Legacy 2.5 seized caliper guide pins
#1
Legacy 2.5 seized caliper guide pins
On my front brakes (both sides )I have a seized lower guide pins on each caliper. This has caused the pads to wear asymmetrically. I have tried to free the pin up but no joy so may need to go route of replacement caliper support bracket and pin. Can anyone recommend a breakers that might keep these? Subaru dealer wants £59 + vat each for the support bracket.
Any other tips to free the pins off welcomed. So far I have used penetrating oil/spray, hitting with hammer and trying to lever free with large wrench - no joy.
Any other tips to free the pins off welcomed. So far I have used penetrating oil/spray, hitting with hammer and trying to lever free with large wrench - no joy.
#2
Scooby Regular
iTrader: (29)
Join Date: Aug 2006
Location: aberdeenshire
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
is it pin that bolt passes throught to attach to caliper to mount?
if it is surprised they havent moved with what you have used. maybe try some heat but take care of caliper as its cast. if you do get them out you will get new bits here:
Car Brakes – Brake Parts for Cars or phone godspeed
but caliper is useless if you dont get old bit out..
if it is surprised they havent moved with what you have used. maybe try some heat but take care of caliper as its cast. if you do get them out you will get new bits here:
Car Brakes – Brake Parts for Cars or phone godspeed
but caliper is useless if you dont get old bit out..
Thread
Thread Starter
Forum
Replies
Last Post