ruckus racing

well, crap. i have 290mm solid disc rotors in the rear. thanks anyway for the help

Godspeed Brakes

iTrader: (259)

In that case your options are -

If you want to fit 2 pot rear brakes on , you either need the backplates from a 2001 onwards Sti or a version 4 or 5 Type R 2 door , the Subaru 2 pots or Brembo 2 pot rear calipers and discs will fit straight on without the need for a bracket.

If you don't want to do that , they you can fit the version 4 or 5 type R rear vented discs but with the 1993 to 1999 rear vented one pot calipers , this again will bolt straight on.

Keeping you existing backplates will not allow you to fit rear 2 pot calipers on

Cheers Ian

ruckus racing

new info needed. i have rear hubs for a 2006 WRX. what do i need now?

Godspeed Brakes

iTrader: (259)

A wand !

The WRX uses the same size shafts ect as a ' normal ' classic , both use the 160 diff , your car has the larger 180 diff , thicker drive shafts , larger bearing and handbrake , so the 2006 WRX hubs will not fit , you need the 2001 -205 STi rear hubs

Cheers Ian

ruckus racing

ok, so i'm getting my parts together for the upgrade... the larger brakes i have are...

Brembo 4/2
bolt pattern- 5x100
outer- 315mm
inner- 190mm

what do i need?

please help quickly

billy21

iTrader: (4)

Sorry but what would you need to fit the brembos to a version 6 type r wrc? I have the "Subaru" 4pots up from and 2pots on rear

Godspeed Brakes

iTrader: (259)

Hi
You don't need anything special , the rear STi brembo's will fit straight on
Cheers Ian

billy21

iTrader: (4)

Will I not need anything for handbrake either?

Cheers billy

Godspeed Brakes

iTrader: (259)

No , your car has the same handbrake size as the Sti Brembo's , your brakes will also fit straight onto the 2001 onwards STi
Cheers Ian

billy21

iTrader: (4)

Cheers for the help mate