cumbrian scoobs next meeting
#181
Lordy..
Sticky problem.. Do you know any local traders who might be willing to haggle a bit as you are well known in Carlisle ??
*cough*Gordon Box*cough* springs to mind.
I've an MR2 in the Garage for sale at a reasonable price
MR2 a Family friendly car
Midlife..
PS
Abbeylad...e-mailed JB and await reply
Sticky problem.. Do you know any local traders who might be willing to haggle a bit as you are well known in Carlisle ??
*cough*Gordon Box*cough* springs to mind.
I've an MR2 in the Garage for sale at a reasonable price
MR2 a Family friendly car
Midlife..
PS
Abbeylad...e-mailed JB and await reply
#182
Scooby Regular
Join Date: Jun 2002
Location: Didcot, South Oxfordshire
Posts: 1,999
Likes: 0
Received 0 Likes
on
0 Posts
was planning to run it into ground
If you buy a new recon engine, you get some warranty on it (I assume ) and you know the rest of the car is sound. spend the same money on a second hand car and the whole thing is an unknown quantity. If you are planning on keeping it another couple of years, get replacement engine...IMHO
If you are considering replacing engine to immediately sell whole car...just bin it instead
On a brighter note...was in Workington this evening and saw a rather tasty STi 5 in custard yellow I did wave but combined passing speed would have been >120mph and did not see them wave back. Sportsman was also rather busy tonight but they managed to squeeze Tia and I in a rather nice table in the corner
#184
Scooby Regular
Join Date: Sep 2002
Location: Cumbrian Scoobs
Posts: 2,616
Likes: 0
Received 0 Likes
on
0 Posts
Rusty, you probably wouldn't get a wave from him anyway, he's a arrogant s**t. That cars been prangged once and had a new motor in it cos he ran it on ordinary unleaded!
Who stamped your passport for these parts? It wasn't a CS meet was it?
Oh, BTW its an STi 6!
Who stamped your passport for these parts? It wasn't a CS meet was it?
Oh, BTW its an STi 6!
#185
Scooby Regular
Join Date: Jun 2002
Location: Didcot, South Oxfordshire
Posts: 1,999
Likes: 0
Received 0 Likes
on
0 Posts
Who stamped your passport for these parts?
I was up to check out a potential new employer, forgot I needed to get a work permit too
Thought that was teh same Custard STi I had heard popped an engine and stuufed it in a fence - sounds like he does not deserve it...should give it to me
#187
Scooby Regular
iTrader: (4)
Join Date: Nov 2002
Location: Here and there
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
Lordy, just a guess but i reckon all you`ll need is a new block as all the bits that bolt on the engine will be ok (won`t they???) Surely replacing a block can be done for 600 notes including the block. You don`t NEED a re-conned block, just a 2nd hand one. It was a few years ago but i had the block on an orion ghia replaced after the cam belt snapped and it cost £250
#188
Scooby Regular
Join Date: Sep 2002
Location: Cumbrian Scoobs
Posts: 2,616
Likes: 0
Received 0 Likes
on
0 Posts
Yeah Rusty, that Scoobs going for sale I hear. Something to do with err, driving with no insurance? And the last quote he got was something like £3700!
#190
Scooby Regular
iTrader: (4)
Join Date: Nov 2002
Location: Here and there
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
happy birthday to me, happy birthday to me..............
I know its hard to believe due to my youthfull good looks but i`m now 27!
Mark, what pads and discs should i be looking at getting? cheers
[Edited by Abbylad - 7/28/2003 12:47:08 PM]
I know its hard to believe due to my youthfull good looks but i`m now 27!
Mark, what pads and discs should i be looking at getting? cheers
[Edited by Abbylad - 7/28/2003 12:47:08 PM]
#193
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Midlife,
Guess what me and my missus are coming to see you on wednesday or I think its you there cant be many sean whiteheads in carlisle who work for the nhs.Its for the wife not me mate she showed me the letter and I saw the name and put 2&2 together. The wife is bothered now cos she knows what us scooby owners are like for modding so she thinks she will come away with a dump valve fitted in her gob instead of some tooth correction work,only joking mate.If it is you midlife I will see you wednesday.
