What's the science behind..........
#1
Scooby Regular
Thread Starter
iTrader: (14)
Join Date: Mar 2013
Location: Bedfordshire
Posts: 2,417
Likes: 0
Received 0 Likes
on
0 Posts
What's the science behind..........
Brake Fade.
being a poor 2.5 WRX owner I have suffered this, only once in a year, but enough to make me wonder what happens.
Obviously bakes work on friction, what causes the friction to fail?
Thought I'd start a topic that might be interesting and only possibly be slagged off for...
being a poor 2.5 WRX owner I have suffered this, only once in a year, but enough to make me wonder what happens.
Obviously bakes work on friction, what causes the friction to fail?
Thought I'd start a topic that might be interesting and only possibly be slagged off for...
Last edited by Cpt Jack Sparrow; 28 November 2013 at 08:23 AM. Reason: sausage fingers
#4
Scooby Regular
Join Date: Nov 2013
Location: Birmingham
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
;-)
The reduction of friction termed brake fade is caused when the temperature reaches the "kneepoint" on the temperature-friction curve and gas builds up between disc and pad. [All brake lining is cured under mechanical pressure following a heating & cooling curve backstroke, heating the friction material up to 450°F to "cure" (cross-link) the phenolic resin thermoset polymers: There is no melting of the binding resins, because phenolic resins are thermoset, not thermoplastic] In this form of fade, the brake pedal feels firm but there is reduced stopping ability. Fade can also be caused by the brake fluid boiling, with attendant release of compressible gases. In this type of fade, the brake pedal feels "spongy". This condition is worsened when there are contaminants in the fluid, such as water, which most types of brake fluids are prone to absorbing to varying degrees.
The reduction of friction termed brake fade is caused when the temperature reaches the "kneepoint" on the temperature-friction curve and gas builds up between disc and pad. [All brake lining is cured under mechanical pressure following a heating & cooling curve backstroke, heating the friction material up to 450°F to "cure" (cross-link) the phenolic resin thermoset polymers: There is no melting of the binding resins, because phenolic resins are thermoset, not thermoplastic] In this form of fade, the brake pedal feels firm but there is reduced stopping ability. Fade can also be caused by the brake fluid boiling, with attendant release of compressible gases. In this type of fade, the brake pedal feels "spongy". This condition is worsened when there are contaminants in the fluid, such as water, which most types of brake fluids are prone to absorbing to varying degrees.
Thread
Thread Starter
Forum
Replies
Last Post