08/09 Hatches, Stand up and show yourselves!!!
Scooby Regular
iTrader: (5)
So, thought this problem ( hot air from 1 vent, cold from ALL others! ) was nearly sorted after extensive cooling system bleeding / burping, and radiator cap change. No water lost since, and seemed to be warmer and from more vents.
Until this weekend ... was warm ( albeit on full hot temp setting ), but on idling vents all went cold!
So finally removed oil/water separator / catch can to access hoses into heater matrix ... removed both and no dripping .. ( guess the engine bay end of these heater core hoses are above all the heater core? Or core was blocked / air locked??) . Flushed through, and got a lot of orange water ( rust? ) out, ran until it became clean water out. Boxed it all up again and checked water reservoir, was fine.
Ran engine on idle, once warmed up the heater seemed to be working normally again! Few miles run, no leaks and heater seemed to be working fine!!
Didn't change thermostat ( I had bought a new one ) nor drain / flush main cooling system / radiator, likely do that later, nor use new antifreeze etc. but seems like it was a silly problem of air lock or blockage in heater core.
Let's see how it goes for a few days.
Proper coolant change will be done shortly!!
V
Until this weekend ... was warm ( albeit on full hot temp setting ), but on idling vents all went cold!
So finally removed oil/water separator / catch can to access hoses into heater matrix ... removed both and no dripping .. ( guess the engine bay end of these heater core hoses are above all the heater core? Or core was blocked / air locked??) . Flushed through, and got a lot of orange water ( rust? ) out, ran until it became clean water out. Boxed it all up again and checked water reservoir, was fine.
Ran engine on idle, once warmed up the heater seemed to be working normally again! Few miles run, no leaks and heater seemed to be working fine!!
Didn't change thermostat ( I had bought a new one ) nor drain / flush main cooling system / radiator, likely do that later, nor use new antifreeze etc. but seems like it was a silly problem of air lock or blockage in heater core.
Let's see how it goes for a few days.
Proper coolant change will be done shortly!!
V
Do a full coolant change & flush and see how it goes, Last time i saw this the liners had cracked
Cheers Rob, Matt-C,
Thermostat has been mentioned, so I bought a genuine Subaru one ( current one is a lower temp opening one ) and some proper OAT anti freeze.
I was trying the quicker easier jobs first. Flush and thermostat next just need to sort ramps to get under and drop the undertray!
Any suggestions for best way to flush the whole coolant system, not just drain the radiator?
Rob - hope not!!! Block was new and has bore inserts care of ASP, about 50k miles ago, cossie head gaskets I think, head studs, RCM oil pan anti surge plate, etc.!!
Thermostat has been mentioned, so I bought a genuine Subaru one ( current one is a lower temp opening one ) and some proper OAT anti freeze.
I was trying the quicker easier jobs first. Flush and thermostat next just need to sort ramps to get under and drop the undertray!
Any suggestions for best way to flush the whole coolant system, not just drain the radiator?
Rob - hope not!!! Block was new and has bore inserts care of ASP, about 50k miles ago, cossie head gaskets I think, head studs, RCM oil pan anti surge plate, etc.!!
Scooby Regular
Has anyone changed any of their bulbs on their Sti hatch to LED ones, as an example one of my reg plate light bulbs needs replacing, whilst it needs replacing i may start putting LED bulbs in. I came across this link on google, ive not used them before so have no idea if they are any good or not, if anyone else has any links to LED or uprated bulbs websites feel free to post them
https://www.ledperf.co.uk/leds-subar...5_480_609.html
https://www.ledperf.co.uk/leds-subar...5_480_609.html
Scooby Regular
iTrader: (6)
i used these in my number plate builbs just end of last year https://www.ringautomotive.com/en/product/RW5014LED
for the sidelights i put a set of Halfords LED in about 6yrs ago and still working 100%
for the sidelights i put a set of Halfords LED in about 6yrs ago and still working 100%
Last edited by Gambit; 03 April 2024 at 12:44 PM.
Scooby Regular
i used these in my number plate builbs just end of last year https://www.ringautomotive.com/en/product/RW5014LED
for the sidelights i put a set of Halfords LED in about 6yrs ago and still working 100%
for the sidelights i put a set of Halfords LED in about 6yrs ago and still working 100%
Scooby Regular
iTrader: (6)
Thanks Gambit, do yours flicker ? One of the reviews on the amazon link below said theirs flicker.
https://www.amazon.co.uk/Ring-Automo...s%2C108&sr=8-1
https://www.amazon.co.uk/Ring-Automo...s%2C108&sr=8-1
They dont. i went through a couple of cheap chinese (amazon/ebay) sets on the sidelights that did flicker before i just bought the Halfords ones and they've never flickered (lifetime warranty also on them at the time). Nor do the Ring ones. id advise buying branded rather than cheap chinese knock offs
also your car doesnt have any funky CMOS
Last edited by Gambit; 03 April 2024 at 01:45 PM.
Scooby Regular
and run them as DRL's.
They were brighter than the OEM side lights, so had to upgrade them to LEDs as well.
along with all cabin interior lights.
Even the rears are now all LED (2017)
The following 2 users liked this post by Don Clark:
Scooby Regular
Scooby Regular
iTrader: (6)
anyone had any luck fitting aftermarket power steering pumps, or managed to find somewhere that reconditions them?
my pump is knackered making all sorts of noises when cold (its not the top O-ring ive tried that & the rest already) so now looking at replacement pumps - ideally wanted genuine but guts of £500 (£900 from dealer!) has me looking at other aftermarket suppliers - but questioning the quality of them
my pump is knackered making all sorts of noises when cold (its not the top O-ring ive tried that & the rest already) so now looking at replacement pumps - ideally wanted genuine but guts of £500 (£900 from dealer!) has me looking at other aftermarket suppliers - but questioning the quality of them
Scooby Regular
anyone had any luck fitting aftermarket power steering pumps, or managed to find somewhere that reconditions them?
my pump is knackered making all sorts of noises when cold (its not the top O-ring ive tried that & the rest already) so now looking at replacement pumps - ideally wanted genuine but guts of £500 (£900 from dealer!) has me looking at other aftermarket suppliers - but questioning the quality of them
my pump is knackered making all sorts of noises when cold (its not the top O-ring ive tried that & the rest already) so now looking at replacement pumps - ideally wanted genuine but guts of £500 (£900 from dealer!) has me looking at other aftermarket suppliers - but questioning the quality of them
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Member's Gallery
16
12 September 2016 09:05 PM
09, 10, body, chip, filling, gtvario, impreza, kit, my08, paint, revalve, scoobynet, st20330zr010, st20330zr020, st20502zr000, st960204s290, steering, sti, subaru