08/09 Hatches, Stand up and show yourselves!!!
Scooby Regular
330s exhaust
I’ve got the uprated pro- drive quad exit rear box If anyone’s interested......this is the upgraded 3.5” tip exhaust that came on the 330s cars.
better sound and larger tips than the small standard
ones....
Its just come off my car.
let me know.
better sound and larger tips than the small standard
ones....
Its just come off my car.
let me know.
Yep!
6th gear, about 60 - 70 but LOTS of 50 mph limits for smart motorway building ... over a 260 mile run, but as soon as back to normal motorway driving ( or even a hill ) or worse town driving, drops very rapidly ....
A remap on my std 330s took it to 360, then sports cat and remap to 374 bhp.
Common? wisdom on thes 2.5's was to keep it under 400, probably 370 ish until forged.
Mine did blow head gaskets and ringland failure after 3 1/4 years and 35000 miles !!!
Scooby Regular
iTrader: (4)
Interesting stuff, definitely looking for safe numbers but it would seem that I can get quite a lot more from my 330 once the rebuild is completed, without needing to swap out the turbo straight away.
Scooby Regular
I also had 400bhp from a billet vf48 , just pump fuel
Scooby Regular
iTrader: (11)
Is there a lowering seat bracket for the driver's side Recaro seat?
Also is the leather real or faux leather?
The driver's side bolster has seen better days and if I get it repaired I may as well replace that leather section.
Edit: I've found this: https://www.japanparts.com/parts/detail/20602
Also is the leather real or faux leather?
The driver's side bolster has seen better days and if I get it repaired I may as well replace that leather section.
Edit: I've found this: https://www.japanparts.com/parts/detail/20602
Last edited by fpan; 16 April 2019 at 04:27 PM.
Scooby Regular
iTrader: (5)
Is there a lowering seat bracket for the driver's side Recaro seat?
Also is the leather real or faux leather?
The driver's side bolster has seen better days and if I get it repaired I may as well replace that leather section.
Edit: I've found this: https://www.japanparts.com/parts/detail/20602
Also is the leather real or faux leather?
The driver's side bolster has seen better days and if I get it repaired I may as well replace that leather section.
Edit: I've found this: https://www.japanparts.com/parts/detail/20602
Scooby Regular
iTrader: (78)
Items recently viewed is done by internet tracking cookies, so you wouldn't know this, so they must be items looked at last on that website (related website) on your machine. So I hand it to you that it was you looking at STI rear supports and Spec C shocks
Scooby Regular
iTrader: (11)
Btw, I have a creak from the driver's Recaro seat when cornering that is annoying, has anyone else experienced this and how have you solved it?
Scooby Regular
iTrader: (5)
Fair cop. Guilty of extensive Japanparts browsing. Damn knowledgeable computer techs
Scooby Regular
iTrader: (5)
Scooby Regular
iTrader: (11)
Scooby Regular
Scooby Regular
results!
Closed deck with standard 2.5” 330s decat exhaust, standard headers, rcm precision turbo....made
478.9 bhp and 445 for lbs.......(aquamist methanol injection)
Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)
478.9 bhp and 445 for lbs.......(aquamist methanol injection)
Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)
Last edited by Adw330s; 18 April 2019 at 01:09 AM.
Scooby Regular
Closed deck with standard 2.5” 330s decat exhaust, standard headers, rcm precision turbo....made
478.9 bhp and 445 for lbs.......(aquamist methanol injection)
Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)
478.9 bhp and 445 for lbs.......(aquamist methanol injection)
Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)
Scooby Regular
iTrader: (6)
Closed deck with standard 2.5” 330s decat exhaust, standard headers, rcm precision turbo....made
478.9 bhp and 445 for lbs.......(aquamist methanol injection)
Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)
478.9 bhp and 445 for lbs.......(aquamist methanol injection)
Same setup......had some work done.......3” full
exhaust, rcm unequal headers, Harvey up-pipe, 4 bar Map sensor.....Bob Rawle remap......made 525bhp and 568 ft lbs........pulls like hell (AND STILL ON STANDARD TMIC!!)
im targeting about 420bhp on mine with a GT3071r / full 3" / ETS FMIC / ID 1050cc injectors etc but what your getting makes mine sound like i spent way too much money to achieve 400-420bhp! final piece of jigsaw is still to get injectors fitted tho
Scooby Regular
iTrader: (1)
Scooby Regular
iTrader: (11)
It comes from the front left of the driver's seat.
I've ordered a Kansai lowering seat bracket, hopefully that will solve it (if the seat bracket you refer to is the same item I am going to replace).
Scooby Regular
iTrader: (7)
Scooby Regular
iTrader: (11)
Scooby Regular
got any graphs for both them?
im targeting about 420bhp on mine with a GT3071r / full 3" / ETS FMIC / ID 1050cc injectors etc but what your getting makes mine sound like i spent way too much money to achieve 400-420bhp! final piece of jigsaw is still to get injectors fitted tho
im targeting about 420bhp on mine with a GT3071r / full 3" / ETS FMIC / ID 1050cc injectors etc but what your getting makes mine sound like i spent way too much money to achieve 400-420bhp! final piece of jigsaw is still to get injectors fitted tho
Yeah got both graphs mate. PM me you’re email and I’ll send across. No matter how many times I try to upload on here it just will not work for me!
Scooby Regular
iTrader: (11)
Scooby Regular