Guess what me and my missus are coming to see you on wednesday or I think its you there cant be many sean whiteheads in carlisle who work for the nhs.Its for the wife not me mate she showed me the letter and I saw the name and put 2&2 together. The wife is bothered now cos she knows what us scooby owners are like for modding so she thinks she will come away with a dump valve fitted in her gob instead of some tooth correction work,only joking mate.If it is you midlife I will see you wednesday.
#194
Hi Gussy
I'l bring in the latest "Top Gear" mag for you to read at the same time...No True Grip for a couple of months now
I have a total catchment area of about six hundred thousand people so I guess meeting a Scooby owner had to happen sometime
Are you thinking of getting a new Turbo (TD05), it seems that Abbey lad and me are going the same sort of route for a bit more "get up and go"....safety in numbers
Midlife....
[Edited by midlife-crisis-scooby - 7/28/2003 9:40:39 PM]
I'l bring in the latest "Top Gear" mag for you to read at the same time...No True Grip for a couple of months now
I have a total catchment area of about six hundred thousand people so I guess meeting a Scooby owner had to happen sometime
Are you thinking of getting a new Turbo (TD05), it seems that Abbey lad and me are going the same sort of route for a bit more "get up and go"....safety in numbers
Midlife....
[Edited by midlife-crisis-scooby - 7/28/2003 9:40:39 PM]
#195
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
I will not be going the big turbo route yet Shaun,brakes will be first and then finish stiffening up the chassis handeling and stopping counts more than bhp in my mind anyway as I found on my old Harris magnum Z1000 but that was in my youth.......last year.....ok then when I was 20...22 years ago??god is it that long ago. see you on wednesday.
#196
Scooby Regular
Join Date: Sep 2002
Location: Cumbrian Scoobs
Posts: 2,616
Likes: 0
Received 0 Likes
on
0 Posts
Mark, what pads and discs should i be looking at getting?
#199
Scooby Regular
Join Date: Sep 2002
Location: Cumbrian Scoobs
Posts: 2,616
Likes: 0
Received 0 Likes
on
0 Posts
Just buy braided hoses, Pagid RS4.2 "blue" pads and some decent fluid like Silkolene Pro race 2000. If your discs need replacing buy group N ones from Questmead. By group N I mean standard. Ones with grooves or drilled holes are NOT group N, so I don't know why people try to sell them as such No need to go spending vast amounts of dosh when you can quite easily shop around and get just as good results!
#201
Scooby Regular
Join Date: Sep 2001
Location: www.cumbrianscoobs.co.uk/bbs
Posts: 4,042
Likes: 0
Received 0 Likes
on
0 Posts
gussy have a look in drivetrain, a have a look at a thread called Standalone ECU Monitor could be of some interest.....could take some time reading it all
mike
mike
#204
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
Mike,
I have just had a quick look at that thread very intresting when I get a spare half hour I will finish reading the rest and see what other ideas/plans they come up with.
I have just had a quick look at that thread very intresting when I get a spare half hour I will finish reading the rest and see what other ideas/plans they come up with.
#206
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: oop north in a spec-c.Now sold and starting on a classic ra track/sprint/road car
Posts: 2,536
Likes: 0
Received 7 Likes
on
7 Posts
No problem Mark I will pop round with them on thursday night and pickup the scaffold planks as well if your not about I will leave them on your doorstep ok.
#209
Scooby Regular
iTrader: (4)
Join Date: Nov 2002
Location: Here and there
Posts: 1,919
Likes: 0
Received 0 Likes
on
0 Posts
is ANYONE going like?
6:30pm Esso garage at Cockermouth for West Cumbrians????? let me know
Rusty, get on the blower to :-
NRL 01946 820002 www.nrl.co.uk
and possibly Rullion 01946 518900 about possible agency/contract IT/Software type jobs at BNFL Sellafield
Got to be worth a shot
[Edited by Abbylad - 7/9/2003 3:10:38 PM]
6:30pm Esso garage at Cockermouth for West Cumbrians????? let me know
Rusty, get on the blower to :-
NRL 01946 820002 www.nrl.co.uk
and possibly Rullion 01946 518900 about possible agency/contract IT/Software type jobs at BNFL Sellafield
Got to be worth a shot
[Edited by Abbylad - 7/9/2003 3:10:38 PM]
Thread
Thread Starter
Forum
Replies
Last Post
14500rpm
Suspension
15
18 September 2015 09:15 AM