K-Sport & DS2500 Pads
09 September 2010, 09:14 AM
#1
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: Sep 2008
Location: Ellon, Aberdeenshire
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
K-Sport & DS2500 Pads
Does anybody in here have a DEFINITIVE list of the correct DS2500 pads to be used on the K-Sport Calipers?
I have the 356mm Front 8 pots and 356mm Rear 6 pots and am looking to go DS2500......
I think the correct for the front is 3077's and the rear is either 219's or another shout I recently heard was 216's??
Also- if anybody has any links/advice to where is the best place to pick these up from then that would be brilliant!
Cheers.
I have the 356mm Front 8 pots and 356mm Rear 6 pots and am looking to go DS2500......
I think the correct for the front is 3077's and the rear is either 219's or another shout I recently heard was 216's??
Also- if anybody has any links/advice to where is the best place to pick these up from then that would be brilliant!
Cheers.
09 September 2010, 04:50 PM
#2
Scooby Regular
Join Date: Oct 2003
Location: East Yorkshire
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Don't know about rears but the fronts as follows:
3077 17mm thick and 54mm deep.
3003 18mm thick do
3076 17mm thick and 50mm deep
3054 18mm thick do
3076 is normal pad for AP 5570 caliper that uses same pad as KS 8 pots. 18mm is too thick to fit in AP caliper with new discs, don't know about KS in this respect.
Also 8018 is Pagid equivalent shape to Ferodo 3076 and would allow you to use any of their compounds. Alyn at ASPerformance is a good source for these.
3077 17mm thick and 54mm deep.
3003 18mm thick do
3076 17mm thick and 50mm deep
3054 18mm thick do
3076 is normal pad for AP 5570 caliper that uses same pad as KS 8 pots. 18mm is too thick to fit in AP caliper with new discs, don't know about KS in this respect.
Also 8018 is Pagid equivalent shape to Ferodo 3076 and would allow you to use any of their compounds. Alyn at ASPerformance is a good source for these.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
