Help!brembo adaptor plate
#1
Scooby Regular
Thread Starter
Join Date: Jul 2006
Location: bedford
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Help!brembo adaptor plate
Hi, could someone tell me if the later scoobys (with brembos)have an adaptoror plate that goes onto the hub and then to the caliper, or does the caliper bolt straight on to the front hub?
As i have got, some large four pot brembos, and they wont fit as the bolt holes are a few mill out! (was told they would bolt straight on )
Does any one know where i could get an adaptor plate/ fixing kit, i have tryed most retailers that sell the big brake kit, but they only want to sell as a kit.
ps The vehicle is a 95 RA going to be used for track days.
I am at my wits end with this one, as no one seems to know anything, retailers. etc.Many Thanks lads Paul
As i have got, some large four pot brembos, and they wont fit as the bolt holes are a few mill out! (was told they would bolt straight on )
Does any one know where i could get an adaptor plate/ fixing kit, i have tryed most retailers that sell the big brake kit, but they only want to sell as a kit.
ps The vehicle is a 95 RA going to be used for track days.
I am at my wits end with this one, as no one seems to know anything, retailers. etc.Many Thanks lads Paul
#2
Scooby Regular
Join Date: Jul 2002
Location: birmingham
Posts: 1,579
Likes: 0
Received 0 Likes
on
0 Posts
from what i can gather from this site is that brembos of a sti are a straight swop for the front anyway
although i think there is a differance on the latest sti my06?
im sure some1 on will know though
steve
although i think there is a differance on the latest sti my06?
im sure some1 on will know though
steve
#4
Scooby Regular
Thread Starter
Join Date: Jul 2006
Location: bedford
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the quick replys.
I think the brembos are from one of the big brake kits that u see advertised, i have seen somone on the forum who makes the adaptor, but i cant find it now. DOH
I think the brembos are from one of the big brake kits that u see advertised, i have seen somone on the forum who makes the adaptor, but i cant find it now. DOH
#5
Scooby Regular
iTrader: (7)
Join Date: Oct 2003
Location: Stealth mode on
Posts: 5,277
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 5cby
from what i can gather from this site is that brembos of a sti are a straight swop for the front anyway
although i think there is a differance on the latest sti my06?
im sure some1 on will know though
steve
although i think there is a differance on the latest sti my06?
im sure some1 on will know though
steve
#6
Scooby Regular
iTrader: (2)
Originally Posted by DannyBoy007
I have Gold STI brembo off an 06 Spec c on my classic (my99), and they were a streight swap, had to have the disc redrilled for the 5x100 PCD
Reason I ask is that my 4-pot bolts appear to be a different thread to the Brembo's bolt holes.
#7
Originally Posted by DannyBoy007
I have Gold STI brembo off an 06 Spec c on my classic (my99), and they were a streight swap, had to have the disc redrilled for the 5x100 PCD
Hi Who re-drilled the PCD for you?
Trending Topics
#8
Scooby Regular
iTrader: (7)
Join Date: Oct 2003
Location: Stealth mode on
Posts: 5,277
Likes: 0
Received 0 Likes
on
0 Posts
My calipers came with the bolts so used these.
Godspeed redrilled the PCD for me, I also had them grooved at the same time as I prefer the look. Cost me about £75 for both jobs
www.godspeedbrakes.co.uk he's localish to me
Godspeed redrilled the PCD for me, I also had them grooved at the same time as I prefer the look. Cost me about £75 for both jobs
www.godspeedbrakes.co.uk he's localish to me
Thread
Thread Starter
Forum
Replies
Last Post
bluebullet29
General Technical
9
05 October 2015 02:17 PM