Brake pad fitting guide
#2
Scooby Regular
Join Date: Dec 2006
Location: at the petrol station again!!!
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
if it has the 4 pots they are simple mate
once wheel is off you will see a spring clip remove it and push the securing pins out then lever pads out of caliper
make sure brake resavoir cap is off and gently push the pistons back
install pads in reverse and then gently pump the brake pedal until it goes firm
remember to remove the anti squeel shims from old pads to the new ones if they are not supplied
this is assuming you have four pots not sure how brembo fit just take your time i dont suppose they can be that much different
once wheel is off you will see a spring clip remove it and push the securing pins out then lever pads out of caliper
make sure brake resavoir cap is off and gently push the pistons back
install pads in reverse and then gently pump the brake pedal until it goes firm
remember to remove the anti squeel shims from old pads to the new ones if they are not supplied
this is assuming you have four pots not sure how brembo fit just take your time i dont suppose they can be that much different
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM