The Prodrive makeover!!
Small update although not actual work lol,I now have all the braided lines/connections for the external fuel setup sorted and 6 speed setup I just put a deposit on[big thanks to Paul]
The fuel setup will be mounted on a carbon fibre plate on the alloy boot floor.
I also have been working on making my own custom inlet pipe,I got the samco from Clive and it had the outlets on it so I have cut them off and got some silicone rescue tape and wound the whole pipe so they are now covered over,it isn't finished as I run out of tape but I have ordered some more and will post a pic on completion.
I virtually have all the piece's of the puzzle now so I just need to find some time to put it all together
The fuel setup will be mounted on a carbon fibre plate on the alloy boot floor.
I also have been working on making my own custom inlet pipe,I got the samco from Clive and it had the outlets on it so I have cut them off and got some silicone rescue tape and wound the whole pipe so they are now covered over,it isn't finished as I run out of tape but I have ordered some more and will post a pic on completion.
I virtually have all the piece's of the puzzle now so I just need to find some time to put it all together
Well you best had, we've got a meet to go to!
Thread Starter
Scooby Regular
iTrader: (52)
Joined: Jun 2010
Posts: 11,769
Likes: 1
From: C+K MOTORS
I know bud,I'm seriously getting carried away with this build and I certainly have my hands full to finish it for the prodrive meet
But like I said I will get there and if the under pinnings have to wait until after then so be it.
But like I said I will get there and if the under pinnings have to wait until after then so be it.
Thread Starter
Scooby Regular
iTrader: (52)
Joined: Jun 2010
Posts: 11,769
Likes: 1
From: C+K MOTORS
Seriously Jay I wish I had more time spare mate,my business is so busy it's scary on times but with all these's parts and loads more I couldn't even be arsed to get out and picture it's killing me not being able to get on with it
Thread Starter
Scooby Regular
iTrader: (52)
Joined: Jun 2010
Posts: 11,769
Likes: 1
From: C+K MOTORS
Is this an alternator flip bracket?
http://i1206.photobucket.com/albums/...g?t=1343831138
Thanks
Ricey
text sent ;0)
http://i1206.photobucket.com/albums/...g?t=1343831138
Thanks
Ricey
text sent ;0)
Thread Starter
Scooby Regular
iTrader: (52)
Joined: Jun 2010
Posts: 11,769
Likes: 1
From: C+K MOTORS
Is this an alternator flip bracket?
http://i1206.photobucket.com/albums/...g?t=1343831138
Thanks
Ricey
text sent ;0)
http://i1206.photobucket.com/albums/...g?t=1343831138
Thanks
Ricey
text sent ;0)
Yes mate it's a Carl Davey flip bracket kit,very pricey imho BUT it does the job very well and looks the nuts as well
Thanks for doing a deal on the forge tank fella,much appreciated
Regards Ryan
Thread Starter
Scooby Regular
iTrader: (52)
Joined: Jun 2010
Posts: 11,769
Likes: 1
From: C+K MOTORS
Money will be with you tomorrow mate[did you send the email yet?]
Very tidy... just read through the whole thing,, don't know how i've missed this one. That front end is particularly good, what front bumper and splitter is that? with the wheel arches it looks so mean!
Thread Starter
Scooby Regular
iTrader: (52)
Joined: Jun 2010
Posts: 11,769
Likes: 1
From: C+K MOTORS
Cheers mate,it's a facelift classic bumper with time attack splitter,it will have some stainless braces in the middle section as well,hopefully it should look good when it's done.
Thread Starter
Scooby Regular
iTrader: (52)
Joined: Jun 2010
Posts: 11,769
Likes: 1
From: C+K MOTORS
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
Put the prices up for Ty then 
he can afford it 
Loving the Turbo selection, I was gutted to sell mine but it has gone to a good home! Has it been billeted?
he can afford it Loving the Turbo selection, I was gutted to sell mine but it has gone to a good home! Has it been billeted?
Thread Starter
Scooby Regular
iTrader: (52)
Joined: Jun 2010
Posts: 11,769
Likes: 1
From: C+K MOTORS
