Porter Cable 7424 Machine Polisher
What plug end is on the 14m extension cable????
Same as you need to put on the PC, so a cheap rubber extension lead plug from B&Q should do, and then your only buggering about with the extention lead and not the PC itself.
Same as you need to put on the PC, so a cheap rubber extension lead plug from B&Q should do, and then your only buggering about with the extention lead and not the PC itself.
Scooby Regular
Joined: Aug 2004
Posts: 132
Likes: 0
From: Lisburn
Scooby Regular
Joined: Aug 2005
Posts: 5,585
Likes: 0
From: Bebind the wheel of my red rice rocket
mine was waiting for me when i got home - only had a very quick look. Can someone explain what you need to do to the cablese etc to get it going? (other than connect them
)
Cheers for the gb Nick
)Cheers for the gb Nick
Thread Starter
Scooby Regular
Joined: Sep 2005
Posts: 1,563
Likes: 0
From: Whitley Bay
Hi guys,
Easy Pippyrips, just cut off the 2 pin US plug from the PC. Strip the wire down, inside there'll be 2 wires, black and white. The black is positive and the white neutral. Open up the spare 110v plug shipped with the PC. There'll be 3 places where you can put the wires. You don't use the earth pin (the big one). Black wire goes to P+ and the white to 500v~ sign. Easy!
Nick.
Easy Pippyrips, just cut off the 2 pin US plug from the PC. Strip the wire down, inside there'll be 2 wires, black and white. The black is positive and the white neutral. Open up the spare 110v plug shipped with the PC. There'll be 3 places where you can put the wires. You don't use the earth pin (the big one). Black wire goes to P+ and the white to 500v~ sign. Easy!
Nick.
Thread Starter
Scooby Regular
Joined: Sep 2005
Posts: 1,563
Likes: 0
From: Whitley Bay
Yes, sorry, that's what I mean! There are three pins, two small and 1 large. The large is the earth, don't use that. So the black goes to the L/+, the white to the 500v~.
Nick.
Nick.
Scooby Regular
Joined: Aug 2005
Posts: 5,585
Likes: 0
From: Bebind the wheel of my red rice rocket
Thread Starter
Scooby Regular
Joined: Sep 2005
Posts: 1,563
Likes: 0
From: Whitley Bay
Exactly! Remember that you are meant to use the PC for 10 minutes and then let it cool for 5 mins. I just used mine for 5 mins and then waited 2 mins whilst I cleared the polish residue off with a microfibre towel.
Nick.
Scooby Regular
Joined: Aug 2005
Posts: 5,585
Likes: 0
From: Bebind the wheel of my red rice rocket
Thread Starter
Scooby Regular
Joined: Sep 2005
Posts: 1,563
Likes: 0
From: Whitley Bay
I've only done the bonnet on my GFs beater so far. I used PoorBoys SSR2.5 swirl remover. The difference between the bonnet and the wings is astounding. Reflections on the bonnet are crystal clear whilst the same reflection on the wings is blurred. Well worth the money! If the weather holds out today I might go back out and practise on her beater. I'm practising on hers before I go near my S2000!!!
Have fun, you'll soon get the hang of it, although take regular breaks unless your hands will start hurting from the vibration! Get some pics up of before and after!!!
Nick.
Have fun, you'll soon get the hang of it, although take regular breaks unless your hands will start hurting from the vibration! Get some pics up of before and after!!!
Nick.
Scooby Regular
Joined: Sep 2006
Posts: 178
Likes: 0
From: www.eyioc.co.uk
Thread
Thread Starter
Forum
Replies
Last Post
