Hi, could someone tell me if the later scoobys (with brembos)have an adaptoror plate that goes onto the hub and then to the caliper, or does the caliper bolt straight on to the front hub?
As i have got, some large four pot brembos, and they wont fit as the bolt holes are a few mill out! (was told they would bolt straight on )
Does any one know where i could get an adaptor plate/ fixing kit, i have tryed most retailers that sell the big brake kit, but they only want to sell as a kit.
ps The vehicle is a 95 RA going to be used for track days.
I am at my wits end with this one, as no one seems to know anything, retailers. etc.Many Thanks lads Paul

 

from what i can gather from this site is that brembos of a sti are a straight swop for the front anyway
although i think there is a differance on the latest sti my06?
im sure some1 on will know though

steve

 

The gold brembo calipers bolt straight onto the hub on MY02 STi's and MY04 STi's, no adaptor plate.

Are you sure your Brembo's are from an STi?

 

thanks for the quick replys.
I think the brembos are from one of the big brake kits that u see advertised, i have seen somone on the forum who makes the adaptor, but i cant find it now. DOH

 

I have Gold STI brembo off an 06 Spec c on my classic (my99), and they were a streight swap, had to have the disc redrilled for the 5x100 PCD

 

Did you use the bolts supplied with the Brembo's or did you use the Subaru 4-pot bolts.

Reason I ask is that my 4-pot bolts appear to be a different thread to the Brembo's bolt holes.

 

Hi Who re-drilled the PCD for you?

 

My calipers came with the bolts so used these.

Godspeed redrilled the PCD for me, I also had them grooved at the same time as I prefer the look. Cost me about £75 for both jobs



www.godspeedbrakes.co.uk he's localish to me