Hi phill the mud flaps are from

http://www.performancecreations.co.uk/

They where £60 deliverd, when fitted I sent a photo of them on the car and they sent me £30 back so in total they cost me £30

 

take it the same fitment for the hatch? yep.

have you seen the price of the Kaylan ones... they look the same as the PVC ones lol

 

They are for the hatch phill, but Martin at SSS fitted them to the saloon with out any problems......

 

Here's one from the event at Pro Drive in October last year

 

I'm very tempted to get a set, they look wider at the sides than my std dealer fit ones.

 

the std dealer ones in my opinion are far to hard & not flexible enough. I like my Rally Armors to be honest

 

+1

and one of mine has the black film coating come off now. I had planned to wrap them all in Carbon Fibre.. but now I've seen the above I might buy the PVC ones that flex a bit more.

 

I agree with the hardness comment Rob however they do seem to be styled to fit better than the generics I've fitted to other cars. I think I'll live with mine till I rip one of them off.......which shouldn't be too long the way mrs kgt launches off the drive.

 

Think I'll get a set like Hughy's, they seem wider on the side for the fronts which protect the car better.

seen these though
http://www.evobits.co.uk/index.php?r...product_id=185

anyone also seen them on a car?

 

They look similar to the rally armor version ones.

that sti logo in my eyes is still far to big..

 

they look a lot of fixing for it, do they just self tap screw into the wheel arch plastic?

quite like the look though.

 

Rally Armor flaps require no drilling

 

I have the rally armour flaps fitted to my saloon and they are excellent. no drilling of the the existing arches.

they are a bit more expensive but are worth it. Some of the ones I have seen fitted for £60 are cheap crap.

 

when i got my hatch it had dealer ones fitted & where far to hard u could hear them scrapping going over speed humps etc took them off & fitted rally armour ones yes cost abit more but worth the extra cost

 

I here what you are saying parmin, but believe me if these where cheap crap then they would not be on my car, no doubt not has good as the rally armour ones but a close second IMHO.....

 

Hughy.. and half the price!!
do you have any more pix of the ones fitted to your car.. how do the brackets look from the other side and how high up do the come for protecting the sides?

 

Good question Phil as the Rallya rmour look to finish a bit low on the arch, but it might just be the pics. Hope somebody has got some big red rally flaps on a white car to see

 

back in the early days, v1 rally armors

 

cheers Rob.
how do the V2 look in comparison.. do they hang lower?

 

RA V2's as fitted to my saloon

 

Aaron dude, the RA's are on so no excuses know, get the turni's on that car!!!!

Side one, will sort the I trader out for the cargo net. Thing is last time I did an I trader rating it required the link to the for sale ad which wee don't have so not sure i can carry it out. You may have to set one up and then mark it as sold a few minutes later.

Cheers bud

 

Haha, trust me they are on the list, the long list that is. Was planning to fit last week but want to seal them with a few coats of poorboys first and ran out of time!

May try this week but hopefully it's exhaust time!

Ref the itrader, use the thread below.

https://www.scoobynet.com/subaru-444...l#post10976033

Cheers
Arron

 

Can anyone with an aftermarket exhaust please post up a shot of the rear (of their saloon) and confirm what size tail pipes they have, been looking at the H&S which come with 3.5" pipes but just want to make sure they fill the hole well enough as a lot of the US companies use 4" tail pipes.

Thanks
Arron

 

Nice one arron will get it done later when I'm on a laptop and not a phone.

Regarding the back box. If it helps I've got the Hayward and Scott back box on my hatch. Should be one or two pictures kicking around on here as a reference its the 2.5 system which I think the pipes are 3.5" on the exists, quick look on their site will confirm

 

Yep, its 3.5", some pics I have seen of it fitted though it looks a little on the small side compared to others I've looked at, but then is 4" too big!

 

don't forget. The prodrive pipes on the quad exhaust on the 330s are only 3.5" each. I bet 4inch on each pipe would look sick.

 

H&S



Tony's with the Miltek (prior to 340R setup)

 

Tony.s looks nice being bigger foot you think?

 

Cheers guys, mind made up and 4 x 4" pipes ordered, hopefully be on Saturday am, may have to go looking for some tunnels on the way home to hear the car for the first time!!!!

 

4x4" looks much better! Im leaning toward Milltek atm too!