Front cage section fitted at last.

Cage mounted mirror fitted.

Went a bit BluePeter with some left over lexan and made the centre dash piece and a ECU bracket.

Bits fitted.


Battery wiring and fire extinguisher next.

 

Bit more..

Battery cable

Fire extinquisher

Seat trim

Ready to bolt window to frame

 

Anyone know which quick release boss is worth going for?? Ta

 

I was thinking for the same thing.I found this but don't know if anyone has fitted one of these on there impreza.
http://www.ebay.co.uk/itm/2209551617...84.m1423.l2649

 

They look good mate but I think they are Lifeline copys. Need something shorter. Cant find a boss/quick release combined anywhere!

 

Haven't looked at this thread in a while.... It's looking great

 

Thanks mate. After moving the battery to inside the engines playing up. On idle revs rise to 1800 every few seconds and its running super rich, black smoke? The Apexi is showing 5% injector then dropping to 0% and back up to 5%. Any ideas? Ive run the new + cable to starter motor and from there to the fusebox 12v connection feed. Ive earthed the battery - to the body and a seperate earth from engine to chassis. Thanks

 

Also does the ecu case need earthing? Thanks

 

great project thread,nice to see a diy built car.keep up the good work fella

 

Hi guys, major change of plans. Decided to buy a 05-07 Sti now so I will be stripping the car. Various reasons, need a day to day car and the whole trackday thing would be quite alot of grief and expensive. Gutted, but at the same time just having a road car and going back to shows/meets made my mind up. Check sales section for parts, cheers guys.

 

could you not just put a full interior in this??

 

Time for something newer mate. Done classics, always fancied a Hawkeye. Gave it some serious thought mind.

 

I am sure the new sti will look as unique and one of a kind as a classic
very impressed with your work,keep it up!!!!

 

I am intrested in your curved lexan centre panel for classic,are you going to sell???thnx

 

Got someone keen on dash with that included. Keep ya posted

 

shame to see you get so far with the car then it getting broken. But a good decision to change mate. Got any plans for the new one?

how much for the radiator delivered

Tom

 

Will have to make my own then,how did you make lexan curved??
Was thinking to make one of alloy,but not sure how to bend it,any suggestions???

 

Bit sad but i covered the original vents with cardboard and taped up tight. Then put plastic sheet on top and stuck in the oven so it formed the shape. Best to do slowly on low heat then smooth over with a skim of filler.