18" GOLD OZ WHEELS
#2
Scooby Regular
Join Date: Jun 2002
Location: Stoke-on-Trent
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
If they are the standard fit UK300 P-WRC1 wheels, then yes.!
I've got the 6 pot 355mm x 32mm kit on my UK300. I can send some pics if you wish.
They are ET53. There is a template you can download, print and cut out on AP's webpage and try inside a wheel if you wish.
You'll also need to replace the front wheel studs as the AP bells are slightly thicker than the subaru ones. You need at least 9 full turns of thread engagement. you'll find you'll only have 6 turns after changing to the AP kit on the standard studs. It's quite easy to replace the studs whilst fitting the AP kit.
Best regards,
Ian
I've got the 6 pot 355mm x 32mm kit on my UK300. I can send some pics if you wish.
They are ET53. There is a template you can download, print and cut out on AP's webpage and try inside a wheel if you wish.
You'll also need to replace the front wheel studs as the AP bells are slightly thicker than the subaru ones. You need at least 9 full turns of thread engagement. you'll find you'll only have 6 turns after changing to the AP kit on the standard studs. It's quite easy to replace the studs whilst fitting the AP kit.
Best regards,
Ian
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM