Carbon Fibre Vinyl
#271
Scooby Regular
iTrader: (1)
Join Date: Jun 2000
Location: Essex
Posts: 2,818
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
No it's three pieces, had a real hard time with it. Bought a 1200mm x 300mm piece, with the intention of cutting it into two pieces. 150mm x 1200mm is just about right. You need a total length of approx 2300mm.
Just couldn't get it to stay in the recess without bubbling, so just cut it again and fitted the top piece separately.
No it's three pieces, had a real hard time with it. Bought a 1200mm x 300mm piece, with the intention of cutting it into two pieces. 150mm x 1200mm is just about right. You need a total length of approx 2300mm.
Just couldn't get it to stay in the recess without bubbling, so just cut it again and fitted the top piece separately.
#272
Scooby Regular
iTrader: (3)
Join Date: Sep 2005
Location: Clacton,Essex
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
No it's three pieces, had a real hard time with it. Bought a 1200mm x 300mm piece, with the intention of cutting it into two pieces. 150mm x 1200mm is just about right. You need a total length of approx 2300mm.
Just couldn't get it to stay in the recess without bubbling, so just cut it again and fitted the top piece separately.
No it's three pieces, had a real hard time with it. Bought a 1200mm x 300mm piece, with the intention of cutting it into two pieces. 150mm x 1200mm is just about right. You need a total length of approx 2300mm.
Just couldn't get it to stay in the recess without bubbling, so just cut it again and fitted the top piece separately.
I fancy doing my splitter, but have way too many bolts that I've added, dont want to undo them all lol.
#273
Scooby Regular
iTrader: (40)
Join Date: Aug 2008
Location: Suffolk
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
bit off topic but u say to have added more bolts too your splitter. Is that near the wheel arch? My spotter is bolted using the suied fixings but it looks like it's not a good fit below the winglets and just under front fog light cover
#274
Scooby Regular
iTrader: (3)
Join Date: Sep 2005
Location: Clacton,Essex
Posts: 1,489
Likes: 0
Received 0 Likes
on
0 Posts
Reason being I noticed you could see some daylight/gapes, so adding bolts closed them up again. Its been like that for best part of a year now, and its 100%.
#275
Scooby Regular
iTrader: (40)
Join Date: Aug 2008
Location: Suffolk
Posts: 2,163
Likes: 0
Received 0 Likes
on
0 Posts
I have used extra bolts in both places where you have mentioned,the winglets being the worst, as you could hold it up where you wanted, so a bolt was added=sorted, and also in the middle of the splitter.
Reason being I noticed you could see some daylight/gapes, so adding bolts closed them up again. Its been like that for best part of a year now, and its 100%.
Reason being I noticed you could see some daylight/gapes, so adding bolts closed them up again. Its been like that for best part of a year now, and its 100%.
#291
Had some bits done on the rally car ..... roof, rear spoiler, bonnet scoop, and cills..
Thanks to KIERAN at RGVA in Maidstone.
Not to everyones taste, but it is a competition car...and it will get noticed.!
jon
Thanks to KIERAN at RGVA in Maidstone.
Not to everyones taste, but it is a competition car...and it will get noticed.!
jon
#294
Stickerman!
iTrader: (2)
Join Date: Aug 2005
Location: Jarrow
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Managed to get some delivered yesterday, havent got my scooby anymore so did a bit of work on the vectra instead as its easier to take parts out of then it is on the rx7
Old on the left, new on the right
gearbox surround, ashtray and lighter socket
and both together
Lovely lookin stuff!
Started a nice little wrapping business to coincide with the vinyl business I have anyway, had a lot of interest in the north east already, alot of peeps on TTS coming for bits done in the next couple of weeks
Old on the left, new on the right
gearbox surround, ashtray and lighter socket
and both together
Lovely lookin stuff!
Started a nice little wrapping business to coincide with the vinyl business I have anyway, had a lot of interest in the north east already, alot of peeps on TTS coming for bits done in the next couple of weeks
#295
Scooby Regular
Join Date: Jun 2002
Location: Ayrshire
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Spent the afternoon doing my 2002 STi panels. Brilliant stuff although tricky to get to form into tight corners. Looks superb fitted, I'll take some completed photos tomorrow.
Last edited by Andy Murdoch; 06 March 2010 at 09:53 PM.