They are

EGT is about 115 retail, if memory serves me correct, so it would be 12% less than this, and that price includes VAT

LOL Marc, its the first night im not working late

 

Steve,

Have you only got prices on 52mm and 65mm?? No deals on 60mm? The pod only takes 52 and 60, not 65.

 

Hi Omen

Autometer do not do 60mm Gauges, only 52mm & 65mm, I dont think any of the Scooby Regular dealers do pods for 65mm Gauges

You would probably have to get them from Autometer direct, or possibly Tsunami Racing in the uk

Steve

 

Hi Steve,

Can't see the Autometer ones Apexi, Defi etc are listed for Subaru, MY00, Interior, Gauges...

How much for shipping to Germany? And are the pods in grey (normal interior colour) or black?

Cheers
Richard

 

Re-Bitten here they are

http://www.j-spec.co.uk/Menu/autometer1.html

Not sure how much shipping to Germany would be, you could always phone Pete@ J-spec and ask, or drop him an email

The prices for the gauges are as my first post on this thread, and I believe the Pod is the same colour as the dashboard

Regards

Steve

 

Sonic,

These 60mm autometer deals are on the J Spec website....

Newage Scoob Single 60mm Phantom (White) Boost £105
Newage Scoob Twin 60mm Phantom (White) Boost and Oil Temp £165

http://www.j-spec.co.uk/Menu/pod1.html


[Edited by Omen - 5/15/2003 11:54:16 AM]

 

Can we order yet? I would like to be able to put these in at the weekend! Need to order today asap and hope they are in stock for next day delivery!

 

the 60mm are in fact the 65mm and we were hoping to get pods made up in this size for the larger gauge, unfortunately the pods have not yet arrived and the site hasn't been edited to reflect the size change.

 

Hi Pete,

Do you know how long it may be before the new 65mm pods arrive?

The above point aside, when would it be possible to start ordering?

As there are no 60mm it has made my mind up. I deffo wasnt the J-Spec triple centre pod to match UK MY98 dash with the 52mm Utltra lite gauges - boost, oil temp (e), oil press (e) and if poss any other bits and bobs required to fit.

Cheers.
Omen



[Edited by Omen - 5/15/2003 12:17:24 PM]

 

Aha! Pete Holt, the man himself from J-Spec

Steve, thanks for the link, but there are no prices there, just a picture saying that they do Autometer gauges...

Pete: can you confirm:
1) Price of EGT Autometer gauge 52mm
2) Colour of centre pod matches standard MY00 colour
3) Cost of shipping 3 gauges + pod to Germany

Money is here and waiting

Cheers + thanks for all the effort guys, much appreciated...
Richard

 

right, here is a reply from Pete, re EGT Prices, and the Defi Free standing Pod

EGT is £127.43 and the probe kit is an extra £20 odd quid from memory (will confirm when supplier opens, the EGT is about the most expensive gauge they do)

The Defi cups are made by defi themselves, they are little plastic cups that they supply with defi gauges when you buy them (they come in the gauge box), then you buy a mounting kit which is just a little piece of metal and a screw which attaches to the bottom of the cup and can be screwed or glued anywhere.

The problem with them is twofold tho, the cups are shaped specifically for Defi's and have a large indentation at the rear (which autometers don't have, autometers have two screw threads
at the rear for screwing them into dashboards etc and secondly the Defi fitting kit is approx £20 each inc vat so it would cost £60 just for the stands for the cups, not including purchasing the cups (which I can't see listed on my defi price list).

Many thanks for that Pete, and also for clearing up the 60mm - 65mm Gauges, personally I dont think Autometer themselves make it too clear on 60 mm gauges

Steve

 

And another update

We can now go ahead and place orders, if you send your order to Pete in an Email, or fax (and include your email in the fax, Pete will Mail you back to confirm the order)

Please state which gauges you require, ie Phantom/Ultra-Lite / 52mm / 65mm and any pods that you may require (triple pod/A-pillar pod/colour etc)

To be fair to everyone, I will email Pete a list of people, and requirements on Gauges, and ask that orders be processed in the order on here

Once you have ordered, if you can let me know, and I will keep the list updated, please quote your SN name to Pete too, so he can keep track also

email : pete@j-spec.co.uk
Tel: 07866-363356
Fax:01444-235209

Many Thanks

Steve

 

Cheers Sonic. I will have to pull out. Interesting about the stands, i might just have to save up and go Defi's and speak to J Spec when im ready

 

Steve, I have emailed Pete tonight and tried to phone him, no answer but it was 7pm which is a bit out of office hours. I'll try him tomorrow as I'm keen to get new gauges, just need a pod now

Cheers

Marc

 

Ok updated list again

1) Sonic (mail sent/ordered)
- AFR Gauge
- Oil Pressure (Elec)

2) Tone Loc
- Oil Pressure (Elec)
- Oil Temp (Elec)

3) dnb
- Oil Pressure (Elec)
- Oil Temp (Elec)

4) Trick
- Oil Pressure (Elec)
- Oil Temp (Elec)
- Boost

5) Omen
- Oil Pressure (Elec)
- Oil Temp (Elec)
- Boost

7) Ozzy
- Boost

8) Twigster
- Oil Temp (Elec)
- Boost
- AFR (Elec)

9) Leviathan
- Oil Temp
- Oil Press
- AFR

10) Mark R (mail sent/ordered)
- Oil Temp
- Boost
- Oil Press

11) Money (cancelled)
- Oil Temp
- Boost
- Oil Press

 

Ok updated list again

1) Sonic
- AFR Gauge
- Oil Pressure (Elec)
- Boost

2) Tone Loc
- Oil Pressure (Elec)
- Oil Temp (Elec)

3) dnb
- Oil Pressure (Elec)
- Oil Temp (Elec)

4) Trick
- Oil Pressure (Elec)
- Oil Temp (Elec)
- Boost

5) Omen
- Oil Pressure (Elec)
- Oil Temp (Elec)
- Boost

7) Ozzy
- Boost

8) Twigster
- Oil Temp (Elec)
- Boost
- AFR (Elec)

9) Leviathan
- Oil Temp
- Oil Press
- AFR

10) Mark R(provisional)
- Oil Temp
- Boost
- Oil Press

11) JamesN

-AFR (Phantom)
-Double a-pillar Pod

Thanks.

 

Sonic.......

YHM as per profile

Cheers.

 

Mad YHM Back

Updated List

1) Sonic (mail sent/ordered)
- AFR Gauge
- Oil Pressure (Elec)

2) Tone Loc
- Oil Pressure (Elec)
- Oil Temp (Elec)

3) dnb
- Oil Pressure (Elec)
- Oil Temp (Elec)

4) Trick
- Oil Pressure (Elec)
- Oil Temp (Elec)
- Boost

5) Omen
- Oil Pressure (Elec)
- Oil Temp (Elec)
- Boost

7) Ozzy
- Boost

8) Twigster
- Oil Temp (Elec)
- Boost
- AFR (Elec)

9) Leviathan
- Oil Temp (Elec)
- Oil Press (Elec)
- AFR

10) Mark R (mail sent/ordered)
- Oil Temp (Elec)
- Boost
- Oil Press (Elec)

11) Money (cancelled)
- Oil Temp (Elec)
- Boost
- Oil Press (Elec)

12) JamesN
- AFR Phantom
- Double A-Pillar Pod

13) Mad Scientist (provisional)
- AFR
- Oil Press (Temp)

Steve

 

Ok Peeps

people at the top of the list need to get the orders placed, as it is holding other people up from ordering now

if you havent ordered by tomorrow, then its going to have to be first come first served, as other people are waiting to order

There should be enough for everyone, but the bigger the list, it may take a little longer than the original quoted times to receive your gauges, Pods etc

Regards

Steve

 

Well ive been trying to ring and order all day!!!!!!!

I did want this stuff for the weekend but doesnt look likely now.

Edited to say Pete has now called me and order placed and payed for! Delivery for Tuesday. Cant wait!!!!


[Edited by Omen - 5/16/2003 5:48:54 PM]

 

Sorry - couldn't order today - I will do it first thing tomorrow morning. (Unless they are still open now...)

 

Phoned & ordered mine Sonic!
Cheers m8.

Gary.
Also edited to say that Pete sounds like a top bloke!

[Edited by Leviathan - 5/16/2003 7:31:33 PM]

 

Order is placed today, Pete seems like a really nice bloke, had a good chat with him, ran up works phone bill . Look forward to receiving my gauges. Thanks again to Steve for organising the group buy and Pete for supplying them.

Cheers

Marc

 

YHM again Sonic from differant address!!!

I can order tomorrow if you clear up my questions! Having bothered to read the whole thread I now only need to know about the sensors!

Cheers,

Mad

 

Steve,

YHM - Cube

 

Gonna be Monday morning for me to order.... im not in a rush for my gauges tho (as long as it doesn't take weeks ). So you can bump me down the list if you like.

Tony.

 

Looks like mine will be Monday as well - Pete obviously likes his weekends

I can see why, as I hate working weekends too.

Like Tone Loc, I'm not in a particular hurry, (again, not weeks...)

 

Looks like im out . I went to take the car in for a cambelt on Saturday but i had to take it back home as there were a few more things that needed doing (that needed parts ordering).... so it's back in on Tuesday. This will fleece me for this month so i'll have to drop out . Just hope it's not too expensive .

Bloody cars.

Tony.

 

*Sonic*

Any chance I could get in on this group buy? (or is it too late)

Darms.....

 

Im sure you could take my place.....

Tony.