'HTAutos' ,What would you like us to Manufacture??
15 June 2010, 09:17 AM
#123
Scooby Senior
iTrader: (15)
Join Date: Jul 2005
Location: Club Chairman - West Mids Imprezas
Posts: 8,889
Likes: 0
Received 0 Likes
on
0 Posts
1. rear window vents with circular holes in, as found on evos and some rally cars
2. door card and rear seat replacement panels (plastic or carbon for both classic and newage)
H
2. door card and rear seat replacement panels (plastic or carbon for both classic and newage)
H
15 June 2010, 05:41 PM
#126
Not sure if has already been mentioned but...
How about a decent gauge pod that actually fits and doesn't clutter up the dash. Something like this:
This was previously made by autometer for lhd GD cars. It is no longer available.... how about something similar for rhd GC & GD cars?
How about a decent gauge pod that actually fits and doesn't clutter up the dash. Something like this:
This was previously made by autometer for lhd GD cars. It is no longer available.... how about something similar for rhd GC & GD cars?
15 June 2010, 07:29 PM
#127
Not sure if has already been mentioned but...
How about a decent gauge pod that actually fits and doesn't clutter up the dash. Something like this:
This was previously made by autometer for lhd GD cars. It is no longer available.... how about something similar for rhd GC & GD cars?
How about a decent gauge pod that actually fits and doesn't clutter up the dash. Something like this:
This was previously made by autometer for lhd GD cars. It is no longer available.... how about something similar for rhd GC & GD cars?
18 June 2010, 04:36 PM
#128
Scooby Regular
Join Date: Feb 2003
Location: CHIPP'N HAM
Posts: 3,931
Likes: 0
Received 0 Likes
on
0 Posts
Not sure if it's already been requested (not read the whole thread)
But what about a replacement lower panel/exhaust surround for the hatch... making it into a rear defuser? nothing too aggressive (like the FRS) but maybe 4 vertical fins? in either poly or carbon?
But what about a replacement lower panel/exhaust surround for the hatch... making it into a rear defuser? nothing too aggressive (like the FRS) but maybe 4 vertical fins? in either poly or carbon?
Last edited by scooby L; 18 June 2010 at 04:39 PM.
27 June 2010, 09:48 PM
#132
Scooby Regular
iTrader: (9)
Join Date: Apr 2010
Location: WIGAN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
i would really like to find someone who does the fins that go inside the rear spoilers
http://tsl-motorsport.co.uk/newsite/...009&detail=299
http://tsl-motorsport.co.uk/newsite/...009&detail=299
Last edited by NEILB1; 27 June 2010 at 09:53 PM.
28 June 2010, 11:45 AM
#133
I really want to ditch my rear seats but just taking them out looks so 'unfinished' a nice carbon covering would be super good
04 July 2010, 12:00 AM
#137
Scooby Regular
iTrader: (23)
Join Date: May 2006
Location: Rota Subzeros FOR sale!
Posts: 3,701
Likes: 0
Received 0 Likes
on
0 Posts
Copy of the chargespeed STi bottomline kit and rear bumper extensions for the Hawkeye!!
Voltex rear diffuser, Got one here to copy if you need too ;0)
Chargespeed BUGEYE front brake ducts!
Ricey
Voltex rear diffuser, Got one here to copy if you need too ;0)
Chargespeed BUGEYE front brake ducts!
Ricey
04 July 2010, 02:35 PM
#138
How about oem style badgeless grilles for all models?
Lower wheelarch spats (mudflappy things) as found on jdm classics (behind each of the wheels over the skirts and bumper spats)
I've also modified my own bumpers on my car maybe worth a punt
Front bumper extended at bottom and rear numberplate recess shortened (perfect for square plates) both could be produced on all the scooby models?
As mentioned previously bumpers that fit with FMIC is a good idea. Not everyone has the ***** to cut up their own bumpers
I'm also working on a D/S classic intake vent that looks more oem than the ones already on the market!!
Last edited by BLU; 04 July 2010 at 02:37 PM.
04 July 2010, 11:45 PM
#139
Scooby Regular
Join Date: Nov 2008
Location: rotherham
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Well, I'm glad it's not just me. I like the V-ltd on bugs n blobs but the sides just don't look right on a classic, that's what I reckon anyway.
Thanks for that Poechi, that's getting there. Ideally, if I'm not getting too particular, what I'd like is the modified sides of the v5 and round to the lower grill where it will then merge into the V-Ltd lip under the existing bumper line. This may even leave a gap which could like cool.
Here we go - found this - lets throw this into the mix.
Thanks for that Poechi, that's getting there. Ideally, if I'm not getting too particular, what I'd like is the modified sides of the v5 and round to the lower grill where it will then merge into the V-Ltd lip under the existing bumper line. This may even leave a gap which could like cool.
Here we go - found this - lets throw this into the mix.
05 July 2010, 10:52 PM
#140
Scooby Regular
Join Date: Oct 2005
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
a carbon or carbon look firewall would be great.been looking for one of these for ages,theyre like gold dust!!.ohhh,4got to say... for an 04 sti would be nice too!!. thanx ,pete.
09 July 2010, 09:53 PM
#145
Scooby Regular
iTrader: (9)
Join Date: Apr 2010
Location: WIGAN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
i would really like to find someone who does the fins that go inside the rear spoilers
http://tsl-motorsport.co.uk/newsite/...009&detail=299
http://tsl-motorsport.co.uk/newsite/...009&detail=299
still want these lol
10 July 2010, 07:25 AM
#148
Scooby Senior
iTrader: (15)
Join Date: Jul 2005
Location: Club Chairman - West Mids Imprezas
Posts: 8,889
Likes: 0
Received 0 Likes
on
0 Posts
ignore my comment about rear window vents like on the evo. Imprezas dont have a window frame, so this wouldnt work thinking about it lol
10 July 2010, 09:37 AM
#149
Scooby Regular
Join Date: May 2009
Location: Coventry, West mids
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
I think it's just me but, I'd be interested in -
GT Wing made to fit classics, (yea the big gay wing)
Rear bumper diffuser/vortex generator (I know you do one already but its not as aggressive as i'd like)
front bumper canards for classic.
arch extensions/fender flares
i.e the timeattack look.
GT Wing made to fit classics, (yea the big gay wing)
Rear bumper diffuser/vortex generator (I know you do one already but its not as aggressive as i'd like)
front bumper canards for classic.
arch extensions/fender flares
i.e the timeattack look.
Last edited by TurboNinja; 10 July 2010 at 09:53 AM.
10 July 2010, 09:57 AM
#150
Scooby Regular
Join Date: May 2009
Location: Coventry, West mids
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts