Project track car something for the weekend !
#576
Scooby Regular
iTrader: (8)
Join Date: Feb 2009
Location: N/A
Posts: 2,310
Likes: 0
Received 0 Likes
on
0 Posts
Sorry just trying to get my head around the breather part, so 1 in that photograph is that blanked off, or just left open, the same goes for in the engine bay where the breather return would have connected?
The fuel tank breather venting to the atmos with a one way non return valve, would this not mean you can smell fuel?
It's just the breather bit that's confusing me, why do you even need the 3rd line on the OEM setup, could that not be a non return valve, does fuel actually travel down this line at all, surely the OEM fuel pump is sealed, so there must be some valve to the atmosphere in the pump?
Thanks
The fuel tank breather venting to the atmos with a one way non return valve, would this not mean you can smell fuel?
It's just the breather bit that's confusing me, why do you even need the 3rd line on the OEM setup, could that not be a non return valve, does fuel actually travel down this line at all, surely the OEM fuel pump is sealed, so there must be some valve to the atmosphere in the pump?
Thanks
Last edited by Saalro; 26 January 2018 at 03:41 PM.
#578
Scooby Regular
iTrader: (8)
Join Date: Feb 2009
Location: N/A
Posts: 2,310
Likes: 0
Received 0 Likes
on
0 Posts
Cheer man, oh and one more question, you've got a standard type non snap off boss haven't you, is it a Momo or OMP? If so can you measure me the length of it please.
Thanks
Thanks
Last edited by Saalro; 26 January 2018 at 03:41 PM.
#584
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
just started stripping and painting my inner arches today ,il post up pics tommorow when i get them done,i did the rear drivers arch today after removing the coilover and its come out fine to be honest got told i was being a bit **** ...!
#593
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
I removed the brackets that hold the rear ARB in place but the bolts snapped on one side so had to re drill and tap 8mm to fit new whitline brackets and rear anti roll bar .
#596
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
Had an early start today down the garage so decided to paint the front inner arches after removing front coilovers so as not to splash with paint
#597
#598
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
Just buy one Jon you know it makes sense , still loving every minute of it it's my way of unwinding after a working 2 weeks solid 12hrs a day