Flex Fuel sensors
#1
Flex Fuel sensors
Bit of a niche one this...
If you run a Syvecs ECU, it has the capability of using a flex fuel sensor. These sensors measure the alcohol content (ethanol or methanol) and the Syvecs - when appropriately configured - will monitor the alcohol % and adjust the map accordingly.
In practice, this means you can have a map for VPower, and a map for Vpower + x% meth, and your Syvecs will automatically adjust for any meth % between the two. This means that you do not need to be be quite so accurate when mixing meth at the pump. Pretty cool IMHO!!
A flex fuel alcohol % gauge will also be available as a Toucan update in the next few weeks, so you can see what % you're running.
Sensors are in stock, and available with 4m cables for boot mounting, or 1.5m cables for engine bay. The sensor has 3/8" hard pipes as standard, and we also offer -6AN fittings if you need them.
Prices range from £185-£215+VAT depending on option.
If you want to know more...just ask!
If you run a Syvecs ECU, it has the capability of using a flex fuel sensor. These sensors measure the alcohol content (ethanol or methanol) and the Syvecs - when appropriately configured - will monitor the alcohol % and adjust the map accordingly.
In practice, this means you can have a map for VPower, and a map for Vpower + x% meth, and your Syvecs will automatically adjust for any meth % between the two. This means that you do not need to be be quite so accurate when mixing meth at the pump. Pretty cool IMHO!!
A flex fuel alcohol % gauge will also be available as a Toucan update in the next few weeks, so you can see what % you're running.
Sensors are in stock, and available with 4m cables for boot mounting, or 1.5m cables for engine bay. The sensor has 3/8" hard pipes as standard, and we also offer -6AN fittings if you need them.
Prices range from £185-£215+VAT depending on option.
If you want to know more...just ask!
#2
These are currently on sale! £140+VAT without AN6 fittings, or £150+VAT with
http://www.jti.uk.com/product/flex-fuel-sensor/
http://www.jti.uk.com/product/flex-fuel-sensor/
#4
Orange Club
iTrader: (11)
Hi. I don't believe the AlcaTek supports the flex fuel sensor unfortunately.
Current prices range from £132 delivered up to £204 delivered depending on fittings and cable length/connector required.
http://www.jti.uk.com/product-category/flex-fuel/
Current prices range from £132 delivered up to £204 delivered depending on fittings and cable length/connector required.
http://www.jti.uk.com/product-category/flex-fuel/
#6
Orange Club
iTrader: (11)
It is up to the ECU to work this out - Megasquirt certainly does, as do Syvecs and Haltech. So you can just wire it in, then set up the ECU.
As an aside, I will be adding Megasquirt support to Toucan in the coming months
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM