Even worse now,need some good advice?
Hello people,just to try and cut along story short,changed the pads on my 03 sti front and rear to the ebc blue ones and after the bedding in progress the brakes were still shocking,so i decided to speak to godspeed and i bought some of there grooved disks hel stainless hoses and a change of fluid,now the garage ive had them fitted at today,have said that there are two bleed valves?one on inside of the brembo and one on the outer,on the drivers front one he,s said that there wasnt a bleed valve on the inside of the caliper so he said they might be a bit spongy?
Now after taking it for a small test drive the brakes are even worse the pedal is pressed very low before any braking,alot lower than before and they do feel spongy as hell,now will this get better as the pads wear to the new discks?or could it be the front drivers caliper bean knackered and him not been able to bleed the brakes properly,also if i pump the brakes the pedal feel comes higher and seems abit better,anyone know where i can take my car to a proper subaru specialist as close to hull as possible as its starting to get exspensive trying to get the brakes better on my car,starting to wish id just bought a full big brake kit from somewhere,as im upto over 600 spent on brakes allready,any sound advice welcome thanks very much.
Now after taking it for a small test drive the brakes are even worse the pedal is pressed very low before any braking,alot lower than before and they do feel spongy as hell,now will this get better as the pads wear to the new discks?or could it be the front drivers caliper bean knackered and him not been able to bleed the brakes properly,also if i pump the brakes the pedal feel comes higher and seems abit better,anyone know where i can take my car to a proper subaru specialist as close to hull as possible as its starting to get exspensive trying to get the brakes better on my car,starting to wish id just bought a full big brake kit from somewhere,as im upto over 600 spent on brakes allready,any sound advice welcome thanks very much.Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Hi
It sounds like a bleed nipple has snapped off as there should be 2 bleed nipples at the top of the calipers , you will never bleed the brakes properly as they are , it needs fixing.
Any good engineering company can do this for you , I have a jig specially made to fix them on our CNC milling machine , if your stuck finding someone to do it , send the caliper to me and I can fix it for £30 plus delivery back to you.
Or if your not too far away , I can offer you a drive in / out service and fix it
Cheers Ian
It sounds like a bleed nipple has snapped off as there should be 2 bleed nipples at the top of the calipers , you will never bleed the brakes properly as they are , it needs fixing.
Any good engineering company can do this for you , I have a jig specially made to fix them on our CNC milling machine , if your stuck finding someone to do it , send the caliper to me and I can fix it for £30 plus delivery back to you.
Or if your not too far away , I can offer you a drive in / out service and fix it
Cheers Ian
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Just noticed your in Hull , so sending the caliper to me would be the cheapest sollution , I can fix it within an hour or receiving it , and get it shipped straight back to you the same day
Hi
It sounds like a bleed nipple has snapped off as there should be 2 bleed nipples at the top of the calipers , you will never bleed the brakes properly as they are , it needs fixing.
Any good engineering company can do this for you , I have a jig specially made to fix them on our CNC milling machine , if your stuck finding someone to do it , send the caliper to me and I can fix it for £30 plus delivery back to you.
Or if your not too far away , I can offer you a drive in / out service and fix it
Cheers Ian
It sounds like a bleed nipple has snapped off as there should be 2 bleed nipples at the top of the calipers , you will never bleed the brakes properly as they are , it needs fixing.
Any good engineering company can do this for you , I have a jig specially made to fix them on our CNC milling machine , if your stuck finding someone to do it , send the caliper to me and I can fix it for £30 plus delivery back to you.
Or if your not too far away , I can offer you a drive in / out service and fix it
Cheers Ian
What sort of money would something alot better than the brembo,s be?and can i get calipers to fit the disks ive bought off you ian,looking at really good brakes for not to much money,if thats possible.
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
There are no other calipers that will fit the discs you have had off me , your existing set up will be very good once the caliper is fixed and bled properly
Cheers Ian
Cheers Ian
Will be in touch tomorrow ian cheers,just hope i can take the caliper off ok cant be hard surely.lol
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
Nov 3, 2021 11:07 AM
Sambob
Engine Management and ECU Remapping
41
Nov 27, 2015 07:36 PM





