So I take it then that this offer is still on ?

 

Is this offer still running ?

 

I paid £129 this morning as I said I was from Scoobynet!

Give Mark a call peeps as he's here to help!

 

anyone got pics of the carbon effect one on a classic?

 

Due to popularity

OFFER EXTENDED UNTIL END OF MAY!!!!

Cheers,
Mark @ HT Autos

 

Mark,

Could you please PM me a total cost for a plain Bugeye rear diffuser and the PU Bugeye WRX lip spoiler, and I will get it paid via Paypal.

Cheers

 

Received mine this morning and all on the car now!

1st class service again!

Mark can you please leave me 2 sets of feedback...

1. This thread for the defuser
https://www.scoobynet.com/group-buys...delivered.html

2. The front splitter
https://www.scoobynet.com/group-buys...delivered.html

How to leave feedback if you get stuck!
https://www.scoobynet.com/news-annou...scoobynet.html

If none of that makes sense feel free to call me on 07742426285 and I will gladly talk you through it guys!

Cheers!
cossie-nutter

 

Has anyone done a fitting guide for these yet? Are you guys removing the rear bumper completely or just jacking up the rear and fitting it all in-situ? I'm tempted but soooo confused

 

You can fit it without having to even jack the car up.

 

Really? I'm assuming that some holes will need to be drilled along the bumper.... and the exhaust removed?

 

Out of interest, can you still access the rear tow hook? I've got a set of Nukabe tow hooks on my bug and I quite like showing them off lol

or is it fairly easy to cut and have access too?

Thanks
Ricey

 

Just ordered mine

 

1. mikey30...blobeye.... Carbon fibre
2. ruislip....blobeye
3. ali37 - blobeye-*PAID*
4. chrisdicko - blobeye
5. the bear1986...bugeye carbon paid
6. wrx,sti...blobeye
7. -Shane- Blobeye (carbon if it works ok)
8. red2.....blobeye
9. dunx - bugeye (carbon preferred !) - PAID - via Drew @ PM.
10. Scoober101 - Blobeye
11. wrx9181 - Blobeye - Carbon Fibre PAID
12. JDM Stig - Bugeye - Carbon plz
13. Wulsey - Bugeye
14. HT04 - Blobeye ( Carbon )
15. Hasting_s - Blobeye (Carbon) PAID
16. Bren - Blogeye (Carbon) [Ireland] PAID
17. Fat Boi Mike - Bugeye (Carbon) PAID
18. Deamon555 - Bugeye PAID
19. Scooby_Stu_ - Hawkeye PAID
20. Polomolo - Hawkeye (Carbon) *PAID*
21. raj_kemp - Blobeye PAID
22. psigeek - Bugeye - Carbon Effect *PAID*
23. kevin_sti - Blobeye - Carbon effect PAID
24. Petedotuk - blobeye - Carbon - Northern Ireland *PAID*
25. Moley_WRX - Classic *PAID*
26. LC Scooby - Bugeye Abs plastic - Payment sent
27. hightower1314-blobeye wr1- carbon effect- and a front splitter. PAID
28. F1 CJE UK hawkeye PAID
29. Billyokco classic carbon effect paid via paypal
30.ethanrob hawkeye
31. wiley - blobeye - carbon effect *PAID*
32. Wolfie - blobeye - carbon effect *PAID*

 

Yes you do need to drills but you don't need to remove the exhaust. The only thing I removed was the tow eye as I fitted mine under the bumper and it fouled on the diffuser. My cars is lowered -35mm and I fitted it without even jackin the car up.

 

Fitted mine today . Just to let folks know, you can fit these without removing the bumper and one your own. All I did was put the back end on axle stands.

I went for the 'under the bumper look' as I prefer the look this way. Took about 4 hrs in total. I highly recommend using a Dremel multi-tool to cut the bumper. I also decided to cut a hole for the tow hook. I painted the bolt heads with a touch-up pen.

Some piccys







Thanks Mark and HT Autos . Now get cracking on the roof vortex generator .

 

Pete...Wolfie...

Is it safe to assume that if I wanted to go for the 'under-the-bumper' look (I assume that is where the panels sit inside the rear bumper) then I'd have to cut the r/s panel at the bulge of the rear tow hook.....???

After considering the whole silver screw issue I've pre-ordered some black headed rivets as somebody posted up earlier.... would there be any reason for me to want to use screws over rivets (other than the ability to easily remove the panels later)? I'll be looking to fit a rear ARB and droplinks soon, do these get in the way?!?

 

You don't need to cut for the tow hook but it does make it fit better.

As for the rear drop links and ARB it would be more difficult with the diffuser fitted so I'd probably get that done first or fit screws to the diffuser so that you could remove it. Once your happy with your back end mods () you could fit your black headed rivets.

Wolfie.

 

As wolfie says m8 you fit it without cutting space for the tow eye but it leaves a gastly bulge. I opted to remove the tow eye instead of cutting the diffuser.

 

same as above....
i cut the tow eye off and left the diffuser alone!!!
great job!!

 

PAYPAL funds sent! but I need the hole cut for the tow eye.

Ricey

 

Got mine this morning thanks mark, looks great, just need me car back from mot and ill get it fitted

 

Arrived Friday! Thanks alot!

Still to open the box, tho lol

Ricey

 

Last Orders Please

OFFER ENDS THIS FRIDAY !!!! ( 2pm )

 

A quick pic of mine fitted i went for the under the bumper look ,used the subaru bumper fixings.

 

Amazing service from HT autos!!!!

Ordered the diffuser and it arrived the next day :thumb

had a slight fitting problem and it was sorted out the next day!!!

Now thats a great way to have great customer service!!!!!
Thanks alot for the replacement, you have PM too.

Ricey

 

Hi All,

I have 1 of these going spare if anyone wants it? Never unwrapped as I sold my Impreza before fitting.

It is for a MY05 Blob STI, and I believe it also fits MY03 and MY04.

PM me if interested. I'll do it for the same price as this thread sold it to me.

Cheers,

 

Anyone want it?

 

pm sent

 

Just to note that I am now back from a break away and still have a Black Plastic one of these available.

I'll have it delivered to you for £100. Still in the un-opened box it was sent to me in.

PM me