building my 97 impreza into a 2.5 race machine
Thread Starter
Scooby Senior
iTrader: (12)
Joined: Apr 2006
Posts: 4,067
Likes: 0
From: south wales rhondda
been down the garage for five to get some of the v power out of it and use in my other car and thought i would have a little nose at the engine
right here it goes lol after we heard the noise which sounds like a knock in the car park i drove it home and on the mountain the fan belt came off and i managed to get it back on but never looked right when i put it back as it was sitting funny on the idler so managed to creep home and get it in the garage
now when i looked at it tonight i felt the crank pulley and it was very loose so think the noise could have been the pulley as i unscrewed the crank pulley nut with my hand
so it might not be the bottom end after all and just that the crank pulley nut had worked it self loose that was causing the tapping noise and for my belt to come off
so will pick up new belt tomorrow after work and fit it and make sure crank pulleys nice and tight then start it up and let it run till warm and vary revs through out if its gone i will be a very happy guy but we will see
will keep you posted guys
right here it goes lol after we heard the noise which sounds like a knock in the car park i drove it home and on the mountain the fan belt came off and i managed to get it back on but never looked right when i put it back as it was sitting funny on the idler so managed to creep home and get it in the garage
now when i looked at it tonight i felt the crank pulley and it was very loose so think the noise could have been the pulley as i unscrewed the crank pulley nut with my hand
so it might not be the bottom end after all and just that the crank pulley nut had worked it self loose that was causing the tapping noise and for my belt to come off
so will pick up new belt tomorrow after work and fit it and make sure crank pulleys nice and tight then start it up and let it run till warm and vary revs through out if its gone i will be a very happy guy but we will see
will keep you posted guys
Thread Starter
Scooby Senior
iTrader: (12)
Joined: Apr 2006
Posts: 4,067
Likes: 0
From: south wales rhondda
thanks for the kind words guys
right guys been down the garage tonight and got the pulley bolt tight then replaced the old belt with a new one and then started up and all sounds fine, let it run up to temp and varied the rpm and sounded OK , so will take it for a blast in a day or so and re check and listen for noise but all sounds good so far and I'm very happy bunny at the moment
right guys been down the garage tonight and got the pulley bolt tight then replaced the old belt with a new one and then started up and all sounds fine, let it run up to temp and varied the rpm and sounded OK , so will take it for a blast in a day or so and re check and listen for noise but all sounds good so far and I'm very happy bunny at the moment
Thread Starter
Scooby Senior
iTrader: (12)
Joined: Apr 2006
Posts: 4,067
Likes: 0
From: south wales rhondda
Thread Starter
Scooby Senior
iTrader: (12)
Joined: Apr 2006
Posts: 4,067
Likes: 0
From: south wales rhondda
hi guys been messing about with the car a little and instead of running one pulley for tension of the alt/powerstreering I'm making a new bracket up and will post some pics of it soon
i have also got my hands on a cusco 6 point roll cage so will be fitting this and also selling my seats and replacing them with light weight bucket seats and good harnesses
and some pic's of my roof lining that i just recovered in black suede as there were afew marks and where i removed handles to fit cage left holes so recovered to hide these heres some pics


i have also got my hands on a cusco 6 point roll cage so will be fitting this and also selling my seats and replacing them with light weight bucket seats and good harnesses
and some pic's of my roof lining that i just recovered in black suede as there were afew marks and where i removed handles to fit cage left holes so recovered to hide these heres some pics


Last edited by The Stitcher; Sep 14, 2010 at 10:45 PM.
Thread Starter
Scooby Senior
iTrader: (12)
Joined: Apr 2006
Posts: 4,067
Likes: 0
From: south wales rhondda
right guys i got the pulley sorted and bit gutted that i cut the alternator bracket a while back as i cut where i could have put a pulley so made up a bracket and mounted it to that
never took pic's as i went along but here's it finished ( the pic shows the new fixed pulley to the right of intercooler pipe )




and some pics of the cage bolted in just need to tidy a few things up etc..




problem i found is now cage is in the gauges will not fit on drivers side so i removed my radio and will try fit then there
never took pic's as i went along but here's it finished ( the pic shows the new fixed pulley to the right of intercooler pipe )




and some pics of the cage bolted in just need to tidy a few things up etc..




problem i found is now cage is in the gauges will not fit on drivers side so i removed my radio and will try fit then there
Scooby Regular
iTrader: (12)
Joined: Jun 2007
Posts: 3,734
Likes: 0
From: 700+ WR1 aka The Vuvu Zela...10.6 @ 136 weighing 1370kg....say no more....
Thread Starter
Scooby Senior
iTrader: (12)
Joined: Apr 2006
Posts: 4,067
Likes: 0
From: south wales rhondda
thanks fella
had a great day today and so did my partner and daughter 
only took a few of the car as it was looking rather dirty after the long drive there


and as im welsh thought it would be funny to put a sheep in the car



had to have one of me and my daughter

and when we did the rev off and horns for r burns the anti lag left a little mark opps........
sorry

only took a few of the car as it was looking rather dirty after the long drive there



and as im welsh thought it would be funny to put a sheep in the car




had to have one of me and my daughter

and when we did the rev off and horns for r burns the anti lag left a little mark opps........
sorry



Anything in mind





