Thanks

No it's three pieces, had a real hard time with it. Bought a 1200mm x 300mm piece, with the intention of cutting it into two pieces. 150mm x 1200mm is just about right. You need a total length of approx 2300mm.
Just couldn't get it to stay in the recess without bubbling, so just cut it again and fitted the top piece separately.

 

I see, still looks really good. Thats one good thing I found with the carbon lines, in that you can line them up if you had to do it in parts.

I fancy doing my splitter, but have way too many bolts that I've added, dont want to undo them all lol.

 

bit off topic but u say to have added more bolts too your splitter. Is that near the wheel arch? My spotter is bolted using the suied fixings but it looks like it's not a good fit below the winglets and just under front fog light cover

 

I have used extra bolts in both places where you have mentioned,the winglets being the worst, as you could hold it up where you wanted, so a bolt was added=sorted, and also in the middle of the splitter.
Reason being I noticed you could see some daylight/gapes, so adding bolts closed them up again. Its been like that for best part of a year now, and its 100%.

 

Excelent darren cheers for that, not just mine then, I can see daylight at min too, was thinking of adding extra bolts Saturday as I can hold it in place and looks like urs, did u just get some nuts and bolts from b&q or something

 

No probs mate, glade to help.
Yeah just some standard nuts&bolts from B&Q, similar size to what was supplied with the splitter 6mm maybe?, just fit them where you can.

 

Great cheers, will get that sorted asap. Are you coming to the scoobycity rolling road day? Really good day out, be good to see ur car in the flesh

 

Let us know when you get the splitter sorted want you!.
When is the RR?, and where?

 

Mines going in for the p1 Splitter and 22b vents done in Carbon Wrap on sat,

ill get some pics up sat

 

RR when and where

darc

 

Where abouts you getting it done mate

 

the company on here mate

Vinyl matters

darc

 

Darc if your going to him, mind out when you enter the side road to the lock up, as i use to catch my classic all the time

 

Ok mate thanks for the heads up ill be carefull

Cheers

Darc

 

Good stuff mate

 

Right, last night i got cracking with my splitter, carbon wrap FTW!!


All my tools


Lay it out


Cut to size


Halfway!


Job done






STi sticker for 'scene' points

 

Top job mate

How much did the vinyl set you back?

 

I bought a shedload to get it done but i think it was £100 for that piece

 

if any1's interested I am selling the 3M vinyl for £50 per 100 x 122cm

have 30M on a roll so can supply number of metres in single sheet x 122cm wide.

£8.95 P&P



looks like i could use a few of you at my place doing wrapping lol

 

Good to see these dining room tables being put to good use

Nice job, what make of splitter is that ? it's different to mine, or is that a WRX one.

 

Had some bits done on the rally car ..... roof, rear spoiler, bonnet scoop, and cills..

Thanks to KIERAN at RGVA in Maidstone.







Not to everyones taste, but it is a competition car...and it will get noticed.!

jon

 

WOW!!!!! Mean as ****

 

like it

 

Managed to get some delivered yesterday, havent got my scooby anymore so did a bit of work on the vectra instead as its easier to take parts out of then it is on the rx7

Old on the left, new on the right



gearbox surround, ashtray and lighter socket



and both together



Lovely lookin stuff!

Started a nice little wrapping business to coincide with the vinyl business I have anyway, had a lot of interest in the north east already, alot of peeps on TTS coming for bits done in the next couple of weeks

 

Spent the afternoon doing my 2002 STi panels. Brilliant stuff although tricky to get to form into tight corners. Looks superb fitted, I'll take some completed photos tomorrow.

 

looks good Andy, tight corners was the part I was having probems with.

 

Looks really good, just ordered some to do round my heater ash tray etc, I'll post some pics when it's done.
Paul

 

These guys at Vinyl matterS do a great job as you can prob see from the pictures im well happy with it

top lads

cheers

darc

 

Spot on mate. Ant and the crew are good

 

Nice one Darc