Rear Brakes
#1
Scooby Regular
Thread Starter
Join Date: Jan 2001
Location: Stockton-on-Tees
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Hi, posted this on IWOC, but got no response, can anyone help?
Rear brakes on my MY98 are due for replacing (discs and pads).
I have seen some Jap models with vented discs (as opposed to solid) c/w what looks like the sliding caliper as fitted previous to the 00 model (vented discs with 2 pot 'Subaru' caliper?).
Does anyone know if the vented disc is a straight replacement or is there mods required, or would you advise trying to get hold of some late model 2 pot calipers and discs.
I think I heard that the caliper will take a wider disc, or is that only the fronts ?? (already gone to 4 pots on the front).
Do somebody like Hi-Spec or Godspeed do something that might fit the bill?
Ta,
Neil
Rear brakes on my MY98 are due for replacing (discs and pads).
I have seen some Jap models with vented discs (as opposed to solid) c/w what looks like the sliding caliper as fitted previous to the 00 model (vented discs with 2 pot 'Subaru' caliper?).
Does anyone know if the vented disc is a straight replacement or is there mods required, or would you advise trying to get hold of some late model 2 pot calipers and discs.
I think I heard that the caliper will take a wider disc, or is that only the fronts ?? (already gone to 4 pots on the front).
Do somebody like Hi-Spec or Godspeed do something that might fit the bill?
Ta,
Neil
#2
I cannot tell from experience. But comparing the 2 side by side I dont think the vented disc will replace the solid one. You will probably need calipers too. Speak to one of the brake places, they should help you out.
#4
THE braking specialist
iTrader: (259)
The two pot calipers and discs will not fit your car , the axle's are different , If you want to change from the solid discs to vented disc they will fit , but you need the wider single piston calipers to go with them , the calipers are identical in size and pad size but they are wider to take the wider vented disc , Hope this helps , Ian
#5
Scooby Regular
Thread Starter
Join Date: Jan 2001
Location: Stockton-on-Tees
Posts: 365
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, Ian , do you do a drilled/grooved replacement solid disc or a big disc kit for the rear. Might even fit some drilled/grooved discs to the front. Do your replacement front discs (296mm) come with alloy bells? Maybe you could email some prices at - robbo64@orange.net
Thanks,
Neil.
ps, one more thing, can you get DS2500 for my type of rear calipers now (and 4-pots), could only get EBC 'standard' stuff last time.
Thanks,
Neil.
ps, one more thing, can you get DS2500 for my type of rear calipers now (and 4-pots), could only get EBC 'standard' stuff last time.
Thread
Thread Starter
Forum
Replies
Last Post
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM