08/09 Hatches, Stand up and show yourselves!!!
14 December 2009, 01:10 PM
#1441
Scooby Regular
Join Date: Oct 2003
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
14 December 2009, 04:05 PM
#1442
Scooby Regular
iTrader: (2)
Join Date: Feb 2007
Location: England
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Hi all,
Looking around for a 330s (knowing me it'll take me ages to find the right one!). Took one for a test drive Saturday and liked it a lot.
Was just wondering how much the Prodrive flaps were for the hatch - can't seem to find them on the Subaru website.
BTW - this thread is why I want a hatch, you rotten buggers!!
Looking around for a 330s (knowing me it'll take me ages to find the right one!). Took one for a test drive Saturday and liked it a lot.
Was just wondering how much the Prodrive flaps were for the hatch - can't seem to find them on the Subaru website.
BTW - this thread is why I want a hatch, you rotten buggers!!
14 December 2009, 07:08 PM
#1446
Mine has braided goodridge lines and 5.1 fluid in at the moment, does make a better feel to the brake pedal and doesnt fade, these brakes are nearly worn out now, so gonna stick with the brembo calliper and fit a set of performance friction strap drive disc's and pads
15 December 2009, 09:21 AM
#1448
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
Here you go bud, about half way down:
Subaru Accessories
Actually £30 a pair so pretty good value and subtle.
Personally I went for the Rally Armors, as they offer superior protection.
Thanks
Arron
Subaru Accessories
Actually £30 a pair so pretty good value and subtle.
Personally I went for the Rally Armors, as they offer superior protection.
Thanks
Arron
15 December 2009, 09:53 AM
#1449
Scooby Regular
Join Date: May 2009
Location: Berkshire
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
I tried haggling
Still he did me a deal of £1600 including fitting (which is what it quotes on the Prodrive site (but not sure of this includes fitting).
W
15 December 2009, 12:38 PM
#1450
Scooby Regular
Join Date: May 2009
Location: Tyne & Wear
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
I reminded my dealer that he did not tell me about thew 1/2 price deal for PPP that was running 2 months after I bought my car. Being a dealer he was not embarrassed by this
Still he did me a deal of £1600 including fitting (which is what it quotes on the Prodrive site (but not sure of this includes fitting).
W
Still he did me a deal of £1600 including fitting (which is what it quotes on the Prodrive site (but not sure of this includes fitting).
W
15 December 2009, 01:16 PM
#1451
Scooby Regular
Join Date: May 2009
Location: Tyne & Wear
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Im starting to fit whiteline chassis mods, like i know alot of you already have . Going for Tein springs as well. Ive been advise that fitting the bump steer kit is a good idea. But at nearly two hundred fitted its pushing me beyond what i had budgeted for. I was wondering if any body else has got it done ? Also if it is worth it ? 
Thanks
John
Thanks
John
15 December 2009, 01:20 PM
#1452
i think its such a con £1600 for an exchanged, reprogrammed ECU and cat back exhaust just because you get the warranty untouched from Subaru.
I only got it as it was 1/2 price when i ordered my hatch, otherwise the same money would have gone to forged pistons and a much higher spec'd ECU / exhaust system without cats.
I only got it as it was 1/2 price when i ordered my hatch, otherwise the same money would have gone to forged pistons and a much higher spec'd ECU / exhaust system without cats.
15 December 2009, 01:33 PM
#1453
Scooby Regular
Join Date: Sep 2003
Location: At the diesel pump...
Posts: 8,677
Likes: 0
Received 0 Likes
on
0 Posts
Whats this prodrive website you talk about. I'd love to have a look see and see if they have anything for my car (and a usefull resource I think).
15 December 2009, 02:52 PM
#1454
Scooby Regular
Join Date: May 2009
Location: Tyne & Wear
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
15 December 2009, 04:03 PM
#1455
prodrive.com
its not that hard lol
warning!!! do not visit the site with your credit card close by lol
they have a nice pic of our RB320's here: http://www.prodrive.com/b_events.html
and they still have 30% on many parts, including my favourite set of wheels: http://www.prodrive.com/products_level2.html?id=31&p=12
its not that hard lol
warning!!! do not visit the site with your credit card close by lol
they have a nice pic of our RB320's here: http://www.prodrive.com/b_events.html
and they still have 30% on many parts, including my favourite set of wheels: http://www.prodrive.com/products_level2.html?id=31&p=12
Last edited by rb5 286; 15 December 2009 at 04:07 PM.
15 December 2009, 04:17 PM
#1456
Scooby Regular
iTrader: (4)
Join Date: Jun 2007
Location: the 'shire
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Here you go bud, about half way down:
Subaru Accessories
Actually £30 a pair so pretty good value and subtle.
Personally I went for the Rally Armors, as they offer superior protection.
Thanks
Arron
Subaru Accessories
Actually £30 a pair so pretty good value and subtle.
Personally I went for the Rally Armors, as they offer superior protection.
Thanks
Arron
15 December 2009, 07:32 PM
#1458
Scooby Regular
iTrader: (2)
Join Date: Feb 2007
Location: England
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys - I've got some more questions I'm hoping you can answer.Going to look at another 330s on Saturday and in the process of trying to sort a deal - subject to viewing and test drive.
What lowering springs had people got and recommend?
Does anyone have the Milltek cat-back exhaust and how much did it cost (please PM me if you'd rather not divulge the cost on here!)
Forgot to ask the dealer this but would a 2009 car still need the ecu re-flash and are there still problems?
Should the car come standard with floor mats (330s branded or otherwise)
What front splitter have you put on yours?
I have been through the thread but can't remember the answers to these!!
Many thanks
What lowering springs had people got and recommend?
Does anyone have the Milltek cat-back exhaust and how much did it cost (please PM me if you'd rather not divulge the cost on here!)
Forgot to ask the dealer this but would a 2009 car still need the ecu re-flash and are there still problems?
Should the car come standard with floor mats (330s branded or otherwise)
What front splitter have you put on yours?
I have been through the thread but can't remember the answers to these!!
Many thanks
Last edited by renny; 15 December 2009 at 07:36 PM.
16 December 2009, 08:33 AM
#1459
Scooby Regular
Join Date: May 2009
Location: Berkshire
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Agree ---sort of
That said, the Litch Handling kit, Rota Torques and soon to be Friction Performance discs, pads and braided hoses will be non-dealer approved.
Cheers all re brake upgrades - off to spec some PFs and discs. Presume Litch do them?
W
16 December 2009, 04:39 PM
#1461
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Should be getting mine back end of this weekend/weekend. Pre owned, but has a few nice extras that make it very attractive from a drivers point of view. So goodbye M3, hello scoobs again for the day to day work!
16 December 2009, 07:19 PM
#1462
Scooby Regular
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
L-SCHLEGS 08 STI - Rotated 35r/Prodrive GC-010G/Seibon CW Hood + MOAR! - IWSTI.com: Subaru WRX STI Forums
Hate to think of how much he'd spent
16 December 2009, 07:42 PM
#1463
Scooby Regular
iTrader: (4)
Join Date: Jun 2007
Location: the 'shire
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Logan's allegedly taking a break from modifying his car!
Some cracking pics on his Flickr - Logan's 2008 STI - a set on Flickr
Some cracking pics on his Flickr - Logan's 2008 STI - a set on Flickr
17 December 2009, 01:12 PM
#1467
Scooby Regular
Join Date: Oct 2003
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Have answered your questions below, if you want no bother at all with your warranty suggest you stay with the Prodrive Performance Pack, fit Prodrive lowering springs and get the geo/4 wheel alignement done by a specialist. If you have a friendly dealer/use your common sense and are happy to change some stuff over if something goes wrong please read on
What lowering springs had people got and recommend?
The Tein lowering springs were very good before I went over to full AST suspension setup. Not used the Prodrive ones (which are made by Eibach) so can't comment on them. Make sure you get the geo/4 wheel alignment done by someone who knows what they are doing, some dealers are ok, but my cars settings were all over the place when I bought it, this makes a huge difference. There are a few discussions earlier in this thread about other worthwhile handling modifications
Does anyone have the Milltek cat-back exhaust and how much did it cost (please PM me if you'd rather not divulge the cost on here!)
Yes I have one. Suggest if you are thinking about going this way you stretch your budget now and get the full turbo back Milltek system (with de-cat and/or sports cat). Cost was list price from Ian at Litchfields but got a good deal on the fitting...sounds great (not too loud day to day) and gives the flow rates you need to get decent bhp/torque. You should also fit a high flow panel air filter (think the 330S already has one fitted) in the standard airbox or consider a Forge or AEM cold air induction kit (filter inside the wing/out of the engine bay model) while you are at it
Forgot to ask the dealer this but would a 2009 car still need the ecu re-flash and are there still problems?
Had to have an engine replaced under warranty (UK STI not 330S) because of the previous dodgy factory ecu map from Japan so know a bit about this. Heard the updated map sorts out the problems (they are explained in detail on this thread and other forums). The 330S ecu is swapped over when the cars enter the UK from Japan so it should be ok (they exchange your original ecu with one that has been re-mapped by Prodrive).
But if you are getting the full Milltek system you would be best of having an EcuTek re-map done by a decent mapper (Litchfields, Richard Bulmer, Simon from Jolly Green Monster & Andy Forrest all good as are others). A bespoke re-map is always better than the generic Prodrive map. Since I had mine EcuTek'd have not had any problems (touch wood)
Should the car come standard with floor mats (330s branded or otherwise)
No - but bargain hard with the dealer mate and it will
What front splitter have you put on yours?
Original STI one from Subaru, not cheap but looks good and is hard wearing (mine has taken loads of abuse over the last year and is still ok)
I have been through the thread but can't remember the answers to these!!
Many thanks
What lowering springs had people got and recommend?
The Tein lowering springs were very good before I went over to full AST suspension setup. Not used the Prodrive ones (which are made by Eibach) so can't comment on them. Make sure you get the geo/4 wheel alignment done by someone who knows what they are doing, some dealers are ok, but my cars settings were all over the place when I bought it, this makes a huge difference. There are a few discussions earlier in this thread about other worthwhile handling modifications
Does anyone have the Milltek cat-back exhaust and how much did it cost (please PM me if you'd rather not divulge the cost on here!)
Yes I have one. Suggest if you are thinking about going this way you stretch your budget now and get the full turbo back Milltek system (with de-cat and/or sports cat). Cost was list price from Ian at Litchfields but got a good deal on the fitting...sounds great (not too loud day to day) and gives the flow rates you need to get decent bhp/torque. You should also fit a high flow panel air filter (think the 330S already has one fitted) in the standard airbox or consider a Forge or AEM cold air induction kit (filter inside the wing/out of the engine bay model) while you are at it
Forgot to ask the dealer this but would a 2009 car still need the ecu re-flash and are there still problems?
Had to have an engine replaced under warranty (UK STI not 330S) because of the previous dodgy factory ecu map from Japan so know a bit about this. Heard the updated map sorts out the problems (they are explained in detail on this thread and other forums). The 330S ecu is swapped over when the cars enter the UK from Japan so it should be ok (they exchange your original ecu with one that has been re-mapped by Prodrive).
But if you are getting the full Milltek system you would be best of having an EcuTek re-map done by a decent mapper (Litchfields, Richard Bulmer, Simon from Jolly Green Monster & Andy Forrest all good as are others). A bespoke re-map is always better than the generic Prodrive map. Since I had mine EcuTek'd have not had any problems (touch wood)
Should the car come standard with floor mats (330s branded or otherwise)
No - but bargain hard with the dealer mate and it will
What front splitter have you put on yours?
Original STI one from Subaru, not cheap but looks good and is hard wearing (mine has taken loads of abuse over the last year and is still ok)
I have been through the thread but can't remember the answers to these!!
Many thanks
Last edited by Dave_P; 17 December 2009 at 01:17 PM.
17 December 2009, 02:27 PM
#1468
Scooby Regular
iTrader: (2)
Join Date: Feb 2007
Location: England
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Dave - appreciated.
Going to see a 330s on Saturday,have agreed a deal in principle subject to viewing.
Not sure I can justify the cost of the STI splitter - IIRC it's around £375. I've currently got a Scott Lowe V-Limited one on my Hawkeye which is very good. Tried accessing his website but it appears to be down?
Think the first mod I'll be doing is getting the fog light lense removed and fitting a clear one from Revolution - assume they are easy enough to swap.Haven't seen anywhere else that sells them at the moment though.
Will also take a trip to Litchfield at some point to have either the handling pack fitted (without the AST set-up) and have the Prodrive springs fitted or just get the standard pack - with the steering,rear ARB and wheel alignment but again with the Prodrive springs (have read on here he can get them?)
Have been offered the Milltek exhaust at 'cost price' (circa £580 - told it's £750 new?)
Not sure if this was turbo back or cat-back though.
Thanks again for the replies - this thread has been a wealth of info!
Going to see a 330s on Saturday,have agreed a deal in principle subject to viewing.
Not sure I can justify the cost of the STI splitter - IIRC it's around £375. I've currently got a Scott Lowe V-Limited one on my Hawkeye which is very good. Tried accessing his website but it appears to be down?
Think the first mod I'll be doing is getting the fog light lense removed and fitting a clear one from Revolution - assume they are easy enough to swap.Haven't seen anywhere else that sells them at the moment though.
Will also take a trip to Litchfield at some point to have either the handling pack fitted (without the AST set-up) and have the Prodrive springs fitted or just get the standard pack - with the steering,rear ARB and wheel alignment but again with the Prodrive springs (have read on here he can get them?)
Have been offered the Milltek exhaust at 'cost price' (circa £580 - told it's £750 new?)
Not sure if this was turbo back or cat-back though.
Thanks again for the replies - this thread has been a wealth of info!
Last edited by renny; 17 December 2009 at 02:28 PM.
17 December 2009, 08:53 PM
#1469
Renny, Have a search on ebay for a lip spoiler they are roughly £130 with postage and they are the urathane flexi ones.
rear fog light is easy enough to remove 2 nuts on the edge of the tailgate, one is hidden under the rear plastic cowling pull the cowling down to gain access to the 3rd nut and it will just pull out
rear fog light is easy enough to remove 2 nuts on the edge of the tailgate, one is hidden under the rear plastic cowling pull the cowling down to gain access to the 3rd nut and it will just pull out
17 December 2009, 09:44 PM
#1470
Scooby Regular
Join Date: Mar 2001
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
May be worth contacting Iain Litchfield regarding the splitter, we bought a genuine STI splitter from him when we bought the car certainly wasn't the price the dealers are quoting
Have the handling kit fitted to ours without springs or AST's, feels a lot better on the road, well worth the money
Have the handling kit fitted to ours without springs or AST's, feels a lot better on the road, well worth the money
Last edited by Scooby Wagon; 17 December 2009 at 09:46 PM.