HT Autos rear Bumper Diffusers £129.00 Delivered!!!!
#187
Scooby Regular
iTrader: (45)
Join Date: May 2006
Location: Huntingdon Cambs
Posts: 3,989
Likes: 0
Received 0 Likes
on
0 Posts
Received mine this morning and all on the car now!
1st class service again!
Mark can you please leave me 2 sets of feedback...
1. This thread for the defuser
https://www.scoobynet.com/group-buys...delivered.html
2. The front splitter
https://www.scoobynet.com/group-buys...delivered.html
How to leave feedback if you get stuck!
https://www.scoobynet.com/news-annou...scoobynet.html
If none of that makes sense feel free to call me on 07742426285 and I will gladly talk you through it guys!
Cheers!
cossie-nutter
1st class service again!
Mark can you please leave me 2 sets of feedback...
1. This thread for the defuser
https://www.scoobynet.com/group-buys...delivered.html
2. The front splitter
https://www.scoobynet.com/group-buys...delivered.html
How to leave feedback if you get stuck!
https://www.scoobynet.com/news-annou...scoobynet.html
If none of that makes sense feel free to call me on 07742426285 and I will gladly talk you through it guys!
Cheers!
cossie-nutter
#188
Scooby Regular
iTrader: (13)
Join Date: Feb 2008
Location: Wes'ide (of London)
Posts: 1,978
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone done a fitting guide for these yet? Are you guys removing the rear bumper completely or just jacking up the rear and fitting it all in-situ? I'm tempted but soooo confused
#191
Scooby Regular
iTrader: (23)
Join Date: May 2006
Location: Rota Subzeros FOR sale!
Posts: 3,701
Likes: 0
Received 0 Likes
on
0 Posts
Out of interest, can you still access the rear tow hook? I've got a set of Nukabe tow hooks on my bug and I quite like showing them off lol
or is it fairly easy to cut and have access too?
Thanks
Ricey
or is it fairly easy to cut and have access too?
Thanks
Ricey
#193
Scooby Regular
Join Date: May 2005
Location: Avoiding tractors and OAP's!!!
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
1. mikey30...blobeye.... Carbon fibre
2. ruislip....blobeye
3. ali37 - blobeye-*PAID*
4. chrisdicko - blobeye
5. the bear1986...bugeye carbon paid
6. wrx,sti...blobeye
7. -Shane- Blobeye (carbon if it works ok)
8. red2.....blobeye
9. dunx - bugeye (carbon preferred !) - PAID - via Drew @ PM.
10. Scoober101 - Blobeye
11. wrx9181 - Blobeye - Carbon Fibre PAID
12. JDM Stig - Bugeye - Carbon plz
13. Wulsey - Bugeye
14. HT04 - Blobeye ( Carbon )
15. Hasting_s - Blobeye (Carbon) PAID
16. Bren - Blogeye (Carbon) [Ireland] PAID
17. Fat Boi Mike - Bugeye (Carbon) PAID
18. Deamon555 - Bugeye PAID
19. Scooby_Stu_ - Hawkeye PAID
20. Polomolo - Hawkeye (Carbon) *PAID*
21. raj_kemp - Blobeye PAID
22. psigeek - Bugeye - Carbon Effect *PAID*
23. kevin_sti - Blobeye - Carbon effect PAID
24. Petedotuk - blobeye - Carbon - Northern Ireland *PAID*
25. Moley_WRX - Classic *PAID*
26. LC Scooby - Bugeye Abs plastic - Payment sent
27. hightower1314-blobeye wr1- carbon effect- and a front splitter. PAID
28. F1 CJE UK hawkeye PAID
29. Billyokco classic carbon effect paid via paypal
30.ethanrob hawkeye
31. wiley - blobeye - carbon effect *PAID*
32. Wolfie - blobeye - carbon effect *PAID*
2. ruislip....blobeye
3. ali37 - blobeye-*PAID*
4. chrisdicko - blobeye
5. the bear1986...bugeye carbon paid
6. wrx,sti...blobeye
7. -Shane- Blobeye (carbon if it works ok)
8. red2.....blobeye
9. dunx - bugeye (carbon preferred !) - PAID - via Drew @ PM.
10. Scoober101 - Blobeye
11. wrx9181 - Blobeye - Carbon Fibre PAID
12. JDM Stig - Bugeye - Carbon plz
13. Wulsey - Bugeye
14. HT04 - Blobeye ( Carbon )
15. Hasting_s - Blobeye (Carbon) PAID
16. Bren - Blogeye (Carbon) [Ireland] PAID
17. Fat Boi Mike - Bugeye (Carbon) PAID
18. Deamon555 - Bugeye PAID
19. Scooby_Stu_ - Hawkeye PAID
20. Polomolo - Hawkeye (Carbon) *PAID*
21. raj_kemp - Blobeye PAID
22. psigeek - Bugeye - Carbon Effect *PAID*
23. kevin_sti - Blobeye - Carbon effect PAID
24. Petedotuk - blobeye - Carbon - Northern Ireland *PAID*
25. Moley_WRX - Classic *PAID*
26. LC Scooby - Bugeye Abs plastic - Payment sent
27. hightower1314-blobeye wr1- carbon effect- and a front splitter. PAID
28. F1 CJE UK hawkeye PAID
29. Billyokco classic carbon effect paid via paypal
30.ethanrob hawkeye
31. wiley - blobeye - carbon effect *PAID*
32. Wolfie - blobeye - carbon effect *PAID*
#194
Yes you do need to drills but you don't need to remove the exhaust. The only thing I removed was the tow eye as I fitted mine under the bumper and it fouled on the diffuser. My cars is lowered -35mm and I fitted it without even jackin the car up.
#195
Scooby Regular
Join Date: May 2005
Location: Avoiding tractors and OAP's!!!
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Fitted mine today . Just to let folks know, you can fit these without removing the bumper and one your own. All I did was put the back end on axle stands.
I went for the 'under the bumper look' as I prefer the look this way. Took about 4 hrs in total. I highly recommend using a Dremel multi-tool to cut the bumper. I also decided to cut a hole for the tow hook. I painted the bolt heads with a touch-up pen.
Some piccys
Thanks Mark and HT Autos . Now get cracking on the roof vortex generator .
I went for the 'under the bumper look' as I prefer the look this way. Took about 4 hrs in total. I highly recommend using a Dremel multi-tool to cut the bumper. I also decided to cut a hole for the tow hook. I painted the bolt heads with a touch-up pen.
Some piccys
Thanks Mark and HT Autos . Now get cracking on the roof vortex generator .
#196
Scooby Regular
iTrader: (13)
Join Date: Feb 2008
Location: Wes'ide (of London)
Posts: 1,978
Likes: 0
Received 0 Likes
on
0 Posts
Pete...Wolfie...
Is it safe to assume that if I wanted to go for the 'under-the-bumper' look (I assume that is where the panels sit inside the rear bumper) then I'd have to cut the r/s panel at the bulge of the rear tow hook.....???
After considering the whole silver screw issue I've pre-ordered some black headed rivets as somebody posted up earlier.... would there be any reason for me to want to use screws over rivets (other than the ability to easily remove the panels later)? I'll be looking to fit a rear ARB and droplinks soon, do these get in the way?!?
Is it safe to assume that if I wanted to go for the 'under-the-bumper' look (I assume that is where the panels sit inside the rear bumper) then I'd have to cut the r/s panel at the bulge of the rear tow hook.....???
After considering the whole silver screw issue I've pre-ordered some black headed rivets as somebody posted up earlier.... would there be any reason for me to want to use screws over rivets (other than the ability to easily remove the panels later)? I'll be looking to fit a rear ARB and droplinks soon, do these get in the way?!?
Last edited by Luther; 18 May 2009 at 12:25 AM.
#197
Scooby Regular
Join Date: May 2005
Location: Avoiding tractors and OAP's!!!
Posts: 1,282
Likes: 0
Received 0 Likes
on
0 Posts
Pete...Wolfie...
Is it safe to assume that if I wanted to go for the 'under-the-bumper' look (I assume that is where the panels sit inside the rear bumper) then I'd have to cut the r/s panel at the bulge of the rear tow hook.....???
After considering the whole silver screw issue I've pre-ordered some black headed rivets as somebody posted up earlier.... would there be any reason for me to want to use screws over rivets (other than the ability to easily remove the panels later)? I'll be looking to fit a rear ARB and droplinks soon, do these get in the way?!?
Is it safe to assume that if I wanted to go for the 'under-the-bumper' look (I assume that is where the panels sit inside the rear bumper) then I'd have to cut the r/s panel at the bulge of the rear tow hook.....???
After considering the whole silver screw issue I've pre-ordered some black headed rivets as somebody posted up earlier.... would there be any reason for me to want to use screws over rivets (other than the ability to easily remove the panels later)? I'll be looking to fit a rear ARB and droplinks soon, do these get in the way?!?
As for the rear drop links and ARB it would be more difficult with the diffuser fitted so I'd probably get that done first or fit screws to the diffuser so that you could remove it. Once your happy with your back end mods () you could fit your black headed rivets.
Wolfie.
#198
Pete...Wolfie...
Is it safe to assume that if I wanted to go for the 'under-the-bumper' look (I assume that is where the panels sit inside the rear bumper) then I'd have to cut the r/s panel at the bulge of the rear tow hook.....???
After considering the whole silver screw issue I've pre-ordered some black headed rivets as somebody posted up earlier.... would there be any reason for me to want to use screws over rivets (other than the ability to easily remove the panels later)? I'll be looking to fit a rear ARB and droplinks soon, do these get in the way?!?
Is it safe to assume that if I wanted to go for the 'under-the-bumper' look (I assume that is where the panels sit inside the rear bumper) then I'd have to cut the r/s panel at the bulge of the rear tow hook.....???
After considering the whole silver screw issue I've pre-ordered some black headed rivets as somebody posted up earlier.... would there be any reason for me to want to use screws over rivets (other than the ability to easily remove the panels later)? I'll be looking to fit a rear ARB and droplinks soon, do these get in the way?!?
#205
Scooby Regular
iTrader: (23)
Join Date: May 2006
Location: Rota Subzeros FOR sale!
Posts: 3,701
Likes: 0
Received 0 Likes
on
0 Posts
Amazing service from HT autos!!!!
Ordered the diffuser and it arrived the next day :thumb
had a slight fitting problem and it was sorted out the next day!!!
Now thats a great way to have great customer service!!!!!
Thanks alot for the replacement, you have PM too.
Ricey
Ordered the diffuser and it arrived the next day :thumb
had a slight fitting problem and it was sorted out the next day!!!
Now thats a great way to have great customer service!!!!!
Thanks alot for the replacement, you have PM too.
Ricey
#206
Hi All,
I have 1 of these going spare if anyone wants it? Never unwrapped as I sold my Impreza before fitting.
It is for a MY05 Blob STI, and I believe it also fits MY03 and MY04.
PM me if interested. I'll do it for the same price as this thread sold it to me.
Cheers,
I have 1 of these going spare if anyone wants it? Never unwrapped as I sold my Impreza before fitting.
It is for a MY05 Blob STI, and I believe it also fits MY03 and MY04.
PM me if interested. I'll do it for the same price as this thread sold it to me.
Cheers,
#207
Anyone want it?
#209
Just to note that I am now back from a break away and still have a Black Plastic one of these available.
I'll have it delivered to you for £100. Still in the un-opened box it was sent to me in.
PM me
I'll have it delivered to you for £100. Still in the un-opened box it was sent to me in.
PM me
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM