Caliper profiles?
07 May 2002, 12:43 PM
#1
Does anybody know where to get some caliper profile drawings so i can check if they will fit under my wheels? I've got the AP 6/4 pot ones off their website but wouldn't mind find brembo/Godspeed/Subaru 4 pot drawings.
I've checked the AP kits with my wheels (the dreaded Prodrive Superturismos
) and i will need 7mm shims/spacers to get clearence. Even then its a bit tight. Is the Brembo caliper any smaller, or would fitting a Subaru 4 pot kit be the best option (i.e is this smaller still?????)?
Cheers,
Tony.
P.s im not doing track days so maybe the expensive stuff is over the top????? Also don't want to change my wheels before anybody says that.
I've checked the AP kits with my wheels (the dreaded Prodrive Superturismos
) and i will need 7mm shims/spacers to get clearence. Even then its a bit tight. Is the Brembo caliper any smaller, or would fitting a Subaru 4 pot kit be the best option (i.e is this smaller still?????)?Cheers,
Tony.
P.s im not doing track days so maybe the expensive stuff is over the top????? Also don't want to change my wheels before anybody says that.
07 May 2002, 05:41 PM
#2
Scooby Regular
Join Date: Nov 2001
Location: Lansing, MI USofA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Tony, FWIW, I've talked to Ian @ Godspeed and they do not have any clearance templates for their kits. However, he said that they offset the rotor so as to move the caliper back away from the wheel and that he would guarantee that the 308mm kit would fit behind any 17" wheel. Hope this helps.
- Trent
- Trent
.
08 May 2002, 05:08 PM
#4
Scooby Regular
Join Date: Nov 2001
Location: Lansing, MI USofA
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Well, on the bright side, the 308mm Godspeed kit is still a better option than the Subaru 4-pots!
Maybe the Hi-Spec kits would fit? I've emailed Hi-Spec about a template but never got any reply. Cheers, mate.
- Trent
Maybe the Hi-Spec kits would fit? I've emailed Hi-Spec about a template but never got any reply. Cheers, mate.- Trent
. Keep me posted (pictures too
05 October 2002, 02:41 PM
#6
Scooby Regular
Join Date: Apr 2001
Location: Chester
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Tony,
As of tomorrow we should have a set of 325mm discs with godspeed 4 pots behind a prodrive superturismo!
Matt.
Edited to say; Without the aid of spacers and subaru 4 pots dont fit even on the standard disc size.
[Edited by Matt_Davies - 5/10/2002 2:43:44 PM]
As of tomorrow we should have a set of 325mm discs with godspeed 4 pots behind a prodrive superturismo!
Matt.
Edited to say; Without the aid of spacers and subaru 4 pots dont fit even on the standard disc size.
[Edited by Matt_Davies - 5/10/2002 2:43:44 PM]
Thread
Thread Starter
Forum
Replies
Last Post