Anyone know where I can get these
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2001
Posts: 1,841
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know where I can get these
Speedline Corse wheels
Getting bad wheel vibration (when brakes not used!) over 70 miles and hour and it gets progressively worse - had it rebalanced twice and the third place checked the fronts and showed me that one of them was buckled
I have never hit a pot hole, though do a fair bit of trackwork and theres tonnes of speedhumps in London
Never heard of a wheel buckling before - maybe I've been lucky!!
Getting bad wheel vibration (when brakes not used!) over 70 miles and hour and it gets progressively worse - had it rebalanced twice and the third place checked the fronts and showed me that one of them was buckled
I have never hit a pot hole, though do a fair bit of trackwork and theres tonnes of speedhumps in London
Never heard of a wheel buckling before - maybe I've been lucky!!
Last edited by Fangoria; 15 August 2009 at 02:21 PM.
#2
Scooby Regular
iTrader: (6)
Join Date: Dec 2005
Location: Nr Grimsby
Posts: 2,641
Likes: 0
Received 0 Likes
on
0 Posts
What size are they 17/18?
I have 5, 7.5 x 17 et48
All sourced thru Bill Gwynne, Super helpful BTW.
I lent a mate my wheels while his where being refurbed and he dinged one........
But after a few weeks Bill Gwynne managed to source one 2nd hand but it had only ever had a tyre on and been sat in the back of a rally car. I think he paid 70 quid to his door.
I have 5, 7.5 x 17 et48
All sourced thru Bill Gwynne, Super helpful BTW.
I lent a mate my wheels while his where being refurbed and he dinged one........
But after a few weeks Bill Gwynne managed to source one 2nd hand but it had only ever had a tyre on and been sat in the back of a rally car. I think he paid 70 quid to his door.
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2001
Posts: 1,841
Likes: 0
Received 0 Likes
on
0 Posts
18 inch
215/35 profile on them
Going to swap one of the rears, as its 'less buckled'.................
May end up changing all 4 as really need 19's to clear the Porsche 6 Pots without a 3mm spacer
215/35 profile on them
Going to swap one of the rears, as its 'less buckled'.................
May end up changing all 4 as really need 19's to clear the Porsche 6 Pots without a 3mm spacer