MY07 WRX Alloys
#1
Scooby Regular
Thread Starter
Join Date: Jun 2001
Location: Bristol
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
MY07 WRX Alloys
I have a MY07 WRX and would like some new alloys, want to stay with 17" one's and have been told that the Hawkeye's have a different stud pattern or pitch that the blobeye etc. This confuses me when I see some for sale that say they will fit a MY01 - 07 ? Is it just the Hawkeye STi thats different ?
What is my wheels width etc ?
Any help would be appreciated
Thanks
What is my wheels width etc ?
Any help would be appreciated
Thanks
#2
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Shows how ignorant some people are , but generally STI Hawkeye 5x114.3 mm and 8x17 IIRC The WRX is still 5x100mm and 7x17 I think. Earlier cars are 5x100 mm and 7.5x17 for an STI and 7x17 for a WRX.
WATCH OUT FOR THE OFFSET, USE A SCOOBY SPECIALIST IF WORRIED !
Or a seriously switched on wheel dealer.... Hope this helps
Dunx
WATCH OUT FOR THE OFFSET, USE A SCOOBY SPECIALIST IF WORRIED !
Or a seriously switched on wheel dealer.... Hope this helps
Dunx
#4
Scooby Regular
Join Date: Oct 2003
Location: East Yorkshire
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Standard Blob STi is 53mm, AFAIK they are all the same. 18" PFF7s are 51mm and are OK, I have a spare set of wheels (225/40/18) that are 45 mm and just catch the rubber strips in the Blob wheel arches, just OK with strip removed.
#6
Scooby Regular
iTrader: (11)
Not sure on the width but the wheels you need are 5x100, offset 48.
Have you found any (lighter) wheels to replace with?
I am thinking of doing the same but haven't decided whether to stay with the 17" or go 18". For better all round driving 17" would be better I believe.
Have you found any (lighter) wheels to replace with?
I am thinking of doing the same but haven't decided whether to stay with the 17" or go 18". For better all round driving 17" would be better I believe.
#7
I have just fitted a set of OZ Superleggera 18"x7. 5x100pcd. 45mm Offset. to my MY06 WRX Sportwagon. I was worried about the Offset as I took a risk and bought them off of Ebay. I was only worried about caliper clearance but no problem. It is a little closer but I checked all the way round and plenty of clearance. If I have any problems I will put either a 3mm spacer or 5mm. It looks awesome. If I can figure out how to put a picture up I will. I also have Prodrive Suspension for reference. Just to be clear not all wheels of 45mm Offset will clear I took a risk on this. And I may not be able to fit the big brakes I want later on!
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM