RB5SCOTT,

You drive with PPP and full open exhaust from ScoobySport. What problems you get with this combination??

Is an fuel controller needed instead of getting 'fuel cut'?

Want to know what is possible with an PPP car without big risk!

EvScooby

(from Holland and not having my car within few week... so not on PE)

 

Any more?

 

Damn, I'm not going to be able to make this one something has cropped up. Apologies, I know that you're trying to get the numbers up.

 

PCB, is this just a power run or a RR session?. I may be interested. UK300 PPP, no other mods..

 

evscooby,

No problems just more power
The fuel controller was needed to put more fuel in because it was running lean with the ported headers and induction kit

Simon, go on then, i'm in

Scott

 

I have managed to wangle the day off work, i'll be there

 

The following have confirmed for the Rolling Road day on the 2nd March at Power Engineering :-

PCB
DrEvil
phil stephens
ukhuskynox
simes (late run)
tezza
jasonRS500
jonno
DT
gareth
Matt Churchill (early run)
Matt Churchill (evo6) (early run)
Pete Croney
mbc
Scott J Davies
WRBlue
Trout
simonma
ollyshorey
RB5SCOTT
rich a


Cost will be £45 + vat BUT If we get to 30+ cars price comes down to £30 + vat.
If you are definately coming please confirm on this thread.
First 30 to confirm get the places.

nigel s, power run.

Simon

 

Sorry, coming late to this one. Is this MY01 only? assume it is by the title.

If not then I might be interested.

 

For anyone Markus, need to make up the numbers so we can get it nice and cheap

 

I would like to have my car RR'd,
I'll keep an eye on this thread.

2/3 is good for me,
rgds,
Andyp

 

who's marcus?

 

No problem,
see you on the 2nd Callum.

simon.

 

Markus,

So perhaps after the run we can start calling your car the Blackanimal, Blackdog, Blacksmalldog, Blackcat, Blackpussy or even Blackhampster (depending on the figures reached )

Callum, might have to run as well now so we've got a comparison on the same day - perhaps we could get Clive and Mike to run as well???

Matt

 

.....?
Matt....what r ya sayin like?

Yoo sayin I'm gettin' a birds car like


We'll see what happens when we spank the T35 on the day though
(anything over 320 will be a bonus)

Callum

 

Yeah deffo be interested in seeing what my modded MY01 has,
PPP,
Full Decat,
Scooby zaust except for Prodrive back box,
ITG thingy.

Not been to PE before but know the area well, look forward to it,

btw, Pete C better bring some tools and the dump valve I paid for before discovering they had sold out of them

Shane Wells.

 

Matt,

you coming??

Matt

 

Simon,put me down for this one. UK300 PPP. Is power easy to find, never been there before?.

 

Streetmap Link

PE Map1


PE Map2

and

PE Homepage

Callum

{edited to add 2 more maps}

[Edited by CallumW - 2/11/2002 10:52:17 PM]

 

This day is open to all not just MY01's, just trying to get as many MY01's together as possible for some same day/conditions comparisons. 26 cars confirmed so far, 4 more and we all get a cheaper day.

The following have confirmed for the Rolling Road day on the 2nd March at Power Engineering :-

PCB - MY01 PPP

DrEvil - MY01

phil stephens - MY01

ukhuskynox - MY01 PPP

simes (late run)MY01,ScoobySport d/p,c/s, Prodrive b/b,ITG

tezza

jasonRS500 - Cosworth

jonno - MY01 STi7

DT - MY01,ScoobySport full de-cat,u/p + ??

gareth

Matt Churchill (early run) - MY?,full ScoobySport de-cat,K&N

Matt Churchill (evo6) (early run) - EVO6

Pete Croney - MY01,full ScoobySport de-cat,forge dump valve, ITG + ?

mbc

Scott J Davies

WRBlue - MY01

Trout

simonma - MY01,TSL b/b,Graham Goode induction kit

ollyshorey - MY01

RB5SCOTT - MY01 PPP,full ScoobySport de-cat,u/p, APS induction,forge dumpvalve,ported headers,HKS fuel controller

rich a

Andy Porter

Markus - MY94 +?

CallumW

nigel s - MY01 PPP

G00n3r - MY01 PPP, full ScoobySport de-cat,ITG


Cost will be £45 + vat BUT If we get to 30+ cars price comes down to £30 + vat.
If you are definately coming please confirm on this thread.
First 30 to confirm get the places.



Simon



[Edited by PCB - 2/12/2002 7:10:31 AM]

[Edited by PCB - 2/12/2002 7:23:29 AM]

 

Simon,

Mine is a 99. The Evo has a full Magnex de-cat and a Blitz induction kit.

Matt, see you there m8 - better do something more to your car though, otherwise it'll have less power and less looks than mine

Matt

 

For the record;

MY94 WRX Wagon +
HKS 'green mushroom' induction kit
BPM Twindump Downpipe + Apexi N1 center and backbox, so fully decatted.
umm, that's it for 'performance' mods.

 

PCB

Just to amend the Spec on my car

PPP & ITG panel Filter fitted

Thanks

Phil

 

OK,

I've got my m8 Clive with his Elise 111S up for it....Just need to get Mike with his RB5WR involved....calling RB170, calling RB170...

Matt

 

Simon,

For the record my spec is MY01 Wagon + PPP.

That said, it's looking like I might have to work that day so please don't rely on me for achieving the 30+ breakpoint...

Gareth

 

mines a uk300ppp

 

This day is open to all not just MY01's, just trying to get as many MY01's together as possible for some same day/conditions comparisons. 27 cars confirmed so far, 3 more and we all get a cheaper day.

The following have confirmed for the Rolling Road day on the 2nd March at Power Engineering :-

PCB - MY01 PPP

DrEvil - MY01,HKS TiTip Hiper,Grasshopper Custom link pipe,ScoobySport 3" d/p pipe,Forge VTA d/v,ITG

phil stephens - MY01 PPP,ITG

ukhuskynox - MY01 PPP

simes (late run)MY01,ScoobySport d/p,c/s, Prodrive b/b,ITG

tezza

jasonRS500 - Cosworth

jonno - MY01 STi7

DT - MY01,full ScoobySport de-cat,u/p + ??

Matt Churchill (early run) - MY99,full ScoobySport de-cat,K&N

Matt Churchill (early run) - EVO6,full Magnex de-cat and a Blitz induction kit

Pete Croney - MY01,full ScoobySport de-cat,forge dump valve, ITG + ?

mbc

Scott J Davies

WRBlue - MY01

Trout

simonma - MY01,TSL b/b,Graham Goode induction kit

ollyshorey - MY01

RB5SCOTT - MY01 PPP,full ScoobySport de-cat,u/p, APS induction,forge dumpvalve,ported headers,HKS fuel controller

rich a - MY01 PPP

Andy Porter

Markus - MY94 WRX,HKS induction kit,BPM Twindump Downpipe + Apexi N1 center and backbox

CallumW

nigel s - MY01 PPP

G00n3r - MY01 PPP, full ScoobySport de-cat,ITG

mutant_matt - MY00,PPP back box

Clive - Elise 111S

Cost will be £45 + vat BUT If we get to 30+ cars price comes down to £30 + vat.
If you are definately coming please confirm on this thread.
First 30 to confirm get the places.



Simon


[Edited by PCB - 2/13/2002 7:58:47 AM]

 

Just three more to go.....

 

I'm in

Early run if poss please.

I wanna see what CallumW's car's putting out.... sounds cool
Spose we should see if he manages not to break it before the day.. isn't that right WWWWWEEEEEEEEEEEEMMMMMMMMM!!!!

Mike

(click..theres one)

[Edited by RB170 - 2/13/2002 10:17:33 AM]

 

Good Man.

 

Two to go then.....come on Chris/Sal, you know you want to