Anyone make LARGER brembo conversion than 332mm?
#1
Anyone make LARGER brembo conversion than 332mm?
Hi, Am upgrading my standard 4 pots on my 06 WRX to 332mm Brembos from an 03 sti. The brembo calipers are much larger than the stock WRX calipers so will make a difference. As I am already running 18" wheels I was wondering if anyone did a larger disc conversion for brembo calipers without going to after market calipers. Say 335mm or something like that with the caliper spacers to suit?
Andy
Andy
#2
THE braking specialist
iTrader: (259)
The standard STi discs are 326mm , if you are going larger using the standard calipers , you have to bring the calipers out far enough to be able to fit a bracket in place to fit it back on , which means the calipers have to come out around 23-25mm , which would mean having to fit a disc size around 375mm , problem being is the STi calipers wont take a disc that big as the inside radius is wrong , the discs would hit the top and bottom inside the calipers before the pads sat properly on the discs
Cheers Ian
Cheers Ian
#4
THE braking specialist
iTrader: (259)
No Problem , the 335mm kit I make for the WRX subaru calipers can be done as the calipers have more room inside , and we also use a larger pad , so it fit in well , but couldn't do it with the STi calipers , wish I could as I'd sell loads of them !
Cheers Ian
Cheers Ian
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
alcazar
Computer & Technology Related
2
29 September 2015 07:18 PM