p.lambo

help have car jacked up but cant get disc off any know how ?

MIAMI

iTrader: (1)

Hi mate, just behind the disc shield as if youvlook at the bottom you will
See a gromit, remove it and there will be a little cog inthere.
Keep turning it until you can feel the disc spinning freely, this will push the
Shoes in so you can get the disc off. If they still dont come off then you will need to get a m8 bolt i think and screw into the two holes on the disc and tighten andvthey will come loose, im sure there was a thread with pics just try search if you havnt alreafy done so.

If you still get stuck pm me and ill call you to guide you through.

alcazar

iTrader: (2)

As above, wind the handbrake off first, then two M8 bolts into the tapped holes, turn finger tight, then each one a turn at a time until the disc comes off.

p.lambo

thanks guys got it off worked just how ya said . but couldnt get the hub apart to change the bearing but cant feel any play and its not making a noise so dont think it dose need changing but as iv got it mite pay and have it done as couldnt do it

D1CCY

Did you take the driveshaft out of the bearing to check it. When the shaft is bolted up in place it disguises a lot of play.