BBS LM replicas
#2
Google BBS LM Replica,quite a few results,PCD 5x100,dont know if you will get 114 though,they are very nice wheels,I think they need a lot of care though as every set you see seem to look corroded
#3
Scooby Regular
Thread Starter
Join Date: Nov 2012
Location: Manchester
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I had tried that but the results return 5x100 fitments for a vw golf etc, I wasn't sure of the centre bore was the same and whether they would clear the brembos .. I had some lovely LM rellicas about 5-6rs ago on a anniversary mk4 golf and they were fine with tlc :-)
Chris
Chris
Last edited by Aparoon; 22 April 2013 at 08:13 AM.
Trending Topics
#10
Scooby Regular
Thread Starter
Join Date: Nov 2012
Location: Manchester
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. I had come across your thread and seen your car / wheels. Exactly what I'm after. I know the blobeye is 5x100 but it looks like the bore on the sti is 57.1 and the bore on the vw is 56.1. Struggling To get it clarified from sellers.
Did those wheels clear the brembos without any issue ? I'm going to call in a few places and try them , probably the easiest way ..
Chris
Did those wheels clear the brembos without any issue ? I'm going to call in a few places and try them , probably the easiest way ..
Chris
#15
An aftermarket wheel will normally have a centre bore of around 73mm iirc, you will just need to get the correct size spigot rings and will have no issues, as long as you get the correct PCD size
#16
Scooby Regular
Thread Starter
Join Date: Nov 2012
Location: Manchester
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
You got that the wrong way round mate, VW is 57.1 on all models and Subaru is 56.1
An aftermarket wheel will normally have a centre bore of around 73mm iirc, you will just need to get the correct size spigot rings and will have no issues, as long as you get the correct PCD size
An aftermarket wheel will normally have a centre bore of around 73mm iirc, you will just need to get the correct size spigot rings and will have no issues, as long as you get the correct PCD size
I've managed get 4 20mm spacers so going to try them on the standard wheels when my tein a techs are fitted. I'm too impatient to wait so had to sort something in the mean time ha
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Scooby-Doo 2
Subaru Parts
8
26 September 2015 02:09 PM