Mounting a tv on a plasterboard wall
#31
Former Sponsor
I've just googled "tv falls on child" OMG one child dies on average every two weeks due to TV's falling on them!
Last edited by specialx; 04 January 2012 at 05:16 PM.
#33
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 12,329
Likes: 0
Received 0 Likes
on
0 Posts
Right well both brackets are on the wall
The new Plasma bracket is up on the party wall
8X 10x100 Fischer fixings & 4x 8x85 wall anchors
Same as the original bracket downstairs
The 20"lcd is up on the plasterboard wall as well
Subject to some modiifcations lol
The original swivel & tilt bracket had 3 fixings in the vertical plane only ?? and weighed a ton lol
Its now a tilt only bracket and mounted in a 4 square configuration
I had to use spring toggles in the end. The other type just span out when i went to set them, so i changed to toggle types
Mart
The new Plasma bracket is up on the party wall
8X 10x100 Fischer fixings & 4x 8x85 wall anchors
Same as the original bracket downstairs
The 20"lcd is up on the plasterboard wall as well
Subject to some modiifcations lol
The original swivel & tilt bracket had 3 fixings in the vertical plane only ?? and weighed a ton lol
Its now a tilt only bracket and mounted in a 4 square configuration
I had to use spring toggles in the end. The other type just span out when i went to set them, so i changed to toggle types
Mart
#34
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 12,329
Likes: 0
Received 0 Likes
on
0 Posts
In my experience (airconditioning) I prefer these:
All can give issues though:
spring/toggle can work loose
Corkscrews sometimes don't bite well enough or split the plaster (unless a pilot hole is drilled first - even though they are supposed to be self drilling )
And the anchor bolts can just spin round
All can give issues though:
spring/toggle can work loose
Corkscrews sometimes don't bite well enough or split the plaster (unless a pilot hole is drilled first - even though they are supposed to be self drilling )
And the anchor bolts can just spin round
Your reccomended type didnt set lol...they just ripped a big hole in the surface of the plasterboard...
Just used spring toggles in the end
Mart
Thread
Thread Starter
Forum
Replies
Last Post
supshon
General Technical
2
03 October 2015 08:06 PM