Installing STI 4 Pots
#1
Scooby Regular
Thread Starter
Join Date: May 2002
Location: Hanging around sussex
Posts: 563
Likes: 0
Received 0 Likes
on
0 Posts
Im goona be replacing my MY98 discs pads and calipers this weekend if I can find some pukka instructions...
Anyone know where i can get some????
Anyone know where i can get some????
#2
Scooby Regular
Join Date: Jul 2000
Location: Lancashire
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
Start with Front Brake Rotors Installation Instructions on I-club, on top if this you will be disconnecting the hoses and reconnecting to the new calipers and bleeding them.
You might consider fitting braided hoses whilst you've got the calipers off.
Email me if you have any questions.
Andrew...
[Edited to say, take the stone guards off as well as they can foul the larger discs and squeal like a really squeally thing, also helps cooling a bit]
[Edited by AndrewC - 28/05/2002 11:58:44]
You might consider fitting braided hoses whilst you've got the calipers off.
Email me if you have any questions.
Andrew...
[Edited to say, take the stone guards off as well as they can foul the larger discs and squeal like a really squeally thing, also helps cooling a bit]
[Edited by AndrewC - 28/05/2002 11:58:44]
#3
Scooby Regular
I did this conversion on my Legacy a month or so ago, it takes about an hour, including bleeding. All the bolts are the same, soit is a direct swap. Just make sure the area around the bake line coupling is clear before splitting it. The longest part of the job in my case was getting the ABS sensors out of the hubs so without damaging them, so I could swap the backplates. They had been there undisturbed for 8 years!
P.S. Handy tip (learned the hard way!), Make sure your wheels fit first.
P.S. Handy tip (learned the hard way!), Make sure your wheels fit first.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 07:49 AM