If its GT30 based u will have same problem i had.

Check my previous posts to see picture of my problems.

 

You mean in the feed itself ? As they look like they both have a restrictor
On the end ?

 

Could just be a generic picture.
Reason i hate buying anything from ebay.

What i needed was a feed an6 - m10x1

Had to buy a small adapter too.
I have pictures of all the parts on my thread im sure.

M10x1 to an6 male adapter x1
Oil feed to suit x1
1mm oil restrictor for turbo. X1

 

Your set up is for non avcs the ones I've list from eBay are for avcs heads... Do you mean the gold restrictor,

Can you explain the problem you had with regard To if the feed is gt30 based

 

https://www.scoobynet.com/general-technical-10/1035207-new-turbo-new-injector-trouble-fitting.html

My problem with turbo oil feed

 

I have avcs mate. 2003 sti blobeye.
Was only meaning as that was the turbo i used.
May not be same solution for all.

Problem being finding one that fits lol

 

the links I put up come with Newage avcs fitting direct, so I don't think it should have the same issue you had although I no what u mean about eBay But if you look at the pics u can see the oil feed plugs direct on to the avcs / turbo oil feed on car...

Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )

 

Hard to explain this.


The hardline it claims to replace also goes to avcs on the block. So dont see how it does that.

I hope it works for ya but if u look at the pictures i put up u myt see.

Thers a banjo on the block which goes to two things. Up to turbo and around to block.

 

In the bottom left u can see where u unscrew the existing oil feed and join your braided one.

 

That's why one end should have a 12x1 female for the block side like said earlier. All you need is to find out the thread of the turbo then it'll be easy if it's like a garret it'll be 7/16ths but you'll have to check.

 

Yea exatly what they have lol.
Means no need for adapter.


It is garret based so will be that size.

Buy from HEL then you know its a decent product.

No ebay gambles. !!

 

Both feeds posted look good, we can make you an oil feed with stainless steel ends.

 

We can supply a male/ male garret adapter or a garret restrictor bolt for a banjo whichever is preferred.