08/09 Hatches, Stand up and show yourselves!!!
#5194
Scooby Regular
iTrader: (1)
Just remember all hatch owners to get your name down for the big hatch meeting at NBO 9
https://www.scoobynet.com/northern-e...ml#post9957766
There. Is even a class in the arena just for us
https://www.scoobynet.com/northern-e...ml#post9957766
There. Is even a class in the arena just for us
#5195
Scooby Senior
funny that you mention CR, we passed by their thiss afternoon on the wy back from Wiltshire. looks like they have a satin white hatch in the show room..... i wasn't allowed to sttop look! lol
I'll give it a miss, that's as bad/expensive as me wanting to get to get some red rear light film from the US.. $40 + $30p&p!!! big
I'll give it a miss, that's as bad/expensive as me wanting to get to get some red rear light film from the US.. $40 + $30p&p!!! big
#5200
#5202
Scooby Senior
#5203
Scooby Regular
iTrader: (2)
i wrapped a mates WR1 roof at the weekend with the 3M vinyl, amazing stuff!!! fitted it myself with no heat, no stretching - took 3 hours to do as I tucked it under all the rubbers and roof runners, you cant see any edges so looks like a stock c/f roof!!!
the film was a bit of a bugger on the headlights as i did it myself, coulda done with a 3rd hand, 2 to pull and hold the corners and 1 to hold heat gun, the other to squeegee
the rears are easier, 2 sections, 1 being flat the only **** bit is where it curves from rear to side of car, just a bit of heat and manipulation with help of a mate.
the film was a bit of a bugger on the headlights as i did it myself, coulda done with a 3rd hand, 2 to pull and hold the corners and 1 to hold heat gun, the other to squeegee
the rears are easier, 2 sections, 1 being flat the only **** bit is where it curves from rear to side of car, just a bit of heat and manipulation with help of a mate.
#5204
#5208
Had 20k service today, been told by dealer that engine and gearbox need to come out to fix an oil leak.
Hadn't notice any oil on the drive or any loss when checking above what's normal. Booked in to get done in a couple of weeks as having to wait for a courtesy car.
Will maybe get them to run gauge cabling through bulkhead whilst engine is out.
Hadn't notice any oil on the drive or any loss when checking above what's normal. Booked in to get done in a couple of weeks as having to wait for a courtesy car.
Will maybe get them to run gauge cabling through bulkhead whilst engine is out.
#5209
Scooby Regular
iTrader: (1)
Join Date: Feb 2009
Location: Edinburgh
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
AEM CAIK for hatch STi - possible group buy
Hi Guys,
I'm trying to put together a group buy for AEM CAIK for hatch STi. If you're interested, please see hatch forum for details:
http://subaruhatch.forumotion.com/t4...ible-group-buy
Cheers, Neil
I'm trying to put together a group buy for AEM CAIK for hatch STi. If you're interested, please see hatch forum for details:
http://subaruhatch.forumotion.com/t4...ible-group-buy
Cheers, Neil
#5210
New Hatch Forum and Website on the Ebay
Cheap as Chips
http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT
Cheap as Chips
http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT
#5211
Scooby Regular
iTrader: (5)
Hi Guys,
I'm trying to put together a group buy for AEM CAIK for hatch STi. If you're interested, please see hatch forum for details:
http://subaruhatch.forumotion.com/t4...ible-group-buy
Cheers, Neil
I'm trying to put together a group buy for AEM CAIK for hatch STi. If you're interested, please see hatch forum for details:
http://subaruhatch.forumotion.com/t4...ible-group-buy
Cheers, Neil
#5213
Scooby Senior
where you off to?
I'm getting ready now to go to the TOTAL IMPREZA photo shoot with my car how excited am I!!
I'm getting ready now to go to the TOTAL IMPREZA photo shoot with my car how excited am I!!
#5215
Scooby Regular
iTrader: (2)
Ok, some of you may have seen on the GR forum that I was getting some prototype fog covers made up using the OE fog blanks that come on the car
My mates done a stirling job and as you can see, kept all the fixing mounts in tact
and here it is fitted in place
As you can see, they fit fine with the foglight in place.
I'm going to try and see if Darren at ABW can mould these and get a cost per pair if any1 is interested?
My mates done a stirling job and as you can see, kept all the fixing mounts in tact
and here it is fitted in place
As you can see, they fit fine with the foglight in place.
I'm going to try and see if Darren at ABW can mould these and get a cost per pair if any1 is interested?
#5216
Scooby Regular
iTrader: (1)
Join Date: Mar 2005
Location: North West
Posts: 1,395
Likes: 0
Received 0 Likes
on
0 Posts
Mark
Been after some of these for a while. What your mate has done is almost there, maybe just needs a little bit more work to get the lines and levels bang on.
Does make a difference though.
I would defo be interested if the price is right.
Been after some of these for a while. What your mate has done is almost there, maybe just needs a little bit more work to get the lines and levels bang on.
Does make a difference though.
I would defo be interested if the price is right.
#5218
So those go OVER the fitted fog lights?
Would they fit over / instead of the OEM blanks if you don't have fog lights?
Saw some nice panels with air feed holes on ebay in cf/black, but 120.
Would they fit over / instead of the OEM blanks if you don't have fog lights?
Saw some nice panels with air feed holes on ebay in cf/black, but 120.