Back in a scoob
#278
Car is currently having its bodywork sorted then booked into with Richard Henry for a couple of bits and hopefully for a remap next month with Andrew Carr. No longer for sale so will be enjoyed thoroughly over summer, hoping to do a few trackdays/rwybs
#281
Cheers guys the aim is to get the wastegates piped optimally to allow a little more boost and aid spool. Few older pics I had saved
Some pics of the engine as it was built up in November 2013 (6 months use) after a strip down to change the headstuds
14/12 headstuds
Pinned block
Wire ringed 2.5 heads
Some pics of the engine as it was built up in November 2013 (6 months use) after a strip down to change the headstuds
14/12 headstuds
Pinned block
Wire ringed 2.5 heads
#286
#287
Scooby Regular
iTrader: (4)
Join Date: Sep 2007
Location: JDM MY97 Type R - 2.1 Stroker
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
I will have to find a climate control panel and get this done!
Only thing I am not clear on is the temperature side of things. I assume the temp readout is from the internal sensor in the dash. Would love to get an external temp reading from the climate control unit!
#289
Yep the temp is takien from the cabin sensor for the auto function on the unit but must be possible to locate a sensor somewhere to take the reading. The unit is from a forrester and come up on ebay from time to time.
http://www.ebay.co.uk/itm/SUBARU-FOR...gAAOSwVllXHleT
Frank she needs to look tidy from the rear as thats the view everyone gets to see
http://www.ebay.co.uk/itm/SUBARU-FOR...gAAOSwVllXHleT
Frank she needs to look tidy from the rear as thats the view everyone gets to see
Last edited by banny sti; 27 April 2016 at 03:22 PM.
#291
A tidy rear end and a rear wiper.... All sounds a bit gay to me
Could have been worse right enough... Could have been a P1!
Credit where credits due though Banny.. Me likely a lot!
Could have been worse right enough... Could have been a P1!
Credit where credits due though Banny.. Me likely a lot!
#292
Scooby Regular
iTrader: (4)
Join Date: Sep 2007
Location: JDM MY97 Type R - 2.1 Stroker
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
Whats involved with this, I see thats an Airtec RS500 intercooler. But what about the radiator, is it custom built or an off the shelf item?
Also, are you still running fans with that rad?
#295
Scooby Regular
iTrader: (4)
Join Date: Sep 2007
Location: JDM MY97 Type R - 2.1 Stroker
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
So you had the bottom outlet moved from the other side of the rad? Trying to get this clear in my head. Top hose is on the left side of the rad if looking from the front, and bottom hose is on the right side if looking at the rad from the front?
Its just in your picture, it shows the two hose connectors on the left side of the rad. I assume you had the mod to the out let done after that pic was taken?
What about the smaller outlet right at the top? Ive looked at other VR6 rads online and cant see any with the small outlet at the top.
#296
had to pull it away for a few days to have the gates repiped and a map check before a full map in a couple of weeks. Being finished this week will get some pics up soon
Its a good setup no issue with your copying it at all
That rad in the pic you posted is the wrong one, it was changed after that for a larger item.
This is the actual setup now with the correct rad, will get you more pics once I have it back
Thanks for that info mate, I like the look of that setup. Do you mind if I copy it?!
So you had the bottom outlet moved from the other side of the rad? Trying to get this clear in my head. Top hose is on the left side of the rad if looking from the front, and bottom hose is on the right side if looking at the rad from the front?
Its just in your picture, it shows the two hose connectors on the left side of the rad. I assume you had the mod to the out let done after that pic was taken?
What about the smaller outlet right at the top? Ive looked at other VR6 rads online and cant see any with the small outlet at the top.
So you had the bottom outlet moved from the other side of the rad? Trying to get this clear in my head. Top hose is on the left side of the rad if looking from the front, and bottom hose is on the right side if looking at the rad from the front?
Its just in your picture, it shows the two hose connectors on the left side of the rad. I assume you had the mod to the out let done after that pic was taken?
What about the smaller outlet right at the top? Ive looked at other VR6 rads online and cant see any with the small outlet at the top.
That rad in the pic you posted is the wrong one, it was changed after that for a larger item.
This is the actual setup now with the correct rad, will get you more pics once I have it back