Type R Corner
01 April 2013, 09:47 PM
#2131
Scooby Regular
iTrader: (2)
Join Date: Feb 2013
Location: Belgium
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Sure,
I'ts a non STI, I bought it in the UK in September last year, was freshly imported from Japan. Now I'm waiting to get it registered in Belgium, that takes ages!
Mods are:
-FMIC
-RCM Headers
-Walbro fuel pump
-550cc injectors
-Sytec FSE FPR
-Apexi Power FC, not hooked up for the moment
-Japspeed decat downpipe
-Fujitsubo legalis super R exhaust line
Getting it remapped as soon as i have my number plate
Regards
Sander
I'ts a non STI, I bought it in the UK in September last year, was freshly imported from Japan. Now I'm waiting to get it registered in Belgium, that takes ages!
Mods are:
-FMIC
-RCM Headers
-Walbro fuel pump
-550cc injectors
-Sytec FSE FPR
-Apexi Power FC, not hooked up for the moment
-Japspeed decat downpipe
-Fujitsubo legalis super R exhaust line
Getting it remapped as soon as i have my number plate
Regards
Sander
Last edited by SanderTypeR; 26 May 2013 at 10:34 PM.
01 April 2013, 10:02 PM
#2132
Nice spec, what turbo?
I have the same model. Mine runs 330 bhp is I think a sweet spot for road use. I prefer the ABS and slightly longer 5th gear to the STi. Plus I have Bilstein dampers paired with P1 springs which helps for UK demanding roads.
I have the same model. Mine runs 330 bhp is I think a sweet spot for road use. I prefer the ABS and slightly longer 5th gear to the STi. Plus I have Bilstein dampers paired with P1 springs which helps for UK demanding roads.
02 April 2013, 06:16 AM
#2134
Scooby Regular
iTrader: (2)
Join Date: Feb 2013
Location: Belgium
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Nice spec, what turbo?
I have the same model. Mine runs 330 bhp is I think a sweet spot for road use. I prefer the ABS and slightly longer 5th gear to the STi. Plus I have Bilstein dampers paired with P1 springs which helps for UK demanding roads.
I have the same model. Mine runs 330 bhp is I think a sweet spot for road use. I prefer the ABS and slightly longer 5th gear to the STi. Plus I have Bilstein dampers paired with P1 springs which helps for UK demanding roads.
What a stunning car you have! I would like to get 330 hp to. Mine had cusco coilovers, but i changed them into red kyb's and standard springs from a V5 STI.
26 May 2013, 09:28 PM
#2137
Scooby Regular
iTrader: (3)
Join Date: Jan 2003
Location: South Wales - Stuck on this rollercoaster, get me off!!
Posts: 5,350
Likes: 0
Received 0 Likes
on
0 Posts
My old Type R which I sold 6 months back and still miss, it appeared on the first page of this thread! Just a shame the pics 10 years ago do not work.
Si
Si
Last edited by simb 2; 26 May 2013 at 09:30 PM.
23 August 2013, 08:44 PM
#2141
Scooby Regular
iTrader: (9)
Join Date: Aug 2007
Location: bexhill east sussex
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
I have one now!v3 sti type r in sonic blue next to standard at the mo with only lowering springs
i have a phew mods this is what i have so far
17 revoution milleniums
K sports 330 mm
whiteline front anti roll bar with ally drop links
kn panel filter
decat and ss exhaust
255 fuel pump
Ss headers
alloy bonet spacers
p1 front bumper
2.5scd ready for rebuild
Samco upper and lower rad hoses
braided brake lines
flocked heater control and dash surround
alpine headunit
things iwant to do when funds and time allow
fit said items
new mafless ecu
get 2.5 built
silicone inlet hose
Body work needs a little tlc
Some oil pressure and temp gauges
i think thats it for the mo oh she already has v6rear spoiler and sparco dished sterring wheel
may the modding begin!!
i have a phew mods this is what i have so far
17 revoution milleniums
K sports 330 mm
whiteline front anti roll bar with ally drop links
kn panel filter
decat and ss exhaust
255 fuel pump
Ss headers
alloy bonet spacers
p1 front bumper
2.5scd ready for rebuild
Samco upper and lower rad hoses
braided brake lines
flocked heater control and dash surround
alpine headunit
things iwant to do when funds and time allow
fit said items
new mafless ecu
get 2.5 built
silicone inlet hose
Body work needs a little tlc
Some oil pressure and temp gauges
i think thats it for the mo oh she already has v6rear spoiler and sparco dished sterring wheel
may the modding begin!!
24 August 2013, 09:02 PM
#2145
Here's mine 
To go with the Bugeye
Its in a very sorry state at the mo, found out today she's been on this thread before, page 25.
Was sold in 2005 to ??? Then cannibalised at some point.
Going to slowly rebuild, trying to find all the right bits.
The day she arrived.
.jpg)
At the mo.
.jpg)
To go with the Bugeye
Its in a very sorry state at the mo, found out today she's been on this thread before, page 25.
Was sold in 2005 to ??? Then cannibalised at some point.
Going to slowly rebuild, trying to find all the right bits.
The day she arrived.
At the mo.
Last edited by Mortster; 24 August 2013 at 09:06 PM.
25 August 2013, 06:15 PM
#2147
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
I have one now!v3 sti type r in sonic blue next to standard at the mo with only lowering springs
i have a phew mods this is what i have so far
17 revoution milleniums
K sports 330 mm
whiteline front anti roll bar with ally drop links
kn panel filter
decat and ss exhaust
255 fuel pump
Ss headers
alloy bonet spacers
p1 front bumper
2.5scd ready for rebuild
Samco upper and lower rad hoses
braided brake lines
flocked heater control and dash surround
alpine headunit
things iwant to do when funds and time allow
fit said items
new mafless ecu
get 2.5 built
silicone inlet hose
Body work needs a little tlc
Some oil pressure and temp gauges
i think thats it for the mo oh she already has v6rear spoiler and sparco dished sterring wheel
may the modding begin!!
i have a phew mods this is what i have so far
17 revoution milleniums
K sports 330 mm
whiteline front anti roll bar with ally drop links
kn panel filter
decat and ss exhaust
255 fuel pump
Ss headers
alloy bonet spacers
p1 front bumper
2.5scd ready for rebuild
Samco upper and lower rad hoses
braided brake lines
flocked heater control and dash surround
alpine headunit
things iwant to do when funds and time allow
fit said items
new mafless ecu
get 2.5 built
silicone inlet hose
Body work needs a little tlc
Some oil pressure and temp gauges
i think thats it for the mo oh she already has v6rear spoiler and sparco dished sterring wheel
may the modding begin!!
so what gearbox are you going to go for? Are you going 6 speed, SC 5 speed gear set, PPG (though id rate the SC one better) or just hoping it lasts a few weeks with that extra torque from a 2.5 
26 August 2013, 09:54 AM
#2153
Scooby Regular
Join Date: Dec 2008
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
26 August 2013, 08:59 PM
#2155
Scooby Regular
iTrader: (9)
Join Date: Aug 2007
Location: bexhill east sussex
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
how long it lasts!im.aiming for 430/430 that will probably be enough for me!!
We ll have to see what funds allow!
27 August 2013, 10:39 PM
#2157
