Wheel Spacers on a Hawkeye..?
#33
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Hunting down door dinger's in south wales..
Posts: 2,485
Likes: 0
Received 2 Likes
on
2 Posts
Hi Steve
I have fitted the wheel spacers, and they make a huge difference to the appearance, I have not had chance to road test yet, as I have removed the Prodrive mud flaps, waiting for my new Rallytech ones to arrive and fit them before I put the wheels back on permanently
I will take a couple of pictures when it's all done
I have fitted the wheel spacers, and they make a huge difference to the appearance, I have not had chance to road test yet, as I have removed the Prodrive mud flaps, waiting for my new Rallytech ones to arrive and fit them before I put the wheels back on permanently
I will take a couple of pictures when it's all done
#34
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Hunting down door dinger's in south wales..
Posts: 2,485
Likes: 0
Received 2 Likes
on
2 Posts
An update !
The spacers have been fitted, and as far a I am concerned the make a huge difference to the appearance, I have taken the car out on a road test and everything seems fine, however i did not have anyone in the back of the car to weigh it down.
The pictures are not the best but it gives you an idea of the difference, i will put some tidy pictures up once the Rallytech mudflaps are fitted.
H&R 15mm hub centric wheel spacers
Before:
After:
Some after shots:
The spacers have been fitted, and as far a I am concerned the make a huge difference to the appearance, I have taken the car out on a road test and everything seems fine, however i did not have anyone in the back of the car to weigh it down.
The pictures are not the best but it gives you an idea of the difference, i will put some tidy pictures up once the Rallytech mudflaps are fitted.
H&R 15mm hub centric wheel spacers
Before:
After:
Some after shots:
#40
They look great! Any chance of a proper face on shot?
I've lowered my wrx 30mm all round (hsd coil overs) with some good spacers I'll have a nice stanced look.
I've lowered my wrx 30mm all round (hsd coil overs) with some good spacers I'll have a nice stanced look.
#41
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Hunting down door dinger's in south wales..
Posts: 2,485
Likes: 0
Received 2 Likes
on
2 Posts
I will take some more pictures and post them up tomorrow for you
Do you mean from the side..Or from the front ?
Do you mean from the side..Or from the front ?
Last edited by S3LDM; 19 February 2015 at 10:13 PM.
#45
Sorry matey, I meant from the front and hell why not from the back!
How much did you say you paid for the whole set? Also what does hubcentric mean and how do you find the offset of your alloy?
Questions questions sorry!
How much did you say you paid for the whole set? Also what does hubcentric mean and how do you find the offset of your alloy?
Questions questions sorry!
#46
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Hunting down door dinger's in south wales..
Posts: 2,485
Likes: 0
Received 2 Likes
on
2 Posts
The wheel spacers cost me £200 delivered £15 on copper grease, wire wool and thread lock, they are really easy to fit only took about an hour half and that's with cleaning up the hubs so the spacers sit nice and flat
this will explain hub centric and prove that they are the only ones to have
http://www.superforma.co.uk/hubcentric-explained
So I have taken a couple of quick pictures for you as requested:
thanks for the comments guys
this will explain hub centric and prove that they are the only ones to have
http://www.superforma.co.uk/hubcentric-explained
So I have taken a couple of quick pictures for you as requested:
thanks for the comments guys
Last edited by S3LDM; 25 February 2015 at 03:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
BHPvstorque
Subaru Parts
6
25 September 2015 10:15 PM