'HTAutos' ,What would you like us to Manufacture??
15 April 2011, 07:57 PM
#541
Scooby Regular
iTrader: (2)
Join Date: Jan 2006
Location: Belfast / Northern Ireland
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Haven't read the whole thread yet, so don't know if its been covered but 05 sti rear wheelarch extensions would be good. Sure, I could get them from the dealer but I am loathe to spend £100+ per side that they have quoted me, and they only come pre painted and my car isn't 05 onwards colour.
.... been searching for these (base and back) for ages and cannot find anything but WRC carbon fibre versions - for silly money 
16 April 2011, 06:49 PM
#543
Scooby Regular
Join Date: Jan 2010
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
17 April 2011, 10:15 AM
#553
Scooby Regular
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
I know you have made a different type of bumper vent for the bugeye Fter my last request but I would like to see you make some that are alot more like the orciari ones like on this very nice bugeye.
(Hope you don't mind me using a pic of your car mickey is so I will delete it)
(Hope you don't mind me using a pic of your car mickey is so I will delete it)
26 April 2011, 06:32 PM
#559
Scooby Regular
iTrader: (1)
Join Date: Jun 2008
Location: Reigate Surrey
Posts: 2,656
Likes: 0
Received 0 Likes
on
0 Posts
Not sure if this has been mentioned on this thread 
but what about producing a stainless steel or ali slam panel/ cooling panel. I'm not sure if your familiar with these but for the hawkeye they look very simple to me but very expensive. I think for the right price they would be very popular.
They have 2 benefits one creating more air flow through the radiator and two looking bling
but what about producing a stainless steel or ali slam panel/ cooling panel. I'm not sure if your familiar with these but for the hawkeye they look very simple to me but very expensive. I think for the right price they would be very popular.They have 2 benefits one creating more air flow through the radiator and two looking bling
26 April 2011, 07:51 PM
#560
Former Sponsor
Thread Starter
iTrader: (24)
Join Date: Jan 2009
Location: Hyde Manchester
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Not sure if this has been mentioned on this thread but what about producing a stainless steel or ali slam panel/ cooling panel. I'm not sure if your familiar with these but for the hawkeye they look very simple to me but very expensive. I think for the right price they would be very popular.
They have 2 benefits one creating more air flow through the radiator and two looking bling
but what about producing a stainless steel or ali slam panel/ cooling panel. I'm not sure if your familiar with these but for the hawkeye they look very simple to me but very expensive. I think for the right price they would be very popular.They have 2 benefits one creating more air flow through the radiator and two looking bling
The stainless steel work we sell are made for us by another company, something that size may be expensive? How much do they sell for?
Mark
26 April 2011, 08:14 PM
#562
Scooby Regular
iTrader: (1)
Join Date: Jun 2008
Location: Reigate Surrey
Posts: 2,656
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mark the cheapest I have found is here
http://cgi.ebay.co.uk/Subaru-Impreza...item27ba617523
Maybe a plastic one, don't think temperature would be a problem I would gladly test one 
Or aluminum, I suppose a steel one is better looking but if its cheap enough to do in plastic recon its a great mod if the cost is right.
Some company's are charging £45.00 for the stainless steel and £100.00 for Carbon!!!
http://cgi.ebay.co.uk/Subaru-Impreza...item27ba617523
Maybe a plastic one, don't think temperature would be a problem
I would gladly test one Or aluminum, I suppose a steel one is better looking but if its cheap enough to do in plastic recon its a great mod if the cost is right.Some company's are charging £45.00 for the stainless steel and £100.00 for Carbon!!!
Last edited by greatgonzo; 26 April 2011 at 08:18 PM.
26 April 2011, 08:41 PM
#563
Former Sponsor
Thread Starter
iTrader: (24)
Join Date: Jan 2009
Location: Hyde Manchester
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Hi Mark the cheapest I have found is here
http://cgi.ebay.co.uk/Subaru-Impreza...item27ba617523
Maybe a plastic one, don't think temperature would be a problem I would gladly test one Or aluminum, I suppose a steel one is better looking but if its cheap enough to do in plastic recon its a great mod if the cost is right.
Some company's are charging £45.00 for the stainless steel and £100.00 for Carbon!!!
http://cgi.ebay.co.uk/Subaru-Impreza...item27ba617523
Maybe a plastic one, don't think temperature would be a problem
I would gladly test one Or aluminum, I suppose a steel one is better looking but if its cheap enough to do in plastic recon its a great mod if the cost is right.Some company's are charging £45.00 for the stainless steel and £100.00 for Carbon!!!
: 
29 April 2011, 07:45 PM
#567
Have you considered making a rear lip spoiler for the classics that it slightly bigger than those E46 M3 lips that some people use?
This guy in the US has started a project I like but development seems slow so I'm not sure if it ever will be available.
http://www.rs25.com/forums/f138/t141...1-replica.html
I'm fed up with high level spoilers so something smaller would be nice, not sure if the market is big enough though.
This guy in the US has started a project I like but development seems slow so I'm not sure if it ever will be available.
http://www.rs25.com/forums/f138/t141...1-replica.html
I'm fed up with high level spoilers so something smaller would be nice, not sure if the market is big enough though.
Last edited by Turbovin; 29 April 2011 at 07:46 PM.
29 April 2011, 08:14 PM
#568
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Just found that my rear diffuser has cracked around one of the front mounting holes and is flapping... dunx
P.S. Out with the big washers tomorrow...
30 April 2011, 03:43 PM
#570
Scooby Regular
iTrader: (20)
Join Date: Jul 2008
Location: n/a
Posts: 5,304
Likes: 0
Received 0 Likes
on
0 Posts
apr performance rear number plate recess filler for import plate as above
apr performance 2002 bugeye front bumper canards
apr performance front aero dynamic lip (the one that goes under the car like a skid plate)
apr performance f1 style racing mirrors as on duncans time attack car.
any of the above, all are expensive and very hard to get hold of, so we need them here in UK!
apr performance 2002 bugeye front bumper canards
apr performance front aero dynamic lip (the one that goes under the car like a skid plate)
apr performance f1 style racing mirrors as on duncans time attack car.
any of the above, all are expensive and very hard to get hold of, so we need them here in UK!