Scooby Senior
iTrader: (68)
 
banny sti's Avatar
 
Join Date: Oct 2004
Location: Type R
Posts: 16,598
Received 22 Likes on 16 Posts
Default

Originally Posted by Shaun
You lazy git!! I'll do it later on a desktop if no one else does prior.

BTW... I'm going for the No.1 spot two weeks Thursday.
I have the unoffcial number 1 spot
Old 07 May 2013, 11:33 AM
  #273  
Infected by sti
Scooby Regular
iTrader: (6)
 
Infected by sti's Avatar
 
Join Date: May 2012
Location: Cardiff
Posts: 3,221
Likes: 0
Received 0 Likes on 0 Posts
Default

What's the plan Shaun
Old 07 May 2013, 11:41 AM
  #274  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Lol @ Banny. the only thing that graph was no1 at was for being a lag monster!

Infected (sounds nasty),
You'll have to wait and see.

Last edited by Shaun; 07 May 2013 at 11:48 AM.
Old 09 May 2013, 08:42 AM
  #275  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


5) Shaun - 480bhp / 465lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Tracktive Solutions and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


6) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


7) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

8) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


9) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


10) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


11) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


12) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

13) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

14) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

15) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


16) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

17) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

18) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


19) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


20) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


21) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

22) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

23) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

24) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

25) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix


26) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

27) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

28) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

29) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

30) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

31) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



32) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


33)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

34) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


35) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

36) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)
Old 09 May 2013, 08:56 AM
  #276  
banny sti
Scooby Senior
iTrader: (68)
 
banny sti's Avatar
 
Join Date: Oct 2004
Location: Type R
Posts: 16,598
Received 22 Likes on 16 Posts
Default

Originally Posted by Shaun
Lol @ Banny. the only thing that graph was no1 at was for being a lag monster!

Infected (sounds nasty),
You'll have to wait and see.
Was well matched with the JDM 6 speed ratios, only people who dont know how to change down complain about lag
Old 09 May 2013, 09:22 AM
  #277  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Originally Posted by banny sti
Was well matched with the JDM 6 speed ratios, only people who dont know how to change down complain about lag
Only people who have zero driveability below 5k say that!

Love you Banny!
Old 09 May 2013, 09:28 AM
  #278  
banny sti
Scooby Senior
iTrader: (68)
 
banny sti's Avatar
 
Join Date: Oct 2004
Location: Type R
Posts: 16,598
Received 22 Likes on 16 Posts
Default

Originally Posted by Shaun
Only people who have zero driveability below 5k say that!

Love you Banny!
love you too!
Old 24 May 2013, 12:14 PM
  #279  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

A slight update on mine.





1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Shaun - 490bhp / 475lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Bob Rawle and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


6) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


7) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

8) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


9) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


10) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


11) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


12) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

13) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

14) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

15) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


16) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

17) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

18) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


19) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


20) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


21) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

22) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

23) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

24) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

25) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix


26) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

27) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

28) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

29) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

30) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

31) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



32) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


33)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

34) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


35) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

36) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)[/quote]
Old 24 May 2013, 05:56 PM
  #280  
WhiteWagonMan
Scooby Regular
iTrader: (34)
 
WhiteWagonMan's Avatar
 
Join Date: Apr 2009
Location: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Posts: 1,419
Likes: 0
Received 0 Likes on 0 Posts
Default

Sweet looking graph that shaun,thats an awesome torque figure from a 2.0ltr engined car mate,those JDM big port heads sure do flow well dont they.

I have some spec c heads to go on mine in the near future so hopefully my torque figure should hit the high 400`s if all goes well,i should also see a nice increase in spool over the standard sti v5/v6 heads that are on the car now.
Old 24 May 2013, 06:50 PM
  #281  
Blue by You
Scooby Regular
iTrader: (23)
 
Blue by You's Avatar
 
Join Date: Jul 2008
Location: In the fast lane
Posts: 3,458
Likes: 0
Received 0 Likes on 0 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Shaun - 490bhp / 475lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Bob Rawle and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


6) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


7) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

8) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


9) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


10) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


11) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


12) Blue by You - now have a Zen forged build so I guess that excludes me

13) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

14) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

15) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


16) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

17) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

18) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


19) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


20) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


21) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

22) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

23) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

24) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

25) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix


26) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

27) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

28) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

29) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

30) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

31) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



32) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


33)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

34) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


35) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

36) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)[/quote]
Old 24 May 2013, 08:02 PM
  #282  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Blue by You,
We can remove if you want, but the data is interesting, regardless of whether your vehicle has changed.

Can we keep it in?
Old 24 May 2013, 08:03 PM
  #283  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Originally Posted by WhiteWagonMan
Sweet looking graph that shaun,thats an awesome torque figure from a 2.0ltr engined car mate,those JDM big port heads sure do flow well dont they.

I have some spec c heads to go on mine in the near future so hopefully my torque figure should hit the high 400`s if all goes well,i should also see a nice increase in spool over the standard sti v5/v6 heads that are on the car now.
Thanks mate.... looking forward to your changes.
Old 27 May 2013, 07:12 PM
  #284  
Pez
Scooby Regular
 
Pez's Avatar
 
Join Date: Aug 2011
Location: Wiltshire
Posts: 95
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

Bit of a read this thread... Be interesting if someone done something like this but with using the original turbo as well as standard engine internals... But here goes with mine if someone could add it in please...

21) Pez 397 bhp /420 lbft / 2007 2.5 Hawkeye Type-UK / Original vf43/ Hyperflow Monster front mount + intake relocated to inner wing / full miltek exhaust system with de-cats and headers / hayward+scott up pipe / forge 1 bar actuator+dv / standard injectors/ vpower only / S4U Rollers - ECUTek by Bob Rawle

Old 29 May 2013, 08:41 AM
  #285  
Blue by You
Scooby Regular
iTrader: (23)
 
Blue by You's Avatar
 
Join Date: Jul 2008
Location: In the fast lane
Posts: 3,458
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Shaun
Blue by You,
We can remove if you want, but the data is interesting, regardless of whether your vehicle has changed.

Can we keep it in?
Yes you can keep the info.
I only commented to keep in line with the thread requirements of standard internals.
Old 30 May 2013, 01:51 AM
  #286  
Stevesbluewrx
Scooby Regular
Thread Starter
iTrader: (4)
 
Stevesbluewrx's Avatar
 
Join Date: Aug 2005
Location: Also known as The Gimp
Posts: 3,662
Likes: 0
Received 0 Likes on 0 Posts
Default

Hoping to get another run out on the rollers now my fuel line issues are sorted and exhaust leaks done.

So good results since I last looked on here.


Steve
Old 30 May 2013, 08:55 AM
  #287  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Shaun - 490bhp / 475lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Bob Rawle and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


6) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


7) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

8) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


9) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


10) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


11) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


12) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

13) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

14) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

15) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


16) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver

17) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

18) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


19) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


20) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


21) Pez 397 bhp /420 lbft / 2007 2.5 Hawkeye Type-UK / Original vf43/ Hyperflow Monster front mount + intake relocated to inner wing / full miltek exhaust system with de-cats and headers / hayward+scott up pipe / forge 1 bar actuator+dv / standard injectors/ vpower only / S4U Rollers - ECUTek by Bob Rawle

22) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

23) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

24) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

25) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

26) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix


27) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

28) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

29) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

30) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

31) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

32) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



33) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


34)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

35) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


36) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

37) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)

Last edited by Shaun; 30 May 2013 at 08:58 AM.
Old 30 May 2013, 08:59 AM
  #288  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

Originally Posted by Stevesbluewrx
Hoping to get another run out on the rollers now my fuel line issues are sorted and exhaust leaks done.

So good results since I last looked on here.


Steve
You looking to regain your 4th spot again then.
Old 30 May 2013, 11:55 AM
  #289  
MrNoisy
Supporting Member
iTrader: (28)
 
MrNoisy's Avatar
 
Join Date: Dec 2006
Location: The South
Posts: 4,096
Received 7 Likes on 6 Posts
Default

Originally Posted by Shaun
Originally Posted by Stevesbluewrx
Hoping to get another run out on the rollers now my fuel line issues are sorted and exhaust leaks done.

So good results since I last looked on here.

Steve
You looking to regain your 4th spot again then.
Have you finally regained some faith and love for the car then mate?
About time!
Who sorted all the leaks etc for you in the end then?
Old 30 May 2013, 05:44 PM
  #290  
stealthy55
Scooby Regular
 
stealthy55's Avatar
 
Join Date: Sep 2008
Posts: 1,103
Likes: 0
Received 0 Likes on 0 Posts
Default



graph from 3 years ago, laggy as **** but was fun, looking at other graphs shows how turbos have moved on, this was on a non billet 321v mapped by paul blamire, think it had 800cc injectors, motec ecu rcm headers/exhaust filter, e85 fuel (red lines) power was 534bhp torque was 475.8! 60-100 on this set up was 3.8 seconds in 4th gear!

Last edited by stealthy55; 05 June 2013 at 06:06 PM.
Old 30 May 2013, 07:12 PM
  #291  
Blocks85
Scooby Regular
 
Blocks85's Avatar
 
Join Date: Oct 2011
Location: Pewsey
Posts: 232
Likes: 0
Received 0 Likes on 0 Posts
Default



My 53 plate 2.0 Sti blob.
352hp/360 torque @1.3bar
Ported vf35 with forge actuator set to 1 bar base pressure,
Japspeed fmic, Japspeed de cat with lambda moved to downpipe, RAMAIR airfiltets induction kit, Japspeed headers, thermal inlet spacers, mapped by Martyn Jeffery @ enginyuner
Old 31 May 2013, 01:09 AM
  #292  
Stevesbluewrx
Scooby Regular
Thread Starter
iTrader: (4)
 
Stevesbluewrx's Avatar
 
Join Date: Aug 2005
Location: Also known as The Gimp
Posts: 3,662
Likes: 0
Received 0 Likes on 0 Posts
Default

[quote=Shaun;11104872]You looking to regain your 4th spot again then. [/quote]



Now Now Shaun. Now now.

I want to change to the latest AlcaTek ECU. Also have some Sunoco 260 GT Plus (109ron) I fancy trying too.

We will see. It's back to using for school runs next week so in no rush.


Steve

Old 31 May 2013, 01:11 AM
  #293  
Stevesbluewrx
Scooby Regular
Thread Starter
iTrader: (4)
 
Stevesbluewrx's Avatar
 
Join Date: Aug 2005
Location: Also known as The Gimp
Posts: 3,662
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MrNoisy
Have you finally regained some faith and love for the car then mate?
About time!
Who sorted all the leaks etc for you in the end then?

Kind of you rubber necked tool.



Steve
Old 02 June 2013, 09:04 PM
  #294  
MrNoisy
Supporting Member
iTrader: (28)
 
MrNoisy's Avatar
 
Join Date: Dec 2006
Location: The South
Posts: 4,096
Received 7 Likes on 6 Posts
Default

Originally Posted by Stevesbluewrx

Kind of you rubber necked tool.

Steve
Tit lol
Old 04 June 2013, 03:47 PM
  #295  
T20Driver
Scooby Regular
iTrader: (3)
 
T20Driver's Avatar
 
Join Date: May 2005
Location: Southampton(ish)
Posts: 494
Likes: 0
Received 0 Likes on 0 Posts
Default

1) WhiteWagonMan - 505 bhp / 456 lbft - 1998 v5 STi(JDM v8 STi EJ20 bottom end) SC42 Billet / Afterburner Vortex R 3" zorst / Vpower + 20% meth / RCM induction setup / WR1 DCCD 6 speed box / GTspec headers / Harvey smith uppipe / FMIC / AP Racing brakes / Fuelab FPR / Walbro 300 pump / lateral 900cc injectors / syvecs ECU / mapped by mr syvecs himself Pat Herborn / Scoobyclinic RR and Road mapped / daily driven road car


2) DazDavies 504bhp / 2005 JDM STI LM450 Billet, FMIC, PE800cc injectors, Syvecs Mapped by JGM Vpower and 15% meth


3) Tazz01wrx - 503.9 bhp - 2003 JDM STI - Vpower + 20% meth / SC46 billet twin scroll / 3" Milltek exhaust / Ecutek 800cc injectors / RCM fuel pump and RCM fuel rails and parallel setup with fuel lab reg / fmic / RCM induction kit / Syvecs ecu / SFS intake hose / Inlet manifold thermal spacers / Mapped by JGM.


4) Shaun - 490bhp / 475lbft - 2006 JDM 2ltr STI, 20% Meth Mix, Billet LM450, BRD Induction Kit, SFS Intake Hose, Hybrid FMIC, 800cc inj, 3" Miltek and standard ECU mapped by Bob Rawle and power figures from SRR. Predominantly road use, but is used for everything and anything, including public track days and competition use.


5) Stevesbluewrx - 482 bhp / 448 lbft - 2002 STi (EJ20) / MDX321T (BILLET T71) 3" RCM Exhaust (With Sports cat) / Vpower + 18% Meth / CAIK / SimTek/AlcaTek ecu / 2 way FPR with parrellel set up / Lateral 850cc injectors / Surrey Rolling Road / Jollygreenmonster ( Daily Driver)


6) Turboturner - 479.9 bhp / 470lbft - 2005 2ltr Euro STI, 20% Meth Mix, AET GTX3071, SFS Intake, K&N Filter, Cheapo Ebay Intercooler(coldside 2" pipe work), 850cc Lateral Inj, Ebay Fuel Rails, 10mm Inlet spacers, 3" Cobb Exhaust, GtSpec Headers, Harvey UpPipe, Simtek 1 Ecu, Mapped by the man JGM , Area 52 Rolling Road..+ Aet Hub Dyno which resulted in 422.9bhp at hubs, around 490+Bhp with drive train loss.


7) Scoobyken - 471/ 430lbft 2004 sti type uk/ vpower+20% Meth/ Sc42 billet turbo/ 740cc inj/ Lateral headers with harvey up-pipe, full 3in turbo back GRD race system/FMIC/ Simtek ecu mapped by JGM @ SRR weekend toy.

8) MelTypeR - 461bhp / 425 lbft (on V-Power only) 2006 Spec C / Litchfield LM450 (non billet) / 800cc injectors / 3" Miltek De-cat / Hybrid FMIC / SFS 3" intake / Simtek ECU / Mapped by JGM @ Surrey Rolling road (daily driver)


9) dave-w- 450 bhp 400.3 ftlbs (vpower only) Widetrack Blob STI, MDX321T Billet, 650cc injectors rcm headers , FMIC, andy carr mafless


10) DazDavies 449.2bhp 400ftlbs (vpower only) JDM Widetrack Blob STI, LM450 Billet, 800cc injectors, FMIC, Syvecs mapped @ 1.7bar


11) jd5217 - 446bhp / 370lbft / sti04uk / 2.0 ltr standard internals / MD195S / gt spec manifold / APS decat / 650cc inj fpr / fmic / simtek / VPower & 10% meth, mapped by EngineTuner, EngineTuner Dyno


12) Blue by You - 443/428, 2005 Sti, EJ20 stock internals, SC46, Perrin FMIC, 650cc, Syvecs, 20% meth, Milltek 3" decat, RCM headers, mapped by Racedynamix, RCM dyno / (daily drive + track)

13) Kas Spec C - 442.1 bhp/400 lbft 2002 S202 (EJ20) /MD321T with 1.4b actuator, FMIC, 750cc, AVCR, EcuTek, Decat, Equal length headers, 2.5" system/Vpower/Surrey Rolling Road/Jollygreenmonster (Standard engine)

14) JohnD 436bhp 390lbft 2003 STi MDX321H 650 inj. RCM induction, GTspec headers, Harvey up-pipe, Milltek 3" AVC-R, Japspeed FMIC, V-Power only. Mapped by JGM

15) MrNoisy - 432bhp / 385 lbft, (V-Power Only) 2005 STI EJ20 stock internals @ 1.55 bar, SC42 / GT Headers and Harvey up pipe / Lateral 650cc inj / HRC 290lph fuel pump / Japspeed FMIC & Induction kit / Prodrive 3 port / Revolution 3" exhaust / Alcatek mapped by JGM (Daily driver).


16) T20Driver - 426bhp, 391lbft, MY05 2.0 JDM STi, Billet LM420, Hybrid FMIC, BRD Induction, 800cc injectors, 3" Miltek decat, Bob Rawle map (Base map update only as Meggarom won't activate AVCS), V Power - daily driver


17) Paulo P (Paul), 421bhp, 360lbft, 2005 sti short motor, ported and polished sti 3 cylinder heads, MD321S turbo (hence the low torque due to lag on a 2 litre), nismo 740cc injectors, 76mm inlet under a much modified version 3 inlet manifold system, tubular headers, FMIC, AVCR, Power FC, Z32 MAF + a lot more!

18) chrispy200+, 410/410 @1.4bar on V power, v5 Type R with stock EJ257, MD555 76mm inlet, syvecs / Surrey Rolling Road,


19) Jayallen - 404 bhp / 370 lbft @1.5bar /2002 STi (stock EG20) / Andy F TD05 20G / FMIC / RCM Cone Filter / Full De-catted 3" System / Surrey Rolling Road / Duncan Graham( Was a Daily Driver)


20) Turbotits - 401bhp /370 ft/lbs - 2002 STI, 106,000 miles / AFP 18g / vpower(?) + 20% meth / 650cc inj / lateral headers and up pipe, APS CAIK / Simtek mapped by JGM


21) Pez 397 bhp /420 lbft / 2007 2.5 Hawkeye Type-UK / Original vf43/ Hyperflow Monster front mount + intake relocated to inner wing / full miltek exhaust system with de-cats and headers / hayward+scott up pipe / forge 1 bar actuator+dv / standard injectors/ vpower only / S4U Rollers - ECUTek by Bob Rawle

22) Deathlyreaper 396 bhp /360 lbft / 05 widetrack sti / sc46 / k&n typhoon / decat afterburner / gt spec headers / Harvey uppipe / fmic / dv less / 650cc inj / vpower / apt rollers - race dynamix

23) Henrik / 391bhp / 392 lbft / 2003 WRX / td05-20g, lateral 3 bolt headers, apexi intake, fmic, decat down pipe / v-power + 10% e85 / Simon's delta dash / (track-weekend)

24) eelz - 389 bhp / 355 ft/lbs , 2003 sti ,TD 05/06 20g Harvey smith hybrid turbo,WMS s/s headers,walbro 255,fpr,550's,fmic,3 port,Harvey smith up-pipe, k&n CAIK, full de-cat, Dyno-dynamics by Enginemapper momentum 99(daily driver)

25) Sonic93 - 380bhp / 360 lbft / V3 type r sti , standard internals and box, sc40 billet,rcm cone and trumpet / adjustable fpr / lateral injectors / Harvey up pipe / gt spec 3 headers / 3 inch exhaust / evlipse intake pipe / sim tec / fmic

26) Badger 88 - 370bhp/345lbft v-power+20% meth 352bhp/340lbft v-power MY00 uk 2000turbo classic standard untouched ej205 vf35 with forge actuator, decatted 3" open mouth downpipe, 2.5" exhaust system, cheap unequal headers, 650cc injectors, 3port, 255lph intank swirl pot inline Bosch 910, fuel lab regulator, hdi front mount, rcm k&n, alcatek ecu remapped by racedynamix


27) Stu.sti - 358bhp / 338lbft / 1.5bar / 03 sti / vf35 inner wing induction kit, full decat, nur spec r, walbro fuel pump / tesco 99 / delta dash (trackhound) / (weekend use, shops)

28) EqualizerCS - 355 bhp / 362 lbft / MY03 STI EJ20 / VF35 / Standard Internals / Standard TMIC / Aerys 3" Turbo-Back (300 Cells Cat) / Green Performance Cotton Air Filter / Walbro 255 l/h / Ecutek / Fuel 98 Octane / (Daily Drive)

29) Addi Monster - 352bhp 340lbft classic jdm impreza on standard box and lump, 16g fmic 440's with reg, GRP's rollers Dynamix map on simtek.

30) Doobs Scoob - 350.2 / 300lbft / 2000 UK Turbo (EJ20) / VF34 Hybrid / Hyperflow TMIC /VPower / Surrey Rolling Road / JGM. (Daily Drive)

31) Kedlestone - 346.9 / 320 lbft Newage WRX, Standard EJ20, Standard Gearbox, VF34, STI TMIC, Full 2.5 Decat, 550cc Injectors, Walbro Fuel Pump, APS Cold Air Induction, Simtek ECU Mapped by Pat @ SC on V-Power only. Daily Drive.

32) Tidgy - 341.4 / 315 lbft, my99 uk turbo, ppg gearbox, vf34, front mount, decat, autronics ecu mapped by scoobyclinic on v power



33) scc28 - 341 bhp / 355 lb/ft, Forester XT 2005 55 EJ25, VF41- STI ic- Full decat and 2.5" back, v-power or tesco99, Powerstation Rolling Road


34)Psycho Sport - 335/333 2005 Newage WRX. Sc36 16g Turbo, JGM remap, sti injectors, sti intercooler, sports cat down pipe, 2.5 inch system to tailpipe, ported and heat wrapped down pipes, decat up pipe. Run on VPower. Daily Drive

35) mickywrx - 329.4/289lb/ft MY94 WRX Standard EJ20, standard ECU, Standard TD05, Standard 380cc injectors, V Power only, 1bar boost, couple of bolt on's, NOT remapped. Daily driven and it's had some 1/4 mile abuse.


36) Chet123 - 323 bhp/320 lb/ft @ 1.4 bar 04 newage STI, K&N Panel Filter, 3 Port Solenoid, 255 Walbro Fuel Pump, Ported OEM Headers, Harvey Smith slip jointed Up-pipe, Afterburner 2.5" turbo back exhaust system incl. DP, Racedynamix Remap - Standard internals 550 injectors, TMIC all on V-Power

37) Wayne STI - 309.7 bhp / 300.9 lb/ft @ 1.42 bar, 2008 STI (EJ25) dual AVCS / Andy F TD05-20g / 3" Miltek turbo back (sports cat downpipe) / Japspeed FMIC & Induction / Perrin silicone turbo inlet. Block never split standard everything else. V Power only racedynamix map / PJ Motorsports Dynopack hub dyno (daily driver)
Last edited by Shaun; 30 May 2013 at 08:58.
Old 01 July 2013, 04:55 PM
  #296  
turboturner
Scooby Regular
iTrader: (6)
 
turboturner's Avatar
 
Join Date: Sep 2006
Location: Leeds
Posts: 490
Likes: 0
Received 0 Likes on 0 Posts
Default

Not had chance to get on SRR dyno yet, but had the car on hub dyno today to check a couple of things over.
Car did 428.9bhp at hubs. What's loss on 6 speed new ages.
Old 02 July 2013, 12:33 PM
  #297  
Shaun
Scooby Regular
Support Scoobynet!
 
Shaun's Avatar
 
Join Date: Mar 2000
Location: 5 beats 4 - RS3 Rulez!!!
Posts: 8,617
Received 22 Likes on 18 Posts
Default

About 485bhp at the fly.
Old 02 July 2013, 10:25 PM
  #298  
sonic93
Scooby Regular
iTrader: (16)
 
sonic93's Avatar
 
Join Date: Oct 2009
Location: borehamwood
Posts: 3,939
Received 2 Likes on 1 Post
Default

Whitewaganman what heads you running there mate? 505 bhp out of a sc42 is crazy very impressed
Old 03 July 2013, 09:03 AM
  #299  
WhiteWagonMan
Scooby Regular
iTrader: (34)
 
WhiteWagonMan's Avatar
 
Join Date: Apr 2009
Location: Trying to pull a 10 second 1/4 mile running a standard 2.0ltr engine...
Posts: 1,419
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by sonic93
Whitewaganman what heads you running there mate? 505 bhp out of a sc42 is crazy very impressed
Standard sti 5/6 heads matey,yeah it didnt do to bad at all really,and that was with a 4% corrected loss by the dyno,so in real world terms it would have been 520 ish 470 ish,i have some big port spec c heads to fit this autum so we should see a nice spool increase and maybe a bit more bhp.
Old 03 July 2013, 09:06 AM
  #300  
the shreksta
Scooby Regular
iTrader: (20)
 
the shreksta's Avatar
 
Join Date: Apr 2011
Location: hinckley
Posts: 8,445
Received 495 Likes on 339 Posts
Default

353.9bhp for me, will post spec/graph later


Quick Reply: ScoobyNet EJ20/EJ22//EJ25 ** ON Standard Internals ** LEADERBOARD



All times are GMT +1. The time now is 05:35 AM